3210 - Cant read phone....???? - GSM-Forum

Ell-Ess-Dee · 11-27-2001, 08:21

When using Dejan or Dark to read my 3210 for back-up, I get error message at the address 0022700 - Init Error TX=0... The flash ID is 00898890 which I understand is the normal type.. Anyone shed some light on this??

I have tried all the boot loaders and both original and patched f loader

It read all the way once but the back-up became garbage..

[ 27 November 2001 10:06: Message edited by: Ell-Ess-Dee ]

aspog · 11-28-2001, 12:44

I have the same problem Mate. I get the same error with my 3210 V5.10. Reading stopped at around 7%. Twice I was able to read up to 100% only to find out that NKFree can't open it. (garbage data I assumed!)

Anyone who has full V5.10 ppmA?

Thanks...

<img src="cool.gif" border="0"> <img src="cool.gif" border="0"> <img src="cool.gif" border="0">

joey · 11-28-2001, 15:47

Hey, men what types of CPU and motherboards you have? Dejan flasher is hardware dependent... I had Pentium II 350 MHz with QDI Brilliant X1S motherboard and I could fully use dejan's flasher. Now I have a Duron 750 MHz,QDI Kineti Z7B motherboard and sometimes I have difficulties to read the phones. I suggest you use Nokia Downloader(for windows) and set the time delay to 10 (or bigger, if you have faster CPU)This should help you <img src="wink.gif" border="0"> I even tried to flash my motherboard BIOS to newer one, this helped a little (now I can read some phones I wasn't able to read)...

Good luck <img src="smile.gif" border="0">

joey.

din · 11-28-2001, 20:36

My problem isn`t CPU or Motherboard...

My problem is, that I have one phone which can`t be unlocked, because it has atypical flash ID.

I`ve unlocked many Nokias on my PC (Duron 800, Elitegroup motherboard)

It`s flash ID is: 20610F6A and if you look to the flash list, you didn`t find it...

The problem is, that my friend has tried to unlock it via NU2000 v1.11b a it write error during erasing flash. <img src="frown.gif" border="0">

The phone is working, but it restarts (turn OFF and turn ON), it is turning OFF a the phone is TOTALY CRAZY <img src="frown.gif" border="0">

NOBODY HAS ANY ADVICE ??????? PLEASE HELP....

(Today i`ve tried it on other PC, but nothing changed <img src="frown.gif" border="0"> )

davieb · 11-28-2001, 22:47

I have the same problem with 3210's.. My 6150 and 6210 work fine but some 3210's dont.. I just flashed (read and wrote) a v5.27 (i think) and it worked fine with intel16 loaders. But, my mates v5.36 uses atmel loaders, tho none of them worked! I had to use Jethro unlocker to do it - kinda risky since i couldn't backup (i'm paranoid.. lol) but it worked fine.. I recommend Jethro to anyone who can't read/write their fone using conventional means..

Dj King · 11-28-2001, 23:29

Hi Joey! Where I can get this Nokia Downloader? Can you tell me where I can find this progs? <img src="confused.gif" border="0">

Ell-Ess-Dee · 12-12-2001, 09:56

Well, I tried and I tried but no luck...

Anyways I took the chance and used NU3000 to unlock and thankfully it worked (risky YES), But I only bought the phone for 12 quid..

My CPU is AMD 1GHZ running on an ABIT KT7, but I have had no probs in the past except coming to this phone in particular...

Very strange i know, but eh, thats life I guess..

11-27-2001, 08:21	#1 (permalink)
Ell-Ess-Dee Junior Member Join Date: Sep 2001 Location: South West - UK Posts: 25 Member: 6338 Status: Offline Thanks Meter: 0	3210 - Cant read phone....???? When using Dejan or Dark to read my 3210 for back-up, I get error message at the address 0022700 - Init Error TX=0... The flash ID is 00898890 which I understand is the normal type.. Anyone shed some light on this?? I have tried all the boot loaders and both original and patched f loader It read all the way once but the back-up became garbage.. <FONT COLOR="#ffff00" SIZE="1">[ 27 November 2001 10:06: Message edited by: Ell-Ess-Dee ]</font>

11-28-2001, 15:47	#3 (permalink)
joey Junior Member Join Date: May 2001 Posts: 7 Member: 4806 Status: Offline Thanks Meter: 0	Hey, men what types of CPU and motherboards you have? Dejan flasher is hardware dependent...<br />I had Pentium II 350 MHz with QDI Brilliant X1S motherboard and I could fully use dejan's flasher. Now I have a Duron 750 MHz,QDI Kineti Z7B motherboard and sometimes I have difficulties to read the phones. I suggest you use Nokia Downloader(for windows) and set the time delay to 10 (or bigger, if you have faster CPU)This should help you <img src="wink.gif" border="0"> <br />I even tried to flash my motherboard BIOS to newer one, this helped a little (now I can read some phones I wasn't able to read)... Good luck <img src="smile.gif" border="0"> joey.

11-28-2001, 20:36	#4 (permalink)
din No Life Poster Join Date: May 2001 Location: Czech Republic Age: 42 Posts: 572 Member: 4601 Status: Offline Thanks Meter: 1	My problem isn`t CPU or Motherboard... My problem is, that I have one phone which can`t be unlocked, because it has atypical flash ID. I`ve unlocked many Nokias on my PC (Duron 800, Elitegroup motherboard) It`s flash ID is: 20610F6A and if you look to the flash list, you didn`t find it... The problem is, that my friend has tried to unlock it via NU2000 v1.11b a it write error during erasing flash. <img src="frown.gif" border="0"> The phone is working, but it restarts (turn OFF and turn ON), it is turning OFF a the phone is TOTALY CRAZY <img src="frown.gif" border="0"> NOBODY HAS ANY ADVICE ???????<br />PLEASE HELP.... (Today i`ve tried it on other PC, but nothing changed <img src="frown.gif" border="0"> )

11-28-2001, 22:47	#5 (permalink)
davieb No Life Poster Join Date: May 2001 Location: Glasgow, Scotland Posts: 625 Member: 4690 Status: Offline Thanks Meter: 1	I have the same problem with 3210's..<br />My 6150 and 6210 work fine but some 3210's dont..<br />I just flashed (read and wrote) a v5.27 (i think) and it worked fine with intel16 loaders.<br />But, my mates v5.36 uses atmel loaders, tho none of them worked!<br />I had to use Jethro unlocker to do it - kinda risky since i couldn't backup (i'm paranoid.. lol) but it worked fine..<br />I recommend Jethro to anyone who can't read/write their fone using conventional means..

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
i have a probleme with bb5 phone, hwk cant read phone info corectly	yassinek85	HWK	8	10-27-2009 04:58
Katalyst T739 Online Cant Read Phone	chiragp	Easy-Unlocker	4	06-16-2008 14:53
T65 no network, cant read phone book	manijak	Sony Ericsson Hardware Repair	3	04-15-2003 08:51

11-28-2001, 12:44	#2 (permalink)
aspog Freak Poster Join Date: Apr 2001 Location: Philippines Posts: 152 Member: 4215 Status: Offline Thanks Meter: 1	I have the same problem Mate. I get the same error with my 3210 V5.10. Reading stopped at around 7%. Twice I was able to read up to 100% only to find out that NKFree can't open it. (garbage data I assumed!) Anyone who has full V5.10 ppmA? Thanks... <img src="cool.gif" border="0"> <img src="cool.gif" border="0"> <img src="cool.gif" border="0">

11-28-2001, 23:29	#6 (permalink)
Dj King Freak Poster Join Date: Sep 2001 Location: Galaxy far far away! Posts: 397 Member: 6428 Status: Offline Thanks Meter: 43	Hi Joey! Where I can get this Nokia Downloader? Can you tell me where I can find this progs? <img src="confused.gif" border="0">

12-12-2001, 09:56	#7 (permalink)
Ell-Ess-Dee Junior Member Join Date: Sep 2001 Location: South West - UK Posts: 25 Member: 6338 Status: Offline Thanks Meter: 0	Well, I tried and I tried but no luck... Anyways I took the chance and used NU3000 to unlock and thankfully it worked (risky YES), But I only bought the phone for 12 quid.. My CPU is AMD 1GHZ running on an ABIT KT7, but I have had no probs in the past except coming to this phone in particular... Very strange i know, but eh, thats life I guess..