f285 all version unlock

[king_of_rajasthan]

no need to say what jtag can do.....

only pic of jtag cable for u all my friends.....

[sanjubhai]

will you plz tell the detailed procedure for the unlocking of all versions by jtag
to all the members of this great forum.................

sanjubhai.

[culprit]

this jtag answer is a new ram gopal verma horrer movie reply search.................
phot de di ab khojo indrajal ki maya answer only with ramgopal verma

[vishal 931931]

Originally Posted by king_of_rajasthan

no need to say what jtag can do.....

Only pic of jtag cable for u all my friends.....

have u repaired single set in damru with this jtag

[N.I.T]

Originally Posted by king_of_rajasthan

no need to say what jtag can do.....

only pic of jtag cable for u all my friends.....

what is j tag wat it's cost? i need it pm me or reply here as u wish

[sayyedikram]

working on jtag is not a simple work that uploading a snap that every one can unlock or revive the handset u need corret break point of boot loader and flash dump and also many effort like pinout
the pnout is not same as we work on like rx tx grd there r total 9 pinout in every handset u need to search in sctimectic and some siite like qmat only jtag cant repair any handset u need many paid software also without that software u cant do any thing with jtag
the paid software r some here i mention like
QMAT
JFASHER LECINCE
and many more depend upon cpu
so forget all this bcause if some sell the software in 10000 rs its very cheap to buy bcause that software which is built by jtag its cost near about 40000 to 50000 rs so also there r many diffcultys to buy jtag its not so simply here r some detial of segger jtag
SeGGeR
J-Link ARM
Overview
J-Link ARM Emulator for ARM and Cortex-M3 cores

J-Link is a USB powered JTAG emulator for ARM cores. It connects via USB to the Windows (2000/XP/Vista) PC host.
Features

* Direct download into flash memory of most popular microcontrollers supported
* USB 2.0 interface
* Any ARM7/ARM9/ARM11, Cortex-M0/M1/M3 core support, including thumb mode
* Serial Wire Debug (SWD) support
* Serial Wire Viewer (SWV) support
* Automatic core recognition
* JTAG speed up to 12 MHz
* Download speed up to 720 Kbytes/second (ARM7 @ 50 MHz, 12MHz JTAG speed)
* DCC speed up to 800 Kbytes/second (ARM7 @ 50 MHz, 12MHz JTAG speed)
* Seamless integration into the IAR Embedded Workbench IDE
* No power supply required, powered through USB
* Support for adaptive clocking
* All JTAG signals can be monitored, target voltage can be measured
* Support for multiple devices
* Fully plug and play compatible
* Standard 20-pin JTAG connector
* Wide target voltage range: 1.2V - 3.3V, 5V tolerant
* USB and 20-pin ribbon cable included
* Memory viewer (J-Mem) included
* TCP/IP server included, which allows using J-Link via TCP/IP networks
* RDI interface available, which allows using J-Link with RDI compliant software
* Flash programming software (J-Flash) available
* Flash DLL available, which allows using flash functionality in custom applications
* Software Developer Kit (SDK) available
* Embedded Trace Buffer (ETB) support
* Adapter for 5V JTAG targets available
* 14-pin JTAG adapter available
* Optical isolation adapter available
* Target power supply: J-Link can supply up to 300 mA to target with overload protection

&&&&&&&&&&&&&&&&&

MSL JTaG

Supported CPU's and hardware:
Any phones based on ARM7, ARM9, Qualcomm MSM3000, MSM3100, MSM3300, MSM5000, MSM5100, MSM5105, MSM5500, MSM6000, MSM6025, MSM6050, MSM6100, MSM6125, MSM6245, MSM6250, MSM6260, MSM6275, MSM6280, MSM6300, MSM6500, MSM6550, MSM6571, MSM6800, QSC6010, QSC6020, QSC6030, QSC6055, QSC6065, QSC6075, QSC6085 chipsets, Intel PXA270, Via Telecom CBP4.0, CBP4.1, CBP5.0, CBP5.1, CBP6.0 chipsets. If you have hardware with new or unsupported CPU - we can implement support for new CPU very fast (in days), but we need hardware samples (see F.A.Q.). PXA and QSC60x5 CPU's supported only with Hi-Speed interface.

Supported flash chips:
All known NOR and NAND flash chips used in phones with Qualcomm chipsets. User can use custom flash chip geometry, algo and description with combination of CFI query. All main flash writing algo's supported (Intel, AMD, SST, Mitsibishi, Toshiba, Samsung etc.).

MSL JTAG main purposes:
- Repair "dead" phones with damaged boot block or flash content.
- Reading and writing "protected" NOR and NAND flashes.
- Debuging and creating "inits" for dead phones /wo boot (advanced users only).

MSL JTAG sotware features:
- Easy "One Button" flash or EFS area read/write/erase operations
- Custom device profiles with CPU, RAM, flash chips and other data
- Custom NAND and NOR flashes geometry and algo description
- CPU and core autodetection
- Multiple devices in chain support
- Flash programming of not initialized targets (without RAM and loader).
- Flash programming with flash loader
- User scripts with all internal commands
- ARM debuger

MSL JTAG box features:
- USB powered
- USB 1.1, 2.0 (Full speed) interface
- Maximum JTAG TCK frequency 6 MHz
- LED indication: USB power, USB Enum, Device ready
- Plastic case 50x25x87 mm.

MSL Hi-Speed JTAG box features:
- USB powered
- USB 2.0 High-speed (480 Mbit/sec) interface
- Programmable JTAG (TCK) speed up to 100 MHz
- Adaptive clocking (RTCK) support, fully controlled by hardware (no RTCK infinite states)
- Programmable RTCK sampling frequency up to 200 MHz
- Hardware implemented JCQ technology (low-level JTAG commands queue)
- Programmable voltage range from 1.2V to 3.3V (10 bit DAC)
- Target and JTAG voltage level control (two 10 bit ADC)
- High-level functions (such as flash r/w) are performed inside the device and controlled by JTAG CPU
- JTAG CPU: ARM9 running at freq. up to 220 Mhz
- LED indication: Device State, USB power, USB read/write, JTAG activity
- Black aluminium case 55x25x100 mm.

[compue]

Originally Posted by sayyedikram

working on jtag is not a simple work that uploading a snap that every one can unlock or revive the handset u need corret break point of boot loader and flash dump and also many effort like pinout
the pnout is not same as we work on like rx tx grd there r total 9 pinout in every handset u need to search in sctimectic and some siite like qmat only jtag cant repair any handset u need many paid software also without that software u cant do any thing with jtag
the paid software r some here i mention like
QMAT
JFASHER LECINCE
and many more depend upon cpu
so forget all this bcause if some sell the software in 10000 rs its very cheap to buy bcause that software which is built by jtag its cost near about 40000 to 50000 rs so also there r many diffcultys to buy jtag its not so simply here r some detial of segger jtag
SeGGeR
J-Link ARM
Overview
J-Link ARM Emulator for ARM and Cortex-M3 cores

J-Link is a USB powered JTAG emulator for ARM cores. It connects via USB to the Windows (2000/XP/Vista) PC host.
Features

* Direct download into flash memory of most popular microcontrollers supported
* USB 2.0 interface
* Any ARM7/ARM9/ARM11, Cortex-M0/M1/M3 core support, including thumb mode
* Serial Wire Debug (SWD) support
* Serial Wire Viewer (SWV) support
* Automatic core recognition
* JTAG speed up to 12 MHz
* Download speed up to 720 Kbytes/second (ARM7 @ 50 MHz, 12MHz JTAG speed)
* DCC speed up to 800 Kbytes/second (ARM7 @ 50 MHz, 12MHz JTAG speed)
* Seamless integration into the IAR Embedded Workbench IDE
* No power supply required, powered through USB
* Support for adaptive clocking
* All JTAG signals can be monitored, target voltage can be measured
* Support for multiple devices
* Fully plug and play compatible
* Standard 20-pin JTAG connector
* Wide target voltage range: 1.2V - 3.3V, 5V tolerant
* USB and 20-pin ribbon cable included
* Memory viewer (J-Mem) included
* TCP/IP server included, which allows using J-Link via TCP/IP networks
* RDI interface available, which allows using J-Link with RDI compliant software
* Flash programming software (J-Flash) available
* Flash DLL available, which allows using flash functionality in custom applications
* Software Developer Kit (SDK) available
* Embedded Trace Buffer (ETB) support
* Adapter for 5V JTAG targets available
* 14-pin JTAG adapter available
* Optical isolation adapter available
* Target power supply: J-Link can supply up to 300 mA to target with overload protection

&&&&&&&&&&&&&&&&&

MSL JTaG

Supported CPU's and hardware:
Any phones based on ARM7, ARM9, Qualcomm MSM3000, MSM3100, MSM3300, MSM5000, MSM5100, MSM5105, MSM5500, MSM6000, MSM6025, MSM6050, MSM6100, MSM6125, MSM6245, MSM6250, MSM6260, MSM6275, MSM6280, MSM6300, MSM6500, MSM6550, MSM6571, MSM6800, QSC6010, QSC6020, QSC6030, QSC6055, QSC6065, QSC6075, QSC6085 chipsets, Intel PXA270, Via Telecom CBP4.0, CBP4.1, CBP5.0, CBP5.1, CBP6.0 chipsets. If you have hardware with new or unsupported CPU - we can implement support for new CPU very fast (in days), but we need hardware samples (see F.A.Q.). PXA and QSC60x5 CPU's supported only with Hi-Speed interface.

Supported flash chips:
All known NOR and NAND flash chips used in phones with Qualcomm chipsets. User can use custom flash chip geometry, algo and description with combination of CFI query. All main flash writing algo's supported (Intel, AMD, SST, Mitsibishi, Toshiba, Samsung etc.).

MSL JTAG main purposes:
- Repair "dead" phones with damaged boot block or flash content.
- Reading and writing "protected" NOR and NAND flashes.
- Debuging and creating "inits" for dead phones /wo boot (advanced users only).

MSL JTAG sotware features:
- Easy "One Button" flash or EFS area read/write/erase operations
- Custom device profiles with CPU, RAM, flash chips and other data
- Custom NAND and NOR flashes geometry and algo description
- CPU and core autodetection
- Multiple devices in chain support
- Flash programming of not initialized targets (without RAM and loader).
- Flash programming with flash loader
- User scripts with all internal commands
- ARM debuger

MSL JTAG box features:
- USB powered
- USB 1.1, 2.0 (Full speed) interface
- Maximum JTAG TCK frequency 6 MHz
- LED indication: USB power, USB Enum, Device ready
- Plastic case 50x25x87 mm.

MSL Hi-Speed JTAG box features:
- USB powered
- USB 2.0 High-speed (480 Mbit/sec) interface
- Programmable JTAG (TCK) speed up to 100 MHz
- Adaptive clocking (RTCK) support, fully controlled by hardware (no RTCK infinite states)
- Programmable RTCK sampling frequency up to 200 MHz
- Hardware implemented JCQ technology (low-level JTAG commands queue)
- Programmable voltage range from 1.2V to 3.3V (10 bit DAC)
- Target and JTAG voltage level control (two 10 bit ADC)
- High-level functions (such as flash r/w) are performed inside the device and controlled by JTAG CPU
- JTAG CPU: ARM9 running at freq. up to 220 Mhz
- LED indication: Device State, USB power, USB read/write, JTAG activity
- Black aluminium case 55x25x100 mm.

good work dear since we are who have heavy work of software want some initial knowledge of j tag since it is very big mystry for all, so now countdown start so all who know about j-tag device share in this great forum.

[AKASHJAIN1187]

Koi new solution nhai he kya

[sabby_singh]

Originally Posted by sayyedikram

working on jtag is not a simple work that uploading a snap that every one can unlock or revive the handset u need corret break point of boot loader and flash dump and also many effort like pinout

great detail explaination
gud work bhai

[Sam-TheMaster]

Originally Posted by king_of_rajasthan

no need to say what jtag can do.....

only pic of j tag cable for u all my friends.....

That's a 1% story of your thread title, now where is the rest part or "even mystery for you "

It's such a time wasting process for those who get this phone, you will even not ready to do j-tag work for 4$ per phone cause it takes more than enough time on single set,

Only used by R-N-D basis and to few program updater to involve result in some other easy way.

Regards,

[imran_panipat]

good in fo brother thanks for this

[king_of_rajasthan]

Originally Posted by Sam-TheMaster

That's a 1% story of your thread title, now where is the rest part or "even mystery for you "

It's such a time wasting process for those who get this phone, you will even not ready to do j-tag work for 4$ per phone cause it takes more than enough time on single set,

Only used by R-N-D basis and to few program updater to involve result in some other easy way.

Regards,

sir have u ever used " msl high speed jtag " see this link for more information

www.mslw.com


it takes 4-5 min in c2906

[Sam-TheMaster]

aha! - See again with view of end user

Higher investment - Before he recover - People usually want working easy solution

even I can own this tool - Do you think I'll buy this for my daily use? NEVER!!!

[king_of_rajasthan]

wait soon omnia repair tool will also work for these models


& we are also working for our low cost jtag i hope soon it will also in the market

[shashankmobile]

@king_of_rajasthan
what do you think Jtag can do every thing if its come in low price. you need more softwares, devices, devlopment tools etc.
Also what about technology you know day by day coming latest security, latest hardware etc, obviously you need more tools.
And what do you want to share with peoples.
Can you explain ?

i am agree with sayyedikram & Sam-TheMaster.





Br.
Shashank