be4 powers on when unlock is pressed - GSM-Forum

shaider · 01-24-2002, 16:06

i try to use different softwares to unlock be4, but in all cases the phone powers on and doesn't unlock, i know my cable is good coz it can unlock be1 w/o problems, it has no external batt. pls help thanks

01-25-2002, 02:40

Chek prints inside the phone. In some cases RX or TX prints may be broken.

sladjan_vasic · 01-25-2002, 12:49

use cable with external power,remove batery and use software albe4 mcomm 2001 (allbe4new2808) for v138, or alcatelbe1-be3-be4 eraser v.3.3 for older version regards..Sladjan

shaider · 01-25-2002, 15:16

can u email me the schematic thanks [email protected]

Sonia · 01-29-2002, 02:37

Chek mail!

Regards Sonia

Mr_Skoku · 01-29-2002, 14:51

pls send cable sheme to mee too.

WBR Mr_Skoku

Unlock-DK · 01-29-2002, 19:57

Plz send the schematic to me

shubrt · 01-29-2002, 20:24

Pls Send to Me.Thanx

[email protected]

01-29-2002, 21:43

Idiots !

shubrt · 01-29-2002, 22:08

very thank !!!

[email protected]

HFP · 01-29-2002, 22:21

Yes..new virus ID10T.....Use cable with transistor..and try use different R in base. WBR. Peter

[ 29 January 2002 22:23: Message edited by: HFP ]

01-30-2002, 01:45

Stupid, stupid peoplez... It's not in the cable ! It's in phone - 1.Versions after 137 have about 25% bad units. 1. Bad connector - BAD CONNECTION 2. Dirty prints or moister damage- BAD CONNECTION 3. And finaly, damaged prints BAD CONNECTION Solution: OPen unit, 1. Chek connenctor on phone - thight it if need, 2. Chek prints - with ohm meter 3. Clean all Unlock, or what ever you need.

Coz i haved this very day same **** - language injection - version was 138 04 - and phone powers up when connect is pressed - And think hard ×ôťÍ{ť maybe is some new ****ing SW ? OF COURSE IS NOT ! Just bad unit !

IDIOTS !

01-24-2002, 16:06	#1 (permalink)
shaider Junior Member Join Date: Aug 2001 Location: Philippines Posts: 19 Member: 6012 Status: Offline Thanks Meter: 0	be4 powers on when unlock is pressed i try to use different softwares to unlock be4, but in all cases the phone powers on and doesn't unlock, i know my cable is good coz it can unlock be1 w/o problems, it has no external batt. pls help<br />thanks

01-25-2002, 12:49	#3 (permalink)
sladjan_vasic Junior Member Join Date: Dec 2001 Location: yugoslavia Posts: 25 Member: 8166 Status: Offline Thanks Meter: 0	use cable with external power,remove batery and use software albe4 mcomm 2001 (allbe4new2808) for v138, or alcatelbe1-be3-be4 eraser v.3.3 for older version<br />regards..Sladjan

01-25-2002, 15:16	#4 (permalink)
shaider Junior Member Join Date: Aug 2001 Location: Philippines Posts: 19 Member: 6012 Status: Offline Thanks Meter: 0	can u email me the schematic thanks<br />[email protected]

01-29-2002, 02:37	#5 (permalink)
Sonia Freak Poster Join Date: Jan 2002 Location: Ukraine Age: 48 Posts: 348 Member: 8779 Status: Offline Thanks Meter: 1	Chek mail! Regards<br />Sonia

01-29-2002, 14:51	#6 (permalink)
Mr_Skoku Junior Member Join Date: Sep 2001 Location: Cracow Posts: 29 Member: 6141 Status: Offline Thanks Meter: 0	pls send cable sheme to mee too. WBR <br />Mr_Skoku

01-25-2002, 02:40	#2 (permalink)
legija Guest Posts: n/a Member:	Chek prints inside the phone. In some cases RX or TX prints may be broken.

01-29-2002, 19:57	#7 (permalink)
Unlock-DK Junior Member Join Date: Jan 2002 Location: Denmark Posts: 9 Member: 8735 Status: Offline Thanks Meter: 0	Plz send the schematic to me

01-29-2002, 20:24	#8 (permalink)
shubrt Junior Member Join Date: Jan 2002 Location: Czech Posts: 20 Member: 8512 Status: Offline Thanks Meter: 0	Pls Send to Me.Thanx [email protected]

01-29-2002, 21:43	#9 (permalink)
legija Guest Posts: n/a Member:	Idiots !

01-29-2002, 22:08	#10 (permalink)
shubrt Junior Member Join Date: Jan 2002 Location: Czech Posts: 20 Member: 8512 Status: Offline Thanks Meter: 0	very thank !!! [email protected]

01-29-2002, 22:21	#11 (permalink)
HFP No Life Poster Join Date: Mar 2001 Location: Ukraine,Kiev Age: 48 Posts: 1,605 Member: 3529 Status: Offline Thanks Meter: 1	Yes..new virus ID10T.....Use cable with transistor..and try use different R in base.<br />WBR.<br />Peter <FONT COLOR="#ffff00" SIZE="1">[ 29 January 2002 22:23: Message edited by: HFP ]</font>

01-30-2002, 01:45	#12 (permalink)
legija Guest Posts: n/a Member:	Stupid, stupid peoplez...<br />It's not in the cable !<br />It's in phone -<br />1.Versions after 137 have about 25% bad units.<br />1. Bad connector - BAD CONNECTION<br />2. Dirty prints or moister damage- BAD CONNECTION<br />3. And finaly, damaged prints BAD CONNECTION<br />Solution:<br />OPen unit,<br />1. Chek connenctor on phone - thight it if need,<br />2. Chek prints - with ohm meter<br />3. Clean all<br />Unlock, or what ever you need. Coz i haved this very day same ** - language injection -<br />version was 138 04 - and phone powers up when connect is pressed -<br />And think hard ×ôťÍ{ť<br />maybe is some new **ing SW ?<br /> OF COURSE IS NOT !<br />Just bad unit ! IDIOTS !

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
..::n70 not power on when press power button retu very hot::..	HUM	Nokia Hardware & Hardware Repair	13	12-22-2009 11:40
nokia 6500s it comes on when charging but dose not power on when u press on	4 u man	Nokia Hardware & Hardware Repair	3	04-06-2009 20:29
nokia6600 cannot power on when press switch	dhie2424	Nokia Hardware & Hardware Repair	1	04-20-2008 09:11
t100 not power on after flash, not power on when original cable is plug	GYZMO	VLSI, Conexant, Skyworks and Old Models	8	01-07-2004 00:34
BE4 powering on when I try to connect..	atoo	Alcatel & TCL Old Models	2	12-12-2003 02:57