Haier D1600 DAED by software tell me

[suresh_boy04]

when process 45% complete its show error and process stoped.now my set is dead tell how i revive my haier d1600

[mobiletelecom40]

Originally Posted by suresh_boy04

when process 45% complete its show error and process stoped.now my set is dead tell how i revive my haier d1600

any body give this problam's solution
thnks in advance

[nakshatra]

is there any solution for this problem

plz support

[jalarambuldana]

Any body has sollution

[rehmani]

Originally Posted by suresh_boy04

when process 45% complete its show error and process stoped.now my set is dead tell how i revive my haier d1600

take a fully charged battery put into mobile.
open vpst3.1.1 select setting page in flash colum select cp and boot file of d1600 and tick the colum.untick backup esn and akey colum than ok.now select usb comport which u r using to update phone. press update button in vpst in mobile u now press *+pwr button when software say reset by hand u remove batt from mobile and again insert into mobile again press *+ pwr button now software will start download boot file to phone and after donload boot file again ask for reset phone now u again remove batt. insert it again and press power button now software will start to flash your phone if doesn't work try and try again it is 100% working.and one thing you dont forget never remove battery when boot file is downloaded to phone otherwise you have a dead phone which is not recoverable easily.

[~AKSingh~]

Originally Posted by jalarambuldana

Any body has sollution

there are two conditions
set ask for driver or not
if yes
then best way is to >
connect a good handset 1 of them classic 7xx, d1000 or d1600.
load d1600 boot cp.
uncheck all options.
press update > when vpst prompt to manual reset the mobile
just plug in the cable to dead set.
rest of the process is same like normal flashing
lastly u il be having working set.
this process is applicable on all via cpu products
having usb interface

and in second case what i have been experiencing is,
one can not revive a dead via usb product
if no driver is being detected.
better to change flash chip by any of these kind of products

br,
a.k.singh