How to Flashing Huawei Board Software - GSM-Forum

Easy Support · 06-08-2018, 20:33

Huawei board software Repair for bricked / FRP / Erase Huawei

Download IMAGE Software Huawei board software
Download Tools Software & Drive

Driver Installation

Double-click the Driver Setup file to install the driver. Installation steps are not displayed because the installation is unattended. When the automatic installation is complete
View the HUAWEI USB COM 1.0 of the forcible loading driver under the Device Manager

Click the USB Map, after the port mapping program is started, configure the XML file (this file is an XML file mapped to the target burned version), and then connect the phone to the computer using the loading fixture or by short-circuiting the test point. The port switches from HUAWEI USB COM 1.0 to the Android Debug Bridge (ADB) port. the interface displayed after the mapping is complete. Note that power supply to the PCBA needs to be disconnected during forcible port mapping. To clear mapped ports, click Clear UsbMap.

To map multiple phones at the same time, replace the USB port that connects to the computer, and map the new ports using the same method as described previously

After the mapping is complete, click Done to exit the mapping window.Open IDTML01.exe
Press Icon Setting

to switch to the main window of the tool

Enter Password huawei

Browse DLL Model and select Model.dll

Browse Config File and select XML From Board File

Click

to run IDT too

Software Downloading Success

Precautions

After being mapped, a port can be used directly and does not need to be mapped again.
The path of the software to be loaded cannot be too deep. Otherwise, the software cannot be properly loaded.
Do not touch the USB cable during the loading process.
Loading will erase the radio frequency (RF) NV information from a phone. Use with caution. After the loading is complete, RF calibration and comprehensive tests need to be performed on the phone.
In some computers running the Windows 7, the software loading may fail at 40% of the progress because the ADB port is occupied. If this occurs, use the appended tool to release the ADB port, and load the software again.

=================
Dont Forget To Use Only
Thanks Button

=================

Best Regards:
Easy-Firmware Team

Easy Firmware First Source Firmware in the world

Download Free Stock Rom for all models Collection Of Stock ROM's Free For All

Samsung Firmware - HTC Firmware - Huawei Firmware -Zte Firmware - Gionee - OnePlus - InFocus - Panasonic - Sony - Coolpad - LG - Karbonn - Asus- Infinix - Intex - Lava - Reliance - Itel - Google - Jivi - Yu - Blackberry - Smartron - iVooMi - Swipe - Meizu - LeEco - Motorola - Lyf - I Kall - Firmware Samsung - Update Samsung - Oppo - Doogee - VOTO - XOLO - Trio - Videocon - IBall - AGM - Lemon - Umidigi - Vernee - Ulefone - Billion - Comio - Gfive - Spice - Celkon - Maxx - Nubia - Zen - Microsoft - VOX - Alcatel - Good One - Ziox - Reach - Sansui - M-Tech - Turing - BLU - Oukitel - Lephone - Philips - Black Bear - Datawind - Bluboo - Forme - Dami - Razer - Yxtel - Hi-Tech - Rom - Update
And More

essojay · 06-13-2018, 23:50

can this fix bricked Huawei Mate 10 pro thats on Huawei Usb Com 1.0

tried HDETOOL and phoenix, not working.

please let me know so i make decision,

thanks

bR

orhan5 · 12-02-2018, 22:17

If u don't found board software
U will not solve this problem
Don't lose ur time to find solution

Neo Cambell XXX · 12-19-2018, 20:48

hello, I have VTR-L09,
where are find the file ?

orhan5 · 12-19-2018, 22:14

Quote:

Originally Posted by essojay

can this fix bricked Huawei Mate 10 pro thats on Huawei Usb Com 1.0

tried HDETOOL and phoenix, not working.

please let me know so i make decision,

thanks

bR

I find it but it's paid
https://easy-firmware.com/index.php?...older&id=33465

Sent from my BLA-L29 using Tapatalk

Neo Cambell XXX · 12-29-2018, 16:44

not funcion for - VTR-L09

CHAUDHRAY ARSHAD · 01-16-2019, 14:37

not working p20 pro clt l09

06-08-2018, 20:33	#1 (permalink)
Easy Support Freak Poster Join Date: Dec 2017 Posts: 439 Member: 2785090 Status: Offline Thanks Meter: 349	How to Flashing Huawei Board Software Huawei board software Repair for bricked / FRP / Erase Huawei Download IMAGE Software Huawei board software Download Tools Software & Drive Driver Installation Double-click the Driver Setup file to install the driver. Installation steps are not displayed because the installation is unattended. When the automatic installation is complete View the HUAWEI USB COM 1.0 of the forcible loading driver under the Device Manager Click the USB Map, after the port mapping program is started, configure the XML file (this file is an XML file mapped to the target burned version), and then connect the phone to the computer using the loading fixture or by short-circuiting the test point. The port switches from HUAWEI USB COM 1.0 to the Android Debug Bridge (ADB) port. the interface displayed after the mapping is complete. Note that power supply to the PCBA needs to be disconnected during forcible port mapping. To clear mapped ports, click Clear UsbMap. To map multiple phones at the same time, replace the USB port that connects to the computer, and map the new ports using the same method as described previously After the mapping is complete, click Done to exit the mapping window.Open IDTML01.exe Press Icon Setting to switch to the main window of the tool Enter Password huawei Browse DLL Model and select Model.dll Browse Config File and select XML From Board File Click to run IDT too Software Downloading Success Precautions After being mapped, a port can be used directly and does not need to be mapped again. The path of the software to be loaded cannot be too deep. Otherwise, the software cannot be properly loaded. Do not touch the USB cable during the loading process. Loading will erase the radio frequency (RF) NV information from a phone. Use with caution. After the loading is complete, RF calibration and comprehensive tests need to be performed on the phone. In some computers running the Windows 7, the software loading may fail at 40% of the progress because the ADB port is occupied. If this occurs, use the appended tool to release the ADB port, and load the software again. ================= Dont Forget To Use Only Thanks Button ================= Best Regards: Easy-Firmware Team Easy Firmware First Source Firmware in the world Download Free Stock Rom for all models Collection Of Stock ROM's Free For All Samsung Firmware - HTC Firmware - Huawei Firmware -Zte Firmware - Gionee - OnePlus - InFocus - Panasonic - Sony - Coolpad - LG - Karbonn - Asus- Infinix - Intex - Lava - Reliance - Itel - Google - Jivi - Yu - Blackberry - Smartron - iVooMi - Swipe - Meizu - LeEco - Motorola - Lyf - I Kall - Firmware Samsung - Update Samsung - Oppo - Doogee - VOTO - XOLO - Trio - Videocon - IBall - AGM - Lemon - Umidigi - Vernee - Ulefone - Billion - Comio - Gfive - Spice - Celkon - Maxx - Nubia - Zen - Microsoft - VOX - Alcatel - Good One - Ziox - Reach - Sansui - M-Tech - Turing - BLU - Oukitel - Lephone - Philips - Black Bear - Datawind - Bluboo - Forme - Dami - Razer - Yxtel - Hi-Tech - Rom - Update And More Last edited by Easy Support; 06-08-2018 at 21:09.

06-13-2018, 23:50	#2 (permalink)
essojay No Life Poster Join Date: Jul 2002 Location: uk Posts: 3,601 Member: 13808 Status: Offline Thanks Meter: 163	can this fix bricked Huawei Mate 10 pro thats on Huawei Usb Com 1.0 tried HDETOOL and phoenix, not working. please let me know so i make decision, thanks bR

12-02-2018, 22:17	#3 (permalink)
orhan5 No Life Poster Join Date: Sep 2016 Location: IN THIS WORLD Age: 33 Posts: 1,174 Member: 2621892 Status: Offline Sonork: 1677742 Thanks Meter: 456	If u don't found board software U will not solve this problem Don't lose ur time to find solution

12-19-2018, 20:48	#4 (permalink)
Neo Cambell XXX Crazy Poster Join Date: Jan 2006 Posts: 52 Member: 218505 Status: Offline Thanks Meter: 4	hello, I have VTR-L09, where are find the file ?

12-29-2018, 16:44	#6 (permalink)
Neo Cambell XXX Crazy Poster Join Date: Jan 2006 Posts: 52 Member: 218505 Status: Offline Thanks Meter: 4	not funcion for - VTR-L09

01-16-2019, 14:37	#7 (permalink)
CHAUDHRAY ARSHAD No Life Poster Join Date: Aug 2006 Location: gsmchaudhrayarshad Age: 43 Posts: 7,004 Member: 328688 Status: Online Thanks Meter: 2,282	not working p20 pro clt l09