My Nokia 3310 have no signal!!! - GSM-Forum

tomekkk · 03-06-2002, 21:19

I bought Nokia 3310 which was bad flashed (with eeprom). Now it have no network. I tried to flash it with full flash (with eeprom) and then I use Eeprom tools 3.0 to change IMEI, calculate and update FAID and unlock SP. But it still have no network. After turning on there is network for 10 seconds and after this time there isn't network. Can it be an original IMEI which I don't change? How I can change my Original IMEI? I have a Dejan flasher cable and dual (MBUS & FBUS). Do you know what can it be? I have two Nokias 3310 and both have the same problem.

Yolly Zubrick · 03-06-2002, 21:35

Are you sure your FAID update and SP lock and Factory reset were successful with your dual M/FBUS cable?

That might be the culprit!

Try doing it with NK_CALC!! If it dont get signal, better think of a "harder" problem like HARDware

Yup, if all software solution don't work, you're left with the option to bring it back to your nearest NOKIA service Center.

tomekkk · 03-06-2002, 21:42

It can't be hardware problem, becouse the man who sold me the phone unlocked badly the phone and flashed eeprom. But before this the phone worked correctly. I'm sure you sure that FAID update and SP lock and Factory reset were successful with dual M/FBUS cable. I know that many people have the same problem as me, but they also don't know what to do. Now I can't use nk_calc because I havent MBUS cable, I have only Dual. Are there some differences between effects of NK_CALC and EEPROM TOOLS?

BrainShutdown · 03-07-2002, 07:54

Hi,
Try to use knok,
flash the phone with full flash mcu+ppm+eeprom put original imei & imei back to original as in phone´s label.
Then calc Sp with knok.

Good Luck

blutac · 03-07-2002, 10:57

Quote:

Originally posted by BrainShutdown
Hi,
Try to use knok,
flash the phone with full flash mcu+ppm+eeprom put original imei & imei back to original as in phone´s label.
Then calc Sp with knok.

Good Luck

Could you please point me as to where to get the new version knok from Tibor. I got the old one and can'tseem to get it to work.

thanks in advance.

hooi76 · 03-15-2002, 02:08

try this site http://www.schwantz.hpg.ig.com.br/mypage.htm

03-06-2002, 21:19	#1 (permalink)
tomekkk Junior Member Join Date: Mar 2002 Posts: 6 Member: 9980 Status: Offline Thanks Meter: 0	My Nokia 3310 have no signal!!! I bought Nokia 3310 which was bad flashed (with eeprom). Now it have no network. I tried to flash it with full flash (with eeprom) and then I use Eeprom tools 3.0 to change IMEI, calculate and update FAID and unlock SP. But it still have no network. After turning on there is network for 10 seconds and after this time there isn't network. Can it be an original IMEI which I don't change? How I can change my Original IMEI? I have a Dejan flasher cable and dual (MBUS & FBUS). Do you know what can it be? I have two Nokias 3310 and both have the same problem.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Pls Help my nokia 1100 has no signal!	redge	Nokia Hardware & Hardware Repair	3	05-25-2006 10:54
How to make 3310 have a Signal light?	2100	Nokia Hardware & Hardware Repair	5	05-05-2003 14:40
Nokia 3310/3330 No network signal	blaat	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	6	07-27-2002 01:35
I want to try my Imei Nr. in my Nokia 3310?	Mastermo	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	10-17-2001 19:59
3310 with no Signal..	JammerOne	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	04-29-2001 18:24

03-06-2002, 21:35	#2 (permalink)
Yolly Zubrick Freak Poster Join Date: Jan 2002 Location: Iloilo City, The Philippines Posts: 440 Member: 8396 Status: Offline Thanks Meter: 2	Are you sure your FAID update and SP lock and Factory reset were successful with your dual M/FBUS cable? That might be the culprit! Try doing it with NK_CALC!! If it dont get signal, better think of a "harder" problem like HARDware Yup, if all software solution don't work, you're left with the option to bring it back to your nearest NOKIA service Center.

03-06-2002, 21:42	#3 (permalink)
tomekkk Junior Member Join Date: Mar 2002 Posts: 6 Member: 9980 Status: Offline Thanks Meter: 0	It can't be hardware problem, becouse the man who sold me the phone unlocked badly the phone and flashed eeprom. But before this the phone worked correctly. I'm sure you sure that FAID update and SP lock and Factory reset were successful with dual M/FBUS cable. I know that many people have the same problem as me, but they also don't know what to do. Now I can't use nk_calc because I havent MBUS cable, I have only Dual. Are there some differences between effects of NK_CALC and EEPROM TOOLS?

03-07-2002, 07:54	#4 (permalink)
BrainShutdown Insane Poster Join Date: Dec 2001 Location: Portugal Posts: 60 Member: 7814 Status: Offline Thanks Meter: 0	Hi, Try to use knok, flash the phone with full flash mcu+ppm+eeprom put original imei & imei back to original as in phone´s label. Then calc Sp with knok. Good Luck

03-15-2002, 02:08	#6 (permalink)
hooi76 No Life Poster Join Date: Dec 2001 Location: In front of my computer Posts: 1,594 Member: 7741 Status: Offline Thanks Meter: 111	try this site http://www.schwantz.hpg.ig.com.br/mypage.htm