JKM-LX1‬ frp not don [Answered]

[alimobile279]

Welcome to Octoplus Huawei Software v.‪1.1.0‬

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
1: COM4 USB Serial Port
2: COM1 Virtual Serial Port 7 (Eltima Software)
3: COM2 Virtual Serial Port 7 (Eltima Software)
4: COM3 HDA CX11270 Soft Modem

2019-06-16 10:40:34 GMT -------------------------------------------------
Starting Reset FRP (Fastboot Mode)
Searching connected Fastboot devices...
Warning: Reading serial number failed

Device Model: ‪JKM-LX1‬
System: ‪JKM-LX1 8.2.0.155(C185)

[Octopus box]

Hello.

Please, download and install latest test Software version from Support Area and repeat opperation again