3210 with T- D1 Simlock on MCC+MNC ?? - GSM-Forum

ceko · 10-04-2000, 22:46

Hello,

I have an 3210 with Software V 5.36, from Telekom T- D1 X-Tra Card. I tryed the unlocking method from the other Lock on MSIN with Pin 6+7, but it dosn`t work.
The Sim-Lock is on MCC+MNC which shows me the number 26201 and closed ( with Nokiatool 034 )

Help !!??!!

ceko

Stryker · 10-05-2000, 01:16

hi!

do the pin5-grounding method. it works 100%.
just read the previous topics for the info.
or you can mail me.

regards

Stryker

Abdul · 10-14-2000, 17:25

Can i have some info on that please i have same problem as ceko, but my one dosnt run on any net locked to all nets, please help me my E-Mail is [email protected]

Megachatter · 10-17-2000, 11:01

Hi Guys!

I've the same Problem like Ceko and i tried the Pin 5 method with Nokiatool 034. It seemed to be succesfull. Before i put the phone together all locks were opened and all seemed to be right (IMEI- and other numbers).
After i've finished i put in a sim-card, turned on the phone and there was it: CONTACT SERVICE!
What can I do now? Is there any way to get the phone to work?

Stryker: 100% ????

I hope someone can help me

Megachatter

ceko · 10-17-2000, 21:35

Hello again,

my problem goes on. I tried everything, but it would not work.

Last question, how can repair my handy, other way by money, i will pay for it.

Please write if you are in Berlin- Germany.
Thanks a lot.

ceko

10-04-2000, 22:46	#1 (permalink)
ceko Junior Member Join Date: Aug 2000 Location: germany Posts: 7 Member: 1914 Status: Offline Thanks Meter: 0	3210 with T- D1 Simlock on MCC+MNC ?? Hello, I have an 3210 with Software V 5.36, from Telekom T- D1 X-Tra Card. I tryed the unlocking method from the other Lock on MSIN with Pin 6+7, but it dosn`t work. The Sim-Lock is on MCC+MNC which shows me the number 26201 and closed ( with Nokiatool 034 ) Help !!??!! ceko

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
N80 with configuration key FFFFFFFFFFFF and MCC+MNC FFFFF	Burnt Cobba	Nokia Base Band 5 ( BB-5 )	9	10-03-2007 06:15
New dct4 cala,will calculate phone with extended Mcc,Mnc,,DOWNLOAD HERE	GSM Solutions Ireland	Nokia Multimedia	0	10-13-2003 20:05
New Dct4 cala..will also calculate ATT and Fido.,.with extended mcc,mnc DOWNLOAD HERE	GSM Solutions Ireland	GSM Mobile Links	0	10-13-2003 19:33
Need MCC+MNC on a 6100	yeldar	Nokia Multimedia	11	09-27-2003 17:58
MCC+MNC, GID1, GID2, MSIN after unlock?	UUS	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	11-19-2001 20:25

10-05-2000, 01:16	#2 (permalink)
Stryker Freak Poster Join Date: Jun 2000 Location: In front of pc Posts: 308 Member: 1585 Status: Offline Thanks Meter: 15	hi! do the pin5-grounding method. it works 100%. just read the previous topics for the info. or you can mail me. regards Stryker

10-14-2000, 17:25	#3 (permalink)
Abdul Junior Member Join Date: Oct 2000 Location: U.K Posts: 26 Member: 2316 Status: Offline Thanks Meter: 0	Can i have some info on that please i have same problem as ceko, but my one dosnt run on any net locked to all nets, please help me my E-Mail is [email protected]

10-17-2000, 11:01	#4 (permalink)
Megachatter Junior Member Join Date: Oct 2000 Posts: 1 Member: 2337 Status: Offline Thanks Meter: 0	Hi Guys! I've the same Problem like Ceko and i tried the Pin 5 method with Nokiatool 034. It seemed to be succesfull. Before i put the phone together all locks were opened and all seemed to be right (IMEI- and other numbers). After i've finished i put in a sim-card, turned on the phone and there was it: CONTACT SERVICE! What can I do now? Is there any way to get the phone to work? Stryker: 100% ???? I hope someone can help me Megachatter

10-17-2000, 21:35	#5 (permalink)
ceko Junior Member Join Date: Aug 2000 Location: germany Posts: 7 Member: 1914 Status: Offline Thanks Meter: 0	Hello again, my problem goes on. I tried everything, but it would not work. Last question, how can repair my handy, other way by money, i will pay for it. Please write if you are in Berlin- Germany. Thanks a lot. ceko