🐙 Post here success Reset FRP story with Octoplus FRP Tool

[djmurod86]

Platform: ZTE
Selected model: A465
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM6
Port name: PreLoader USB VCOM Port (COM6)
Detecting Chip Version...
HW Chip: MT6737: 0335.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.10
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .15010051.3732534D.4200C176.90D4358F
eMMC Flash: Samsung: Q72SMB
DA ver: 4.2.9B
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 0 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: ZTE
Model: ZTE Blade A465
Device: ZTE_Blade_A465
Platform: mt6735m
Android version: 5.1
Display ID: ZTE_Blade_A465_RUCommon_T02
Searching for signatures...
FRP signature not found!
Backup saved as ZTE_ZTE Blade A465_08-02-2020_09-54-16.dump file
Performed by 1.8.5.0 Software version.

[apacheadmiral]

Welcome to Octoplus FRP Tool v.1.8.4.0
Platform: HUAWEI
Selected model: VNS-L31
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: VNS-L31
Phone SN: 4TE7N17608008643
Phone IMEI: 864002036246776
SW version: VNS-L31C02B346
Connecting to server..OK
Authorizing...OK
Resetting FRP lock..
If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
FRP lock is successfully reseted!
Performed by 1.8.4.0 Software version.

[apacheadmiral]

Platform: HUAWEI
Selected model: VNS-L31
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: VNS-L31
Phone SN: 4TE7N17619000656
Phone IMEI: 864002897564267
SW version: VNS-L31C16B136
Connecting to server..OK
Authorizing...OK
Resetting FRP lock..
If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
FRP lock is successfully reseted!
Performed by 1.8.4.0 Software version.

[Yahia_Sb]

Platform: DIGILAND
Selected model: DL1016
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM6
Port name: MediaTek PreLoader USB VCOM (Android) (COM6)
Detecting Chip Version...
HW Chip: MT8167: 8167.0000
HW Version: 8A00.CB00.0001.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.18
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
Mobile Status: SYNC
Mobile Status: preloader
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Mobile Status: SYNC
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 29820 Mb
eMMC Flash: .90014A48.42473461.32A40E2A.8118936F
eMMC Flash: Hynix: HBG4a2
Internal RAM size: 256 Kb
External RAM size: 1536 Mb
Reading partition...
Reading info...
Brand: Digiland
Model: DL1016
Device: mid1016
Android version: 8.1.0
Display ID: O11019 release-keys
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as Digiland_DL1016_08-02-2020_21-25-29.dump file
Performed by 1.8.5.0 Software version.

[djmurod86]

Platform: __GENERAL RESET FRP METHODS
Selected model: MTK GENERAL
Please, reconnect battery, press and hold "Vol+" or "Vol-" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM91
Port name: MediaTek PreLoader USB VCOM (Android) (COM91)
Detecting Chip Version...
HW Chip: MT6737: 0335.0000
HW Version: 8A00.CB00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.10
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .15010046.3732324D.4200BB54.CE569535
eMMC Flash: Samsung: F722MB
DA ver: 4.2.9B
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 0 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: SENSEIT
Model: SENSEIT A200
Device: SENSEIT_A200
Platform: mt6735m
Android version: 6.0
Display ID: SENSEIT_A200_V09_29082016
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as SENSEIT_SENSEIT A200_11-02-2020_10-58-52.dump file
Performed by 1.8.5.0 Software version.

[rufekul]

WALTON Primo S6 infinity

[gamssa_gsm]

Neffos C5 Plus TP7031A successful frp reset by selected model mobiwire kicka5 !

[Unlocker AL]

Wiko View GO w_p130 frp reset ok

[saeedullah_khan]

Welcome to Octoplus FRP Tool v.1.8.6.0
Platform: SAMSUNG
Selected model: SM-J320P
Searching for a phone (waiting for ADB / Fastboot device)...
Please, press "OK" button on the phone to allow USB debugging..
Reading info...
Detected phone model: SM-J320V
Firmware compiled date: Thu May 12 16:09:46 KST 2016
PDA version: J320VVRU2APE1
CSC version: J320VVZW2APE1
SW version: J320VVRU2APE1
Phone SN: R28HA2FSGQZ
Android version: 6.0.1 (MMB29M)
Sales code: VZW
Country: USA
HW platform: msm8916
HW Chip: MSM8916
HW Modem: MSM8916
Security patch level: 2016-05-01
Codename: j3ltevzw
Resetting FRP lock..
FRP lock is successfully reseted!
Goto "Menu->Settings->Backup and reset" and make "Factory data reset"
Performed by 1.8.6.0 Software version.

[saeedullah_khan]

NOKIA 1 PLUS DS TA-1130 FRP ONE CLICK REMOVE DONE

[djmurod86]

Welcome to Octoplus FRP Tool v.1.8.5.0
Platform: XIAOMI
Selected model: REDMI 4A
Put the phone into EDL mode: 
1. Attach testpoint as shown in Help manual; 
2. Connect USB cable; 
3. Release testpoint after 3-5 seconds.
Found phone on COM103
Mode: Qualcomm 9008
Connecting...
Reading info...
QC HW ID: 000560E100000000
QC CPU: Snapdragon 425 MSM8917
QC SW VER: 00000000
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Reading partition...
Reading info...
Brand: Xiaomi
Model: Redmi 4A
Device: rolex
Platform: msm8937
Android version: 7.1.2
Display ID: N2G47H
Firmware version: V9.6.4.0.NCCMIFD
Resetting FRP lock..
Searching for signatures...
FRP lock is successfully reseted!
Rebooting phone
Backup saved as Xiaomi_Redmi 4A_12-02-2020_11-21-21.dump file
Performed by 1.8.5.0 Software version.

[barakath]

Log file "C:\Program Files (x86)\Octoplus\Octoplus_FRP_Tool\LOG\11-02-2020_10-51-08.log" created (2/11/2020 10:51:11 AM).
INFO : 2/11/2020 10:51:25 AM > Welcome to Octoplus FRP Tool v.1.8.5.0
INFO : 2/11/2020 10:52:39 AM > Platform: HUAWEI
INFO : 2/11/2020 10:52:39 AM > Selected model: DRA-LX5
INFO : 2/11/2020 10:52:39 AM > Put the phone in FastBoot Mode:
INFO : 2/11/2020 10:52:39 AM > 1. Remove SD and SIM cards from the phone
INFO : 2/11/2020 10:52:39 AM > 2. Power phone OFF
INFO : 2/11/2020 10:52:39 AM > 3. Press and hold "Vol-" and insert USB cable
INFO : 2/11/2020 10:52:39 AM > 4. Wait until the phone enter in FastBoot Mode
INFO : 2/11/2020 10:52:39 AM > Searching for a phone. Please wait...
INFO : 2/11/2020 10:52:39 AM > Detected phone model: DRA-LX5
INFO : 2/11/2020 10:52:39 AM > Phone SN: VUY9K19515902018
INFO : 2/11/2020 10:52:39 AM > Phone IMEI2: 863517048201080
INFO : 2/11/2020 10:52:39 AM > SW version: DRA-LX5 1.0.0.121(C636)
INFO : 2/11/2020 10:52:39 AM > Connecting to server..
INFO : 2/11/2020 10:52:40 AM > OK
INFO : 2/11/2020 10:52:40 AM > Authorizing...
INFO : 2/11/2020 10:52:50 AM > OK
INFO : 2/11/2020 10:52:50 AM > Resetting FRP lock..
WARN : 2/11/2020 10:53:30 AM > If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
WARN : 2/11/2020 10:53:30 AM > FRP lock is successfully reseted!
INFO : 2/11/2020 10:53:31 AM > Performed by 1.8.5.0 Software version.


BROTHERS FIRST OF ALL YOU NEED TO PUT THE MOBILE IN FASTBOOT MODE MANUALLY BY VOL UP AND POWER ON,THEN SELECT FASTBOOT MODE.

[barakath]

INFO : 2/10/2020 12:21:10 PM > Platform: HUAWEI
INFO : 2/10/2020 12:21:10 PM > Selected model: RNE-L22
INFO : 2/10/2020 12:21:10 PM > Put the phone in FastBoot Mode:
INFO : 2/10/2020 12:21:10 PM > 1. Remove SD and SIM cards from the phone
INFO : 2/10/2020 12:21:10 PM > 2. Power phone OFF
INFO : 2/10/2020 12:21:10 PM > 3. Press and hold "Vol-" and insert USB cable
INFO : 2/10/2020 12:21:10 PM > 4. Wait until the phone enter in FastBoot Mode
INFO : 2/10/2020 12:21:10 PM > Searching for a phone. Please wait...
INFO : 2/10/2020 12:21:10 PM > Detected phone model: RNE-L22
INFO : 2/10/2020 12:21:10 PM > Phone SN: 8UEDU17C30007285
INFO : 2/10/2020 12:21:10 PM > Phone IMEI: 868009036838805
INFO : 2/10/2020 12:21:10 PM > Phone IMEI2: 868009036858811
INFO : 2/10/2020 12:21:10 PM > SW version: RNE-L22 8.0.0.349(C636)
INFO : 2/10/2020 12:21:10 PM > Connecting to server..
INFO : 2/10/2020 12:21:10 PM > OK
INFO : 2/10/2020 12:21:10 PM > Authorizing...
INFO : 2/10/2020 12:21:14 PM > OK
INFO : 2/10/2020 12:21:14 PM > Resetting FRP lock..
WARN : 2/10/2020 12:21:30 PM > If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
ERROR : 2/10/2020 12:21:30 PM > Operation was failed!
INFO : 2/10/2020 12:21:31 PM > Performed by 1.8.5.0 Software version.

INFO : 2/10/2020 5:23:33 PM > Welcome to Octoplus FRP Tool v.1.8.5.0
INFO : 2/10/2020 5:23:55 PM > Platform: HUAWEI
INFO : 2/10/2020 5:23:55 PM > Selected model: RNE-L22
INFO : 2/10/2020 5:23:55 PM > Put the phone in FastBoot Mode:
INFO : 2/10/2020 5:23:55 PM > 1. Remove SD and SIM cards from the phone
INFO : 2/10/2020 5:23:55 PM > 2. Power phone OFF
INFO : 2/10/2020 5:23:55 PM > 3. Press and hold "Vol-" and insert USB cable
INFO : 2/10/2020 5:23:55 PM > 4. Wait until the phone enter in FastBoot Mode
INFO : 2/10/2020 5:23:55 PM > Searching for a phone. Please wait...
INFO : 2/10/2020 5:23:55 PM > Detected phone model: RNE-L22
INFO : 2/10/2020 5:23:55 PM > Phone SN: 8UEDU17C30007285
INFO : 2/10/2020 5:23:55 PM > Phone IMEI: 868009036838805
INFO : 2/10/2020 5:23:55 PM > Phone IMEI2: 868009036858811
INFO : 2/10/2020 5:23:55 PM > SW version: RNE-L22 8.0.0.321(C636)
INFO : 2/10/2020 5:23:55 PM > Connecting to server..
INFO : 2/10/2020 5:23:55 PM > OK
INFO : 2/10/2020 5:23:55 PM > Authorizing...
INFO : 2/10/2020 5:23:58 PM > OK
INFO : 2/10/2020 5:23:58 PM > Resetting FRP lock..
WARN : 2/10/2020 5:24:01 PM > If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
WARN : 2/10/2020 5:24:01 PM > FRP lock is successfully reseted!
INFO : 2/10/2020 5:24:01 PM > Performed by 1.8.5.0 Software version.

[nobichanmaruf]

[nobichanmaruf]