GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Octopus/Octoplus > Octoplus FRP Tool

Reply
 
LinkBack Thread Tools Display Modes
Old 10-23-2019, 12:20   #4981 (permalink)
No Life Poster
 
fethirx's Avatar
 
Join Date: Dec 2010
Location: algeria
Posts: 507
Member: 1480336
Status: Offline
Sonork: 100.1606959
Thanks Meter: 34

Platform: XIAOMI
Selected model: REDMI NOTE 4X
Please, select one of the options for "Reset Mi Account" operation or press Ok to continue...
Go to "Wi-Fi Settings" and forget connected Wi-Fi network or perform Wipe Data from recovery
Put the phone into EDL mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint after 3-5 seconds.
Found phone on COM279
Mode: Qualcomm 9008
Connecting...
Reading info...
QC HW ID: 000460E100000000
QC CPU: Snapdragon 625 MSM8953
QC SW VER: 00000000
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Reading partition...
Reading info...
Brand: xiaomi
Model: Redmi Note 4
Device: mido
Platform: msm8953
Android version: 7.0
Display ID: AL1512-mido-build-20190128095656
Firmware version: V10.2.3.0.NCFMIXM
Resetting Mi Account...
On Your device detected FRP Lock! Reset it?
Reading MI part...
Writing MI part...
Resetting FRP lock..
Rebooting phone
Backup saved as xiaomi_Redmi Note 4_23-10-2019_13-00-46.dump file
Please power phone ON and enable "USB Debugging" then press "OK" button!

If operation wasn't completed, then Your device get re-locked and credits aren't refundable!
Searching for a phone (waiting for ADB device)...
Please, press "OK" button on the phone to allow USB debugging..
Phone found.
Reading info...
Phone model: Xiaomi Redmi Note 4
SW version: NRD90M
Date: Mon Jan 28 09:56:54 WIB 2019
Android version: 7.0
Baseband 953_GEN_PACK-1.148143.1.163979.1
Disabling Mi Services...
Mi Account is successfully reseted!
Performed by 1.8.0.0 Software versio
  Reply With Quote
Old 10-23-2019, 13:08   #4982 (permalink)
No Life Poster
 
Dr_Wolodya's Avatar
 
Join Date: Jul 2004
Location: Ukraine
Age: 40
Posts: 2,381
Member: 75408
Status: Offline
Thanks Meter: 968
Xiaomi Redmi Go (8.1.0) Reset FRP successfully done:
Code:
Welcome to Octoplus FRP Tool v.1.8.0.0
Platform: XIAOMI
Selected model: REDMI GO
Please, power phone OFF put the phone in EDL mode and connect USB cable.
Found phone on COM1249
Mode: Qualcomm 9008
Connecting...
Reading info...
QC HW ID: 000560E100000000
QC CPU: Snapdragon 425 MSM8917
QC SW VER: 00000000
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Reading partition...
Reading info...
Brand: Xiaomi
Model: Redmi Go
Device: tiare
Android version: 8.1.0
Display ID: OPM1.171019.026.V10.2.5.0.OCLMIXM
Firmware version: V10.2.5.0.OCLMIXM
Resetting FRP lock..
Searching for signatures...
FRP lock is successfully reseted!
Rebooting phone
Backup saved as Xiaomi_Redmi Go_23-10-2019_14-46-39.dump file
Performed by 1.8.0.0 Software version.
  Reply With Quote
Old 10-23-2019, 15:28   #4983 (permalink)
Freak Poster
 
GolfGSM's Avatar
 
Join Date: Aug 2019
Location: GuanGzhou-China
Posts: 361
Member: 2924041
Status: Offline
Thanks Meter: 131
Platform: LG
Selected model: M400DK
Put the phone into Download Mode:
1. Power phone OFF;
2. Press and hold "Vol+" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM209
Reading info...
Detected phone model: LG-M400DK
Mode: Emergency
Initializing..
SW version: LGM400DKAT-00-V10c-SEA-XX-NOV-30-2017+0
Android version: 7.0
Platform: mt6750
Reset FRP operation for M400DK will delete all user data on the phone (contacts, pictures and others)!
Do You want to continue?
Reading partition...
Detecting writing method...
Trying to repeat..
Trying third method...
Resetting FRP lock..
Writing loader...
Writing userdata...
Formating encrypt section
Restoring loader...
Perform factory reset to complete operation!
FRP lock is successfully reseted!
Performed by 1.8.1.0 Software version.
  Reply With Quote
Old 10-24-2019, 12:09   #4984 (permalink)
Freak Poster
 
GolfGSM's Avatar
 
Join Date: Aug 2019
Location: GuanGzhou-China
Posts: 361
Member: 2924041
Status: Offline
Thanks Meter: 131
successfully Brand: mycell Model: iRON5

Formating User Data


Platform: __GENERAL RESET FRP METHODS
Selected model: MTK GENERAL
Please, reconnect battery, press and hold "Vol+" or "Vol-" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM3
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.11
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .4D010104.30304430.00B81131.F34629B7
eMMC Flash: Unknown: 00D0
DA ver: 4.2.9C
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 14800 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: mycell
Model: iRON5
Device: iRON5
Platform: mt6580
Android version: 7.1
Display ID: l600v90_txd_x6_mycell_iron5_480x960_en_yl_v01
Factory Reset...
Formating User Data section
Factory Reset is successfully performed!
Backup saved as mycell_iRON5_24-10-2019_17-08-01.dump file
Performed by 1.8.1.0 Software version.





Resetting FRP lock..


Welcome to Octoplus FRP Tool v.1.8.1.0
Platform: __GENERAL RESET FRP METHODS
Selected model: MTK GENERAL
Please, reconnect battery, press and hold "Vol+" or "Vol-" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM3
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.11
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .4D010104.30304430.00B81131.F34629B7
eMMC Flash: Unknown: 00D0
DA ver: 4.2.9C
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 14800 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: mycell
Model: iRON5
Device: iRON5
Platform: mt6580
Android version: 7.1
Display ID: l600v90_txd_x6_mycell_iron5_480x960_en_yl_v01
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as mycell_iRON5_24-10-2019_17-06-57.dump file
Performed by 1.8.1.0 Software version.
  Reply With Quote
Old 10-25-2019, 06:35   #4985 (permalink)
Freak Poster
 
Join Date: Sep 2014
Location: philippines
Posts: 171
Member: 2256970
Status: Offline
Thanks Meter: 55
0ppo f7 pattern done



Platform: OPPO
Selected model: F7 (CPH1819)
Put the phone into Brom mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint after 3-5 seconds.
Searching for a phone. Please wait...
Operation was canceled
Performed by 1.8.1.1 Software version.

Platform: OPPO
Selected model: F7 (CPH1819)
Put the phone into Brom mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint after 3-5 seconds.
Searching for a phone. Please wait...
No diagnostic ports found!
Operation was failed!
Performed by 1.8.1.1 Software version.

Platform: OPPO
Selected model: F7 (CPH1819)
Put the phone into Brom mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint after 3-5 seconds.
Searching for a phone. Please wait...
Found phone on COM16
Detecting Chip Version...
HW Chip: MT6771: 0788.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: 05
BootLoader Version: FE
Sending auth...
Sending Auth Data...
Target Config: 0x000000E5
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_Octoplus_Oppo_v.1, n.1
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
Mobile Status: SYNC
Mobile Status: brom
Sending BootLoader Info...
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Mobile Status: SYNC
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 59640 Mb
eMMC Flash: .15010044.4836444D.4205BA20.6A75A459
eMMC Flash: Samsung: DH6DMB
Internal RAM size: 256 Kb
External RAM size: 3072 Mb
Reading partition...
Reading info...
Android version: 8.1.0
Factory Reset...
Formating User Data section
Factory Reset is successfully performed!
Backup saved as OPPO_F7 (CPH1819)_25-10-2019_10-21-51.dump file
Performed by 1.8.1.1 Software version.
  Reply With Quote
Old 10-25-2019, 06:35   #4986 (permalink)
Freak Poster
 
Join Date: Sep 2014
Location: philippines
Posts: 171
Member: 2256970
Status: Offline
Thanks Meter: 55
0ppo f7 pattern done



Platform: OPPO
Selected model: F7 (CPH1819)
Put the phone into Brom mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint after 3-5 seconds.
Searching for a phone. Please wait...
Operation was canceled
Performed by 1.8.1.1 Software version.

Platform: OPPO
Selected model: F7 (CPH1819)
Put the phone into Brom mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint after 3-5 seconds.
Searching for a phone. Please wait...
No diagnostic ports found!
Operation was failed!
Performed by 1.8.1.1 Software version.

Platform: OPPO
Selected model: F7 (CPH1819)
Put the phone into Brom mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint after 3-5 seconds.
Searching for a phone. Please wait...
Found phone on COM16
Detecting Chip Version...
HW Chip: MT6771: 0788.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: 05
BootLoader Version: FE
Sending auth...
Sending Auth Data...
Target Config: 0x000000E5
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_Octoplus_Oppo_v.1, n.1
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
Mobile Status: SYNC
Mobile Status: brom
Sending BootLoader Info...
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Mobile Status: SYNC
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 59640 Mb
eMMC Flash: .15010044.4836444D.4205BA20.6A75A459
eMMC Flash: Samsung: DH6DMB
Internal RAM size: 256 Kb
External RAM size: 3072 Mb
Reading partition...
Reading info...
Android version: 8.1.0
Factory Reset...
Formating User Data section
Factory Reset is successfully performed!
Backup saved as OPPO_F7 (CPH1819)_25-10-2019_10-21-51.dump file
Performed by 1.8.1.1 Software version.
  Reply With Quote
Old 10-25-2019, 07:59   #4987 (permalink)
No Life Poster
 
djmurod86's Avatar
 
Join Date: Feb 2007
Location: Inside
Posts: 3,236
Member: 455852
Status: Offline
Sonork: 100.1596308
Thanks Meter: 1,554
Donate money to this user
Welcome to Octoplus FRP Tool v.1.8.1.0
Platform: MICROMAX
Selected model: Q402
Please, power phone OFF, press and hold "Vol+" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM178
Connecting...
Mobile Status: SPRD3
Sending preloader...
Mobile Status: Spreadtrum Boot Block version 1.1
Sending mainloader...
Reading info...
Brand: Micromax
Model: Micromax Q402
Device: Q402
Platform: sc8830
Android version: 6.0
Display ID: MMX_Q402_RU_SW_V17_HW_V2.0_20170811
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as Micromax_Micromax Q402_25-10-2019_11-59-12.dump file
Performed by 1.8.1.0 Software version.
  Reply With Quote
Old 10-25-2019, 12:15   #4988 (permalink)
No Life Poster
 
Join Date: Aug 2014
Posts: 642
Member: 2233266
Status: Offline
Thanks Meter: 240
Welcome to Octoplus FRP Tool v.1.8.0.0
Platform: SYMPHONY
Selected model: V98
Please, reconnect battery, press and hold "Vol+" or "Vol-" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM4
Connecting...
Mobile Status: SPRD3
Sending preloader...
Mobile Status: Spreadtrum Boot Block version 1.1
Sending mainloader...
Reading info...
Brand: Symphony
Model: E90
Device: E90
Android version: 8.1.0
Display ID: E90_HW1_V11
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as Symphony_E90_25-10-2019_16-32-58.dump file
Performed by 1.8.0.0 Software version.
  Reply With Quote
Old 10-26-2019, 03:39   #4989 (permalink)
Freak Poster
 
Join Date: Sep 2014
Location: philippines
Posts: 171
Member: 2256970
Status: Offline
Thanks Meter: 55
Welcome to Octoplus FRP Tool v.1.8.1.1
Platform: CHERRY MOBILE
Selected model: FLARE S7 MINI
Please, reconnect battery, press and hold "Vol+" or "Vol-" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM36
Connecting...
Mobile Status: SPRD3
Sending preloader...
Mobile Status: Spreadtrum Boot Block version 1.1
Sending mainloader...
Reading info...
Brand: Cherry_Mobile
Model: Flare_S7_Mini
Device: Flare_S7_Mini
Android version: 8.1.0
Display ID: Cherry_Flare_S7_Mini_V08_09112018
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as Cherry_Mobile_Flare_S7_Mini_26-10-2019_09-58-08.dump file
Performed by 1.8.1.1 Software version.
  Reply With Quote
Old 10-26-2019, 05:08   #4990 (permalink)
No Life Poster
 
Join Date: Aug 2014
Posts: 642
Member: 2233266
Status: Offline
Thanks Meter: 240
Platform: MAXIMUS
Selected model: D7
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM6
Detecting Chip Version...
HW Chip: MT6739: 0699.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 03
Sending auth...
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.21
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
Mobile Status: SYNC
Mobile Status: preloader
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Mobile Status: SYNC
Reading Flash Info...
EMMC rpmb size: 0 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
eMMC Flash: .15010051.37585341.420129F0.C80F91E5
eMMC Flash: Samsung: Q7XSAB
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: Maximus
Model: D7
Device: D7
Android version: 8.1.0
Display ID: GP_MAXIMUS_BD_D7_V08_181103
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as Maximus_D7_26-10-2019_09-47-37.dump file
Performed by 1.8.1.1 Software version.
  Reply With Quote
Old 10-26-2019, 07:44   #4991 (permalink)
No Life Poster
 
djmurod86's Avatar
 
Join Date: Feb 2007
Location: Inside
Posts: 3,236
Member: 455852
Status: Offline
Sonork: 100.1596308
Thanks Meter: 1,554
Donate money to this user
Welcome to Octoplus FRP Tool v.1.8.1.0
Platform: FLY
Selected model: FS458
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM6
Detecting Chip Version...
HW Chip: MT6570: 0633.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.16
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
Mobile Status: SYNC
Mobile Status: preloader
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Mobile Status: SYNC
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7376 Mb
eMMC Flash: .F4012242.6977696E.20100000.0B34C45D
eMMC Flash: Unknown: Biwin
Internal RAM size: 128 Kb
External RAM size: 512 Mb
Reading partition...
Reading info...
Brand: Fly
Model: FS458
Device: Stratus_7
Platform: mt6570
Android version: 6.0
Display ID: SW11_FLY_FS458N_2018_06_22
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as Fly_FS458_26-10-2019_11-38-49.dump file
Performed by 1.8.1.0 Software version.
  Reply With Quote
Old 10-26-2019, 09:18   #4992 (permalink)
Freak Poster
 
GolfGSM's Avatar
 
Join Date: Aug 2019
Location: GuanGzhou-China
Posts: 361
Member: 2924041
Status: Offline
Thanks Meter: 131
Platform: SYMPHONY
Selected model: H60
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM3
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.11
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .15010051.3732534D.4200BC06.9B989205
eMMC Flash: Samsung: Q72SMB
DA ver: 4.2.9C
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 0 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: SYMPHONY
Model: H60
Device: H60
Platform: mt6580
Android version: 5.1
Display ID: H60_XXX_V19
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as SYMPHONY_H60_26-10-2019_14-17-23.dump file
Performed by 1.8.1.1 Software version.
  Reply With Quote
Old 10-26-2019, 09:19   #4993 (permalink)
Freak Poster
 
GolfGSM's Avatar
 
Join Date: Aug 2019
Location: GuanGzhou-China
Posts: 361
Member: 2924041
Status: Offline
Thanks Meter: 131
Platform: SYMPHONY
Selected model: H60
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM3
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.11
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .15010051.3732534D.4200BC06.9B989205
eMMC Flash: Samsung: Q72SMB
DA ver: 4.2.9C
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 0 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: SYMPHONY
Model: H60
Device: H60
Platform: mt6580
Android version: 5.1
Display ID: H60_XXX_V19
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as SYMPHONY_H60_26-10-2019_14-17-23.dump file
Performed by 1.8.1.1 Software version.
  Reply With Quote
Old 10-26-2019, 10:02   #4994 (permalink)
Freak Poster
 
Join Date: Jul 2014
Age: 34
Posts: 267
Member: 2229851
Status: Offline
Thanks Meter: 48
Welcome to Octoplus FRP Tool v.1.8.1.1
Platform: ONEPLUS
Selected model: A6003
Please, power phone OFF, press and hold "Vol+" and "Vol-" buttons and connect USB cable.
Found phone on COM16
Mode: Qualcomm 9008
Connecting...
Reading info...
QC HW ID: 0008B0E10051459B
QC CPU: Snapdragon 845 SDM845
QC SW VER: 00000000
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Chip SN: 09F2E5B3
Checking request..
Reading partition...
Reading info...
Brand: OnePlus
Device: OnePlus6
Android version: 9
Firmware version: 1906251200
Resetting FRP lock..
Searching for signatures...
FRP lock is successfully reseted!
Rebooting phone
Backup saved as OnePlus__26-10-2019_13-01-19.dump file
Performed by 1.8.1.1 Software version.
  Reply With Quote
Old 10-26-2019, 12:06   #4995 (permalink)
No Life Poster
 
djmurod86's Avatar
 
Join Date: Feb 2007
Location: Inside
Posts: 3,236
Member: 455852
Status: Offline
Sonork: 100.1596308
Thanks Meter: 1,554
Donate money to this user
Welcome to Octoplus FRP Tool v.1.8.1.0
Platform: HUAWEI
Selected model: _TEST-MODE
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: ATU-L31
Phone SN: 6VY9Xxxxxxxxxxxxxxxxxxxxxxx
Phone IMEI: 8698xxxxxxxxxxxxxxxxxxx
SW version: ATU-L31 8.0.0.132(C432)
Connecting to server..OK
Authorizing...OK
Resetting FRP lock..
If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
FRP lock is successfully reseted!
Performed by 1.8.1.0 Software version.
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 09:12.



Powered by Searchlight © 2020 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.47135 seconds with 8 queries

SEO by vBSEO