mi max 3 unlock bootloader GUIDE

[FullFlash™]

how?





after flash step1 then flash again step?


need guide thanks

[FullFlash™]

upload pics to internet

[Franky_36]

Originally Posted by FullFlash™

upload pics to internet

good
Flash step 1, it will restart the xiaomi, we reconnect it in edl mode.
Flash step 2, will restart the xiaomi, if the xiaomi stays in the logo, recovery mode and wipe, then the xiaomi puts it in fastboot mode, well installed drivers, you open the qualcomm module of hydra and in connection you select fastboot mode and tildas xiaomi unlock bootloader, if everything went correctly when you restart the xiaomi it will appear unlocked, I hope it has served you.

[Franky_36]

Good again, not in accordance with the explanation that I have given you, in the hydra support, there is a pdf that explains how to unlock the bootloader, the system is the same for all xiaomi, but that with its correct or corresponding files according to the xiaomi model, but the procedure is the same.



In the event that the flash of step 1 and step 2 does not work, I put a screenshot, you download this firmware from the support and flash, you make firmware downgrade and there you will not have problems to unlock the bootloader, anything post or pm, thank you very much.

[FullFlash™]

good answer but if u flash this nitrogen_global_images_V9.6.6.0.OEDMIFD_20180726.0 000.00_8.1_global_586a61553b

after flash only qualcomm phone no power

[Franky_36]

Originally Posted by FullFlash™

good answer but if u flash this nitrogen_global_images_V9.6.6.0.OEDMIFD_20180726.0 000.00_8.1_global_586a61553b

after flash only qualcomm phone no power

Good, do not be scared that it is normal, follow the instructions in the screenshot, any questions answer this post or pm, thank you very much.

[FullFlash™]

AFTER FLASH 1 AND 2
UNLOCK BOOT VIA EDL ERROR

THEN FLASH USING

1.......nitrogen_global_images_V9.6.6.0.OEDMIFD_20 180726.0000.00_8.1_global_586a61553b NO POWER

2.....nitrogen_global_images_V10.0.1.0.OEDMIFH_201 81012.0000.00_8.1_global_159a03b105 NO POWER

3......nitrogen_global_images_V10.3.1.0.PEDMIXM_20 190402.0000.00_9.0_global_21e552caab PHONE WORKING NORMAL

WHAT HAPPEN.

[FullFlash™]

AFTER FLASH 1 AND 2
UNLOCK BOOT VIA EDL ERROR

only edl mode no fastboot

any solution thanks

[Deni's]

Originally Posted by FullFlash™

AFTER FLASH 1 AND 2
UNLOCK BOOT VIA EDL ERROR

THEN FLASH USING

1.......nitrogen_global_images_V9.6.6.0.OEDMIFD_20 180726.0000.00_8.1_global_586a61553b NO POWER

2.....nitrogen_global_images_V10.0.1.0.OEDMIFH_201 81012.0000.00_8.1_global_159a03b105 NO POWER

3......nitrogen_global_images_V10.3.1.0.PEDMIXM_20 190402.0000.00_9.0_global_21e552caab PHONE WORKING NORMAL

WHAT HAPPEN.

strange problem.......

[Franky_36]

Originally Posted by FullFlash™

AFTER FLASH 1 AND 2
UNLOCK BOOT VIA EDL ERROR

THEN FLASH USING

1.......nitrogen_global_images_V9.6.6.0.OEDMIFD_20 180726.0000.00_8.1_global_586a61553b NO POWER

2.....nitrogen_global_images_V10.0.1.0.OEDMIFH_201 81012.0000.00_8.1_global_159a03b105 NO POWER

3......nitrogen_global_images_V10.3.1.0.PEDMIXM_20 190402.0000.00_9.0_global_21e552caab PHONE WORKING NORMAL

WHAT HAPPEN.

Good again, either way unlocks the bootloader, I explain:
1. Flash step1 and then step 2, we put the xiaomi in fastboot mode and in the qualcomm module in the connection section we put it in fastboot mode, it only remains to put it to the miui version we want.
2. flash firmware miui 9.6 once flashed, the xiaomi will go black with the screen, disconnect the battery, reconnect it and put the xiaomi in fastboot mode, in the device manager there we will see the fastboot driver and check that the Xiaomi is in fastboot, now we open the module hydra qualcomm, connection box and put it in fastboot mode and we give it to the execute box, and we will only have to flash it with the firmware of the miui version that we want and we will have the bootloader unlocked.

Important: If the phone stays in the logo or does not start, we access the recovery mode and do wipe and the xiaomi should start normally.

[FullFlash™]

after flash 1 and 2
phone only edl no fastboot
unlock via edl error

try flash almost 3 files from support after phone qualcomm mode only
only this file nitrogen_global_images_V10.3.1.0.PEDMIXM_20 190402.0000.00_9.0_global_21e552caab after flash phone on normal mode..

[Franky_36]

Originally Posted by FullFlash™

after flash 1 and 2
phone only edl no fastboot
unlock via edl error

try flash almost 3 files from support after phone qualcomm mode only
only this file nitrogen_global_images_V10.3.1.0.PEDMIXM_20 190402.0000.00_9.0_global_21e552caab after flash phone on normal mode..

Good follow the instructions I wrote in the previous post.
If the flash step1 and step 2 fail, degrade the xiaomi with firmware 1 ....... nitrogen_global_images_V9.6.6.0.OEDMIFD_20 180726.0000.00_8.1_global_586a61553b and follow the process that I have written to you please.
2. the xiaomi will go black with the screen, disconnect the battery, reconnect it and put the xiaomi in fastboot mode, in the device manager there we will see the fastboot driver and check that the Xiaomi is in fastboot, now we open the module hydra qualcomm, connection box and put it in fastboot mode and we give it to the execute box, and we will only have to flash it with the firmware of the miui version that we want and we will have the bootloader unlocked.

Important: If the phone stays in the logo or does not start, we access the recovery mode and do wipe and the xiaomi should start normally.

[FullFlash™]

read again phone no fastboot after 1 or step 2 only edl mode

how it works?