3210 v5.36 ID 00898890 wich tia?!? - GSM-Forum

MaRiN · 01-13-2001, 15:47

I have three 3210 v5.36 from D2 with ID 00898890 ->Intel 28F160B3-T 16MB, and I try with many tias but I can't read or write to this phone.
If somebady have a working f_loader, and boot.bin for this phone, please, send it to me!

P.S.
3210 v6.0 with other ID I can read without problem!

Rui · 01-14-2001, 02:22

Look at your mailbox!

MaRiN · 01-14-2001, 12:49

With this bootloader, and f_loader, when I try to write to phone I get this
message:

Boot Loader is Ready
...
Flash Loader is Ready
...
Erasing Flash
...
Erase Flash Error!
Addr: 00200000 In: FF Flash: 20

With other boot and f_loader, sometimes I got message:

CMD Error!

Does somebady know where is the problem?!?
I try on 3 phones with this ID, and always the same!
:-(((

jackero · 01-14-2001, 23:41

Hi,
same flash ID, but 3310 v4.06 . Flasher said "Done". But:
All i achived is to kill the mobile, can someone send me good fls or better whole flash? Or link? I had succes to download from Fatum today.
Regards,

TreshSD · 01-15-2001, 00:43

MaRiN: I've sent you the corret files.
Regards

MaRiN · 01-17-2001, 01:24

To TreshSD:
Still dont work! :-(((

Remco · 01-17-2001, 23:05

hi,

I have problems with a 3210 v5.36 with id 001F00C0.
I tried several L_loaders,but no result.
I can read but when i check the file i see only ff 00 ff 00.
Can someone send me correct F_loader or boot?

Regards Remco

------------------

MaRiN · 01-18-2001, 01:29

antil now I got 6 3210. 5 are ID 00898890 and one is ID 001F00C0 and I can't read or write anyone :-(((

5110 and 3310 I read and write without problem!

What is it with tia files for this IDs?

James Chang · 01-18-2001, 01:43

ID:001F00c0 means that flash is Atmel AT49bv160. You can use w49bv160.tia as f_loader.bin.

MaRiN · 01-18-2001, 02:26

Quote:

Originally posted by James Chang:
ID:001F00c0 means that flash is Atmel AT49bv160. You can use w49bv160.tia as f_loader.bin.

I done this but nothing :-(

My LPT port is set ECP+EPP.
Is this correct?

Charly · 01-18-2001, 03:23

Hi Marin

I had problems with dejan but cured all problems by setting in bios to standard printer port also voltage is 5v in SPP and half that in EPP also i notice a few others use SPP Hope this helps.

Regards

Charlie

01-13-2001, 15:47	#1 (permalink)
MaRiN Freak Poster Join Date: Nov 2000 Location: Croatia Age: 47 Posts: 353 Member: 2466 Status: Offline Thanks Meter: 10	3210 v5.36 ID 00898890 wich tia?!? I have three 3210 v5.36 from D2 with ID 00898890 ->Intel 28F160B3-T 16MB, and I try with many tias but I can't read or write to this phone. If somebady have a working f_loader, and boot.bin for this phone, please, send it to me! P.S. 3210 v6.0 with other ID I can read without problem!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nokia 3210 v5.36/v5.31 unlocker by Krusty	syd	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	6	12-17-2000 22:35
I HAVE 3210 v5.36 SOLUTION ! ! ! ! !	DaggeR	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	35	09-14-2000 00:35
Problem with 3210 v5.36 unlock software	Braker	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	09-08-2000 17:11
3210 v5.36, 5110 v5.29 HELP	mobilemonster	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	12	09-08-2000 16:00
Unlock by cable for 3210 v5.36 EXISTS!	ZF	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	08-29-2000 23:00

01-14-2001, 02:22	#2 (permalink)
Rui Major Poster Join Date: Mar 2000 Location: Portugal Posts: 42 Member: 1109 Status: Offline Thanks Meter: 1	Look at your mailbox!

01-14-2001, 12:49	#3 (permalink)
MaRiN Freak Poster Join Date: Nov 2000 Location: Croatia Age: 47 Posts: 353 Member: 2466 Status: Offline Thanks Meter: 10	With this bootloader, and f_loader, when I try to write to phone I get this message: Boot Loader is Ready ... Flash Loader is Ready ... Erasing Flash ... Erase Flash Error! Addr: 00200000 In: FF Flash: 20 With other boot and f_loader, sometimes I got message: CMD Error! Does somebady know where is the problem?!? I try on 3 phones with this ID, and always the same! :-(((

01-14-2001, 23:41	#4 (permalink)
jackero Junior Member Join Date: Jan 2001 Posts: 7 Member: 3037 Status: Offline Thanks Meter: 0	Hi, same flash ID, but 3310 v4.06 . Flasher said "Done". But: All i achived is to kill the mobile, can someone send me good fls or better whole flash? Or link? I had succes to download from Fatum today. Regards,

01-15-2001, 00:43	#5 (permalink)
TreshSD Insane Poster Join Date: Jan 2001 Posts: 95 Member: 3043 Status: Offline Thanks Meter: 0	MaRiN: I've sent you the corret files. Regards

01-17-2001, 01:24	#6 (permalink)
MaRiN Freak Poster Join Date: Nov 2000 Location: Croatia Age: 47 Posts: 353 Member: 2466 Status: Offline Thanks Meter: 10	To TreshSD: Still dont work! :-(((

01-17-2001, 23:05	#7 (permalink)
Remco No Life Poster Join Date: Jul 1999 Location: Netherlands Age: 57 Posts: 669 Member: 334 Status: Offline Thanks Meter: 119	hi, I have problems with a 3210 v5.36 with id 001F00C0. I tried several L_loaders,but no result. I can read but when i check the file i see only ff 00 ff 00. Can someone send me correct F_loader or boot? Regards Remco ------------------

01-18-2001, 01:29	#8 (permalink)
MaRiN Freak Poster Join Date: Nov 2000 Location: Croatia Age: 47 Posts: 353 Member: 2466 Status: Offline Thanks Meter: 10	antil now I got 6 3210. 5 are ID 00898890 and one is ID 001F00C0 and I can't read or write anyone :-((( 5110 and 3310 I read and write without problem! What is it with tia files for this IDs?

01-18-2001, 01:43	#9 (permalink)
James Chang Junior Member Join Date: Dec 2000 Location: China Posts: 11 Member: 2926 Status: Offline Thanks Meter: 0	ID:001F00c0 means that flash is Atmel AT49bv160. You can use w49bv160.tia as f_loader.bin.

01-18-2001, 03:23	#11 (permalink)
Charly No Life Poster Join Date: Sep 2000 Location: UK York Age: 56 Posts: 730 Member: 2008 Status: Offline Thanks Meter: 4	Hi Marin I had problems with dejan but cured all problems by setting in bios to standard printer port also voltage is 5v in SPP and half that in EPP also i notice a few others use SPP Hope this helps. Regards Charlie