COR-L29‬ Connect is not supported for this device [Answered]

[Prototip4ik]

build number 9.1.0.330 (С10E1R1P9PATCH01 GPU TURBO)
EMUI 9.1.0
ANDROID 9
ANDROID PROTECTIVE PATCH JULY 5, 2019

Welcome to Octoplus Huawei Software v.‪1.1.1‬

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
1: COM3 USB Serial Port
2: COM19 HUAWEI Mobile Connect - Fake Acm Interface
3: COM20 Android Adapter PCUI
4: COM1 Последовательный порт
5: COM21 DBAdapter Reserved Interface
6: COM2 Последовательный порт

2019-09-04 07:51:29 GMT -------------------------------------------------
Starting Connect
Selected phone model: ‪COR-L29‬

Connect is not supported for this device.
Performed by ‪1.1.1‬ Software version.

2019-09-04 07:54:13 GMT -------------------------------------------------
Starting Auto detect

Detected ‪HiSilicon Android Device‬ at ‪COM20‬
Warning: Can't get serial number.
Warning: Can't get device model.
Warning: Can't get IMEI/MAC info.
Removing security protection...
Connecting to server...
Device firmware is currently not supported

Auto detect failed.
Performed by ‪1.1.1‬ Software version.

[Octopus box]

Hello.

What exactly You are trying to do?

[Prototip4ik]

Originally Posted by Octopus box

Hello.

What exactly You are trying to do?

Programmatically disable the phone. So the client wished. Anyway, it’s just that the software supports this model, but I can’t connect

[Octopus box]

Programmatically disable the phone

What do You mean exctly?

[Prototip4ik]

Originally Posted by Octopus box

What do You mean exctly?

You need to programmatically kill the smartphone. The question is different ... Why does the model declared in the software not connect? Need to lower the firmware?

[Octopus box]

For this device supported only Write Firmware / Reset FRP ADB / Reset FRP TP operation, Note: You don't need to perform Connect operation!!!