GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Octopus/Octoplus > Octoplus FRP Tool

Reply
 
LinkBack Thread Tools Display Modes
Old 02-17-2020, 10:14   #5731 (permalink)
No Life Poster
 
dragosgsm's Avatar
 
Join Date: May 2005
Location: Bacau
Posts: 3,092
Member: 148032
Status: Offline
Thanks Meter: 387
Wink Huawei p20lite succesfuly unlocked by TP


Welcome to Octoplus FRP Tool v.1.8.6.0
Platform: HUAWEI
Selected model: ANE-LX1
Put the phone into Factory mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint.
Searching for a phone. Please wait...
Found phone on COM1600
Checking resource files...
Searching for a phone. Please wait...
Found phone on COM1600
Setting options...
Writing BOOT...
Switching to FastBoot mode...
Searching for a phone. Please wait...
Detected phone model: ANE-LX1
Phone SN: 9WV4C1892xxxxxxx
Phone IMEI: 86274xxxxxxxxx
Phone IMEI2: 862742xxxxxxxxxxxxx
SW version: ANE-LX1 9.1.0.228(C432E6R1P7)
FRP lock is successfully reseted!
Performed by 1.8.6.0 Software version.

  Reply With Quote
Old 02-17-2020, 14:40   #5732 (permalink)
Junior Member
 
Join Date: Sep 2019
Location: Côte d'Ivoire
Posts: 32
Member: 2930238
Status: Offline
Thanks Meter: 5
HUAWEI VNS-L31 ( P9 lite )FRP SUCCESFULLY REMOVED

Welcome to Octoplus FRP Tool v.1.8.5.0
Platform: HUAWEI
Selected model: VNS-L31
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: VNS-L31
Phone SN: FUH7N16B04004276
Phone IMEI: 8630660xxxxxxxx
Phone IMEI: 8630660xxxxxxxx
SW version: VNS-L31C432B370
Connecting to server..OK
Authorizing...OK
Resetting FRP lock..
If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
FRP lock is successfully reseted!
Performed by 1.8.5.0 Software version.
  Reply With Quote
Old 02-18-2020, 07:16   #5733 (permalink)
Freak Poster
 
Join Date: Apr 2008
Location: South Africa
Posts: 437
Member: 746586
Status: Offline
Thanks Meter: 24
Welcome to Octoplus FRP Tool v.1.8.4.0
Platform: XIAOMI
Selected model: REDMI 4A
Put the phone into EDL mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint after 3-5 seconds.
Found phone on COM278
Mode: Qualcomm 9008
Connecting...
Reading info...
QC HW ID: 000560E100000000
QC CPU: Snapdragon 425 MSM8917
QC SW VER: 00000000
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Reading partition...
Reading info...
Brand: Xiaomi
Model: Redmi 4A
Device: rolex
Platform: msm8937
Android version: 7.1.2
Display ID: N2G47H
Firmware version: V10.2.3.0.NCCMIXM
Resetting FRP lock..
Searching for signatures...
FRP lock is successfully reseted!
Rebooting phone
Backup saved as Xiaomi_Redmi 4A_18-02-2020_09-13-52.dump file
Performed by 1.8.4.0 Software version.
  Reply With Quote
Old 02-18-2020, 15:05   #5734 (permalink)
Junior Member
 
Join Date: Sep 2019
Location: Côte d'Ivoire
Posts: 32
Member: 2930238
Status: Offline
Thanks Meter: 5
HUAWEI DUB-LX1 ( Huawei Y9 2019 ) FRP SUCCESSFULLY REMOVED VIA TP ( edl mode )


Welcome to Octoplus FRP Tool v.1.8.5.0
Platform: HUAWEI
Selected model: DUB-LX1
Put the phone into EDL mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint after 3-5 seconds.
Searching for a phone. Please wait...
Connecting...
Reading info...
QC HW ID: 0009A0E100150065
QC CPU: Snapdragon 450 SDM450
QC SW VER: 00000000
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Checking request..
Reading partition...
Reading info...
Android version: 8.1.0
Display ID: System 8.2.0.036(06JW)
Resetting FRP lock..
Searching for signatures...
Rebooting phone
Backup saved as HUAWEI_DUB-LX1_18-02-2020_14-45-45.dump file
FRP lock is successfully reseted!
Performed by 1.8.5.0 Software version.
  Reply With Quote
Old 02-18-2020, 15:05   #5735 (permalink)
Junior Member
 
Join Date: Sep 2019
Location: Côte d'Ivoire
Posts: 32
Member: 2930238
Status: Offline
Thanks Meter: 5
Infinix x559c frp removed successfully

Last edited by m_expert; 02-18-2020 at 15:12.
  Reply With Quote
Old 02-19-2020, 10:16   #5736 (permalink)
No Life Poster
 
Join Date: Dec 2009
Location: PAKISTAN
Posts: 1,473
Member: 1185918
Status: Offline
Sonork: 100.1617322
Thanks Meter: 66
Nokia one Plus TA-1111 singel click FRP Remove

Welcome to Octoplus FRP Tool v.1.8.6.0
Platform: HUAWEI
Selected model: MRD-LX1F
Put the phone into Brom mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint after 3-5 seconds.
Searching for a phone. Please wait...
Operation was canceled
Performed by 1.8.6.0 Software version.

Platform: HUAWEI
Selected model: MRD-LX1F
Put the phone into Brom mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint after 3-5 seconds.
Searching for a phone. Please wait...
Operation was canceled
Performed by 1.8.6.0 Software version.

Platform: NOKIA
Selected model: TA-1111
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM144
Port name: MediaTek PreLoader USB VCOM (Android) (COM144)
Detecting Chip Version...
HW Chip: MT6739: 0699.0000
HW Version: 8A00.CB00.0002.0000
Connecting...
Brom Version: FF
BootLoader Version: 03
Sending auth...
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-07-20.12:38_446360+446801, n.21
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
Mobile Status: SYNC
Mobile Status: preloader
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Mobile Status: SYNC
Reading Flash Info...
EMMC rpmb size: 0 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
eMMC Flash: .15010046.4E36324D.4203F555.E4CD86C7
eMMC Flash: Samsung: FN62MB
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: alps
Model: ANT
Device: ANT
Android version: 9
Display ID: 00WW_0_980
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as alps_ANT_18-02-2020_16-31-32.dump file
Performed by 1.8.6.0 Software version.
  Reply With Quote
Old 02-19-2020, 10:35   #5737 (permalink)
Freak Poster
 
Join Date: Apr 2008
Location: South Africa
Posts: 437
Member: 746586
Status: Offline
Thanks Meter: 24
Welcome to Octoplus FRP Tool v.1.8.6.0
Platform: HUAWEI
Selected model: ANE-LX1
Put the phone into Factory mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint.
Searching for a phone. Please wait...
Found phone on COM21
Checking resource files...
Searching for a phone. Please wait...
Found phone on COM21
Setting options...
Writing BOOT...
Switching to FastBoot mode...
Searching for a phone. Please wait...
Detected phone model: ANE-LX1
Phone SN: 89UDU18723005472
Phone IMEI: 863441042381022
Phone IMEI2: 000000000000000
SW version: ANE-LX1 8.0.0.145(C432)
FRP lock is successfully reseted!
Performed by 1.8.6.0 Software version.

Last edited by apacheadmiral; 02-19-2020 at 10:36. Reason: ERROR
  Reply With Quote
Old 02-19-2020, 10:38   #5738 (permalink)
Freak Poster
 
Join Date: Apr 2008
Location: South Africa
Posts: 437
Member: 746586
Status: Offline
Thanks Meter: 24
Welcome to Octoplus FRP Tool v.1.8.6.0
Platform: HUAWEI
Selected model: ANE-LX2
Put the phone into Factory mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint.
Searching for a phone. Please wait...
Found phone on COM21
Checking resource files...
Searching for a phone. Please wait...
Found phone on COM21
Setting options...
Writing BOOT...
Switching to FastBoot mode...
Searching for a phone. Please wait...
Detected phone model: ANE-LX2
Phone SN: WCY4C18C25003275
Phone IMEI: 861546041656463
Phone IMEI2: 861546041691098
SW version: ANE-LX2 8.0.0.147(ZAFC185)
FRP lock is successfully reseted!
Performed by 1.8.6.0 Software version.
  Reply With Quote
Old 02-19-2020, 10:40   #5739 (permalink)
Freak Poster
 
Join Date: Apr 2008
Location: South Africa
Posts: 437
Member: 746586
Status: Offline
Thanks Meter: 24
Welcome to Octoplus FRP Tool v.1.8.6.0
Platform: HUAWEI
Selected model: ANE-LX2
Put the phone into Factory mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint.
Searching for a phone. Please wait...
Found phone on COM21
Checking resource files...
Searching for a phone. Please wait...
Found phone on COM21
Setting options...
Writing BOOT...
Switching to FastBoot mode...
Searching for a phone. Please wait...
Detected phone model: ANE-LX2
Phone SN: WCY4C18C25003275
Phone IMEI: 861546041656463
Phone IMEI2: 861546041691098
SW version: ANE-LX2 8.0.0.147(ZAFC185)
FRP lock is successfully reseted!
Performed by 1.8.6.0 Software version.
  Reply With Quote
Old 02-19-2020, 11:56   #5740 (permalink)
No Life Poster
 
genci titi 2002's Avatar
 
Join Date: Oct 2005
Location: SERVIS CELULAR TITI 2002 PG/AL
Posts: 3,510
Member: 193804
Status: Offline
Sonork: 100.1659400
Thanks Meter: 1,139
Wink SM-G928F FRP lock is successfully reseted!

Welcome to Octoplus FRP Tool v.1.8.6.0
Platform: SAMSUNG
Selected model: SM-G928F
To put SM-G928F into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Searching for a phone. Please wait...
Phone found.
Initializing..
PIT was read successfully.
Searching for UART interface.. COM4
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Resetting FRP lock..
FRP lock is successfully reseted!
Wait 3-4 min then goto "Menu -> Settings -> Backup and reset" and make "Factory data reset"
Performed by 1.8.6.0 Software version.
  Reply With Quote
Old 02-19-2020, 16:04   #5741 (permalink)
Freak Poster
 
Join Date: Oct 2011
Location: Almoradi (ALICANTE) . SPAIN
Posts: 486
Member: 1677266
Status: Offline
Thanks Meter: 85
ZTE Blade A5 2020 FRP lock is successfully reseted!

Platform: ZTE
Selected model: A5
Please, reconnect battery, press and hold "Vol+" or "Vol-" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM135
Connecting...
Mobile Status: SPRD3
Sending preloader...
Mobile Status: Spreadtrum Boot Block version 1.1
Sending mainloader...
Reading info...
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as ZTE_A5_19-02-2020_16-57-57.dump file
Performed by 1.8.6.0 Software version.
  Reply With Quote
Old 02-20-2020, 13:08   #5742 (permalink)
Junior Member
 
Join Date: Sep 2019
Location: Côte d'Ivoire
Posts: 32
Member: 2930238
Status: Offline
Thanks Meter: 5
Orange Marphee FRP SUCCESFULLY REMOVED


Platform: ORANGE
Selected model: MAHPEE
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM22
Port name: MediaTek PreLoader USB VCOM (Android) (COM22)
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2017-07-19.22:57, n.11
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .70010045.45344941.3401269D.D0D92581
eMMC Flash: Pretec: EE4IA4
DA ver: 4.2.9C
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 0 Mb
EMMC boot1 size: 2 Mb
EMMC boot2 size: 2 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 3616 Mb
Internal RAM size: 128 Kb
External RAM size: 512 Mb
Reading partition...
Reading info...
Brand: Orange
Model: Orange Mahpee
Device: Mahpee
Platform: mt6580
Android version: 8.1.0
Display ID: O11019 release-keys
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!

Backup saved as Orange_Orange Mahpee_20-02-2020_12-57-10.dump file
Performed by 1.8.5.0 Software version.
  Reply With Quote
Old 02-20-2020, 13:08   #5743 (permalink)
Junior Member
 
Join Date: Sep 2019
Location: Côte d'Ivoire
Posts: 32
Member: 2930238
Status: Offline
Thanks Meter: 5
Orange Marphee FRP SUCCESFULLY REMOVED


Platform: ORANGE
Selected model: MAHPEE
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM22
Port name: MediaTek PreLoader USB VCOM (Android) (COM22)
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2017-07-19.22:57, n.11
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .70010045.45344941.3401269D.D0D92581
eMMC Flash: Pretec: EE4IA4
DA ver: 4.2.9C
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 0 Mb
EMMC boot1 size: 2 Mb
EMMC boot2 size: 2 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 3616 Mb
Internal RAM size: 128 Kb
External RAM size: 512 Mb
Reading partition...
Reading info...
Brand: Orange
Model: Orange Mahpee
Device: Mahpee
Platform: mt6580
Android version: 8.1.0
Display ID: O11019 release-keys
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!

Backup saved as Orange_Orange Mahpee_20-02-2020_12-57-10.dump file
Performed by 1.8.5.0 Software version.
  Reply With Quote
Old 02-20-2020, 19:51   #5744 (permalink)
No Life Poster
 
ribbentrop's Avatar
 
Join Date: Sep 2003
Location: Ukraine
Age: 47
Posts: 4,247
Member: 40400
Status: Offline
Thanks Meter: 1,101
ZTE Blade A522 FRP reset

Code:
Platform: ZTE
Selected model: A522
Searching for a phone. Please wait...
Found phone on COM33
Mode: Diagnostic
Firmware released date: Oct 25 2018
Firmware released time: 04:19:35
Firmware compiled date: Jun 12 2017
Firmware compiled time: 06:00:00
SW version: MPSS.JO.3.0-00269-8937_GENNS_PACK-1.99670.1.103073.1
Rebooting to Qualcomm 9008 mode...
Found phone on COM10
Mode: Qualcomm 9008
Connecting...
Reading info...
QC Block ID: 4D67EB8D
QC HW ID: 000560E100040000
QC CPU: Snapdragon 425 MSM8917
QC HASH: 4BCCB15D8FFDBB6000FFA164E1DC0CAC3F174A08063C1B65B7D4B5D1DF58D665
QC SW VER: 00000000
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Reading partition...
Reading info...
Brand: ZTE
Model: ZTE Blade A522
Device: P817E53
Platform: msm8937
Android version: 7.1.1
Display ID: GEN_CIS_A522_V1.0
Firmware version: 20181026.133929
Resetting FRP lock..
Searching for signatures...
FRP lock is successfully reseted!
Rebooting phone
Backup saved as ZTE_ZTE Blade A522_20-02-2020_21-49-35.dump file
Performed by 1.8.6.0 Software version.
  Reply With Quote
Old 02-21-2020, 09:32   #5745 (permalink)
No Life Poster
 
genci titi 2002's Avatar
 
Join Date: Oct 2005
Location: SERVIS CELULAR TITI 2002 PG/AL
Posts: 3,510
Member: 193804
Status: Offline
Sonork: 100.1659400
Thanks Meter: 1,139
Wink DOOGEE X50 FRP lock is successfully reseted!

Welcome to Octoplus FRP Tool v.1.8.6.0
Platform: DOOGEE
Selected model: X50
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM13
Port name: MediaTek PreLoader USB VCOM (Android) (COM13)
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.11
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .45010044.47343030.3801C5F3.410084AF
eMMC Flash: Sandisk: DG4008
DA ver: 4.2.9C
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7457 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: DOOGEE
Model: X50
Device: X50
Android version: 8.1.0
Display ID: DOOGEE-X50-Android go-20180710
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as DOOGEE_X50_21-02-2020_10-19-38.dump file
Performed by 1.8.6.0 Software versi
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 20:21.



Powered by Searchlight © 2020 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.24617 seconds with 8 queries

SEO by vBSEO