be4 imei crypted.. cannt unlock - GSM-Forum

s4sajii · 03-15-2003, 06:08

i have tried evey s.w. but cannt unlock it.. the mcom 5.5 lite shows the iemi crypted....it unlock it but phone is still locked.. i have tried emsi too.. but same results

pavlin · 03-19-2003, 15:25

Did you tried soft by EMSI? wich vershion is your BE4?

s4sajii · 03-20-2003, 08:00

yes i have tried with EMSI soft ... the s.w. unlock it but phone is not unlocked... version is 138 be4
thank
br

pavlin · 03-20-2003, 08:57

Send me full flash (2MB) at [email protected]
I'll try to help you.

pavlin · 03-20-2003, 08:59

BTW, phone asks for network code or phone code?

s4sajii · 03-20-2003, 12:05

with sim in says ""Nur noch Notrufe moglish!" and without sim in it.. says... "Bitte die SIM-Karte uberprufen !"
i have first make the back up and then full flash it with the flash file present at www.vickygsm.cz/flashes ,,, then i put the sim in the phone and it asks for the network code... i then unlock it.... again it unlocked sucessfully. but when i put the sim in the phone and power it on. it restart automatically when try to search the network.. ... then i put back the backup... and its start behaving like i have done nothingo on it...
thank
br
i will try to send u the flash file today..

Nabil3H · 03-22-2003, 15:21

Try to flash it with the 4 flashes with Be4 repair program

jerrel · 04-18-2003, 21:38

Hi,

I also tored every soft there is i think.
The phone keeps dispalying "CODE TEL".
It looks like a phone code,

Any idea how i can read this phone code.

Thanks

Jerrel

jerrel · 04-18-2003, 21:42

P.s

I also have a version 138 with encrypted IMEI.

Forgot to post that to

Wray · 04-18-2003, 22:10

Hi,

man, this is not Network code, this is phone code. The universal master code works 100%. If you don't know it, read old posts.

jerrel · 04-21-2003, 23:00

Hi Wray,

I found the mastercode for the BE 4 83227423.
However if i enter this code when the phone displays "code tel", the phone dies.

Should i maybe enter this code somewhere else, is there a special code i should enter in order to fill in thios code ?

Please inform me.

P.s i also read something about ###337*07# .
It seems that this code resets the phone ?????

Regards

jerrel

Raklm · 04-22-2003, 08:11

If phone dies after entering mastercode is fault in .teh zone or hardware fault on RF part

Or maybe bad batery.

BR
Rak|m

UU2 · 05-06-2003, 20:02

Hay!One litle problem

ne BE4 sw138 upgrade sw135 /before backup tech zone Lotto/ every funkcion oké,but in vain load orig tech zone,IMEI not OLD! What problem?

03-15-2003, 06:08	#1 (permalink)
s4sajii Banned Join Date: Oct 2001 Location: JMB Age: 49 Posts: 1,226 Member: 6919 Status: Offline Thanks Meter: 12	be4 imei crypted.. cannt unlock i have tried evey s.w. but cannt unlock it.. the mcom 5.5 lite shows the iemi crypted....it unlock it but phone is still locked.. i have tried emsi too.. but same results

04-18-2003, 21:38	#8 (permalink)
jerrel Freak Poster Join Date: Apr 2003 Posts: 172 Member: 25917 Status: Offline Thanks Meter: 0	Alcatel BE4 "CODE TEL" Hi, I also tored every soft there is i think. The phone keeps dispalying "CODE TEL". It looks like a phone code, Any idea how i can read this phone code. Thanks Jerrel

04-18-2003, 21:42	#9 (permalink)
jerrel Freak Poster Join Date: Apr 2003 Posts: 172 Member: 25917 Status: Offline Thanks Meter: 0	p.s P.s I also have a version 138 with encrypted IMEI. Forgot to post that to

05-06-2003, 20:02	#13 (permalink)
UU2 No Life Poster Join Date: Feb 2003 Posts: 603 Member: 21987 Status: Offline Thanks Meter: 27	Hay!One litle problemne BE4 sw138 upgrade sw135 /before backup tech zone Lotto/ every funkcion oké,but in vain load orig tech zone,IMEI not OLD! What problem?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-19-2003, 15:25	#2 (permalink)
pavlin No Life Poster Join Date: Apr 2000 Location: Tansania Posts: 729 Member: 1233 Status: Offline Thanks Meter: 2	Did you tried soft by EMSI? wich vershion is your BE4?

03-20-2003, 08:00	#3 (permalink)
s4sajii Banned Join Date: Oct 2001 Location: JMB Age: 49 Posts: 1,226 Member: 6919 Status: Offline Thanks Meter: 12	yes i have tried with EMSI soft ... the s.w. unlock it but phone is not unlocked... version is 138 be4 thank br

03-20-2003, 08:57	#4 (permalink)
pavlin No Life Poster Join Date: Apr 2000 Location: Tansania Posts: 729 Member: 1233 Status: Offline Thanks Meter: 2	Send me full flash (2MB) at [email protected] I'll try to help you.

03-20-2003, 08:59	#5 (permalink)
pavlin No Life Poster Join Date: Apr 2000 Location: Tansania Posts: 729 Member: 1233 Status: Offline Thanks Meter: 2	BTW, phone asks for network code or phone code?

03-20-2003, 12:05	#6 (permalink)
s4sajii Banned Join Date: Oct 2001 Location: JMB Age: 49 Posts: 1,226 Member: 6919 Status: Offline Thanks Meter: 12	with sim in says ""Nur noch Notrufe moglish!" and without sim in it.. says... "Bitte die SIM-Karte uberprufen !" i have first make the back up and then full flash it with the flash file present at www.vickygsm.cz/flashes ,,, then i put the sim in the phone and it asks for the network code... i then unlock it.... again it unlocked sucessfully. but when i put the sim in the phone and power it on. it restart automatically when try to search the network.. ... then i put back the backup... and its start behaving like i have done nothingo on it... thank br i will try to send u the flash file today..

03-22-2003, 15:21	#7 (permalink)
Nabil3H Freak Poster Join Date: Nov 2002 Location: Egypt Posts: 320 Member: 17675 Status: Offline Thanks Meter: 18	Try to flash it with the 4 flashes with Be4 repair program

04-18-2003, 22:10	#10 (permalink)
Wray Freak Poster Join Date: Jun 2002 Location: Romania Posts: 396 Member: 13153 Status: Offline Thanks Meter: 0	Hi, man, this is not Network code, this is phone code. The universal master code works 100%. If you don't know it, read old posts.

04-21-2003, 23:00	#11 (permalink)
jerrel Freak Poster Join Date: Apr 2003 Posts: 172 Member: 25917 Status: Offline Thanks Meter: 0	Hi Wray, I found the mastercode for the BE 4 83227423. However if i enter this code when the phone displays "code tel", the phone dies. Should i maybe enter this code somewhere else, is there a special code i should enter in order to fill in thios code ? Please inform me. P.s i also read something about ###337*07# . It seems that this code resets the phone ????? Regards jerrel

04-22-2003, 08:11	#12 (permalink)
Raklm No Life Poster Join Date: Aug 2001 Location: Roma Age: 49 Posts: 4,481 Member: 5926 Status: Offline Thanks Meter: 275	If phone dies after entering mastercode is fault in .teh zone or hardware fault on RF part Or maybe bad batery. BR Rak\|m

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Vodafone 231 imei crypt ?	Svetli	GSM Programming & Reverse Engineering	7	02-20-2009 16:05
Cannt unlock Lg L1100	s4sajii	Redbox	11	05-31-2005 17:46
cannt unlock gd67	s4sajii	Panasonic	15	08-13-2003 10:18
cannt unlock A55	s4sajii	E-Gold Based Phones	0	07-06-2003 13:43