3210 v6 ID: 001F00C0 ... flasher don't read .which tia ? - GSM-Forum

makona · 01-10-2001, 08:13

Hi friends ,
i have problem with this phone ..
i readed another 3210 phones ver 6 but with another flash id .. i think its intel .. it was 898...etc ..
in dev_list.fps says its for ATMEL 16M
and the tia file is : 49BV16 so i patched this file and renamed F-loader.bin ..
flasher shows flas id again and no read .
help me plz
if u sure if this tia so plz send me it to [email protected]

thnx alot
regards
MESHOz

fido · 01-10-2001, 19:41

i HAVE A SAME PROBLEM...
EHAT IS THE GOOD TIA AND BOOT FOR THIS ??

BYE

MaRiN · 01-11-2001, 01:27

I read this phone with AWbv16.tia file, and it works for me !

I need flas backup for 3210 v6.0 for Western Europe, because with backup from fatum's page phone has No network.
Could somebady tell me where can I find this file?

makona · 01-11-2001, 07:03

Hi Man ...
plz send me this tia file cuz i tried all the tias in my pc without success which i can unlock the other ver 600 not from germany ...
plz help me and send it urgent ..
need it v.v.v.v.fast
i tried write to phone and it stopped in 47% then phone dead ...
my email : [email protected]
or [email protected]

WAITINgNGnGNgngngngngnnggggngngng
THNX

MaRiN · 01-11-2001, 10:50

Look at your mailbox!

cole · 01-11-2001, 18:41

To Marin !

Look at your mailbox!

Cole

makona · 01-12-2001, 00:13

To ALL :
i tried flash phone with wrong tia and it worked untill 24% then stopped .. ( PHONE DEAD ) when i tried the correct f_loader for Atmel ...
unpatched it erasing flash and DONE .then : Flash Status Error
Patched : Flash Status Error .
5.58K F_loader : hangs after erasing Done.
WHATS HAPPEN !!!!
PLZ HELP

To X-shadow :
man u said in your mail THAT i didn't serach for the tia .. no i serached and i got what u told me ATMEL 16M .. and i got the file which will work with it its " aw49bv16.tia" .. but didnt work ..
anyway u sent me wrong file named " uknown " and size is : 19.34 K and dont start like every tia's start .. so plz send me the correct one ..
PS : marin sent me the same file and worked in write in another phone so it was by luck.

To Marin :
your f_loader not patched worked with another phone in write but after patching it and try read .. i got " FLash loader init error tx=1 or 0 "

THNX FRIENDS ,
M E S H O Z

MaRiN · 01-12-2001, 02:16

To meshoz:
With this f_loader I read phone and make backup from adr 200 to 300. After this I unloced phone by partial flash. Phone is unlocked but have No network :-(. Then I write backup in this phe, and phone is dead, WHY!?!
Maybe reading with this tia don't work good?
After that I flash complete backup (adr 200-400)from fatum's site, and phone works but still have No network.

Now I need complete backup for N3210 v6.0 from D2, maybe this solve problem with No network !?!

Coul somebady send to me this file, please?

MaRiN · 01-12-2001, 03:11

I forgot to write that I need full flash backup (adr 200-400) for N3210 v6.0 from D2!

Please send it to to my address: [email protected]

makona · 01-12-2001, 04:39

To All :
still have this stupid problem with 3210 V6 from Orange ( Made in Germany ) Atmel Flash .
now when i tried write all flash from another phone it stop erasing flash and say " erase flash error ADD:0029000 In:FF Flash:FF ...
i u know all what i wrote above about my try to write partial flash to it .. it says " Flash status error " ...

whats wrong with this phone !!?!?!?

To Marin :
your f_loader is unpatched file .. so it will read phone but when u view flash.out u will see it FFFF 0000 so when u write it back u wrote EMPTY flash and phone dead .. this tia work just in write .. but x-shadow tell me that if i patched it it will read .. but i tried 2 read 2 phones ( the dead and the unlocked ).. didn't success ..

anyway , am waiting for help ..
now i hate germany too much

REgards
MESHOZ

makona · 01-12-2001, 06:53

BACK TO LIfE

YEs , phone back to life just now ...
here u will isten 2 v.v.strange try

i tried write on it using my pc which don't work with emmibox and with reading flashs but just now .. i got that it can write

strange that the pc i use with flasher is works 100% with any phone i got except this 3210 and my pc which is stupid also with anything on LPT works well .. !!!
now i wrote full flash from another ver6 phone and no network found ..
so .. i need now full backup from 20-40 3210 ver6 made in germany from orange ..
if anybody have .. mail it to me plz .
and have fun friends ..
i hope somone explain what happened .
p.s : i have another 1 with same info above but did everything to read .. noWay !

THanks to u all.
M E S H O Z

X-Shadow · 01-12-2001, 18:11

[To Mehoz]
What do you mean wrong file!!! I sent you
zip file containing 6 f_loaders that I use
and yes it is 19.34 K and surely it does not
start like any tia files because it is a ZIP
file! Download winzip

By now, if you did not backup your original
flash from damaged phone, you phone is 100%
useless. You can only use it for calculator
and games because you flashed 00200000 to
00400000 which contains security checks
that will tell the phone that the flash is
not the original flash from the phone. In
other words, the IMEI in the EEPROM and Cobba
does not match the IMEI in the Flash. So
even if you put Same Version, same
manufacturer origin, and from same provider,
your phone may power on, but only get network
for 1-3 seconds or sometimes restarts.

And also, why do you say you hate Germany???
I have friends there and I dont think they
are happy when you make this invalid
generalization of Germany

[This message has been edited by X-Shadow (edited 12 January 2001).]

bzegarac · 01-13-2001, 03:33

I had the same problem as meshoz... 3210 v6
I flashed phone with flash from other D2 phone, and now it works normaly...

regards,
Boca

MaRiN · 01-13-2001, 03:40

I am interesting in how many diferent language pack (and flash type) have N3210 v6.0?

makona · 01-13-2001, 10:56

To X-Shadow :
check what i got in usa.net as attachment : Look for 868 bytes boot.bin in the net, I will not send them to you... Ask from other people in the net
Unknown/Unknown (19K)
- so .. now when u told me i renamed it to .zip file and it worked .
- about germany .. sure i don't hate germany and don't hate any country .. its a joke

cuz the phones from germany have problems with dejan .. i didn't mean that and am sorry for that too .!

To ALL :
some ppl in my country add language using this flasher .. how they do that when i can't flash phone from 200-400 like x-shadow said .. !!!

- my 3210 v6 still can't get network and i didn't get any backups from same phones .

regards
meshoz

01-10-2001, 08:13	#1 (permalink)
makona No Life Poster Join Date: Nov 2000 Location: EGYPT Age: 44 Posts: 1,202 Member: 2583 Status: Offline Sonork: 100.88702 Thanks Meter: 203	3210 v6 ID: 001F00C0 ... flasher don't read .which tia ? Hi friends , i have problem with this phone .. i readed another 3210 phones ver 6 but with another flash id .. i think its intel .. it was 898...etc .. in dev_list.fps says its for ATMEL 16M and the tia file is : 49BV16 so i patched this file and renamed F-loader.bin .. flasher shows flas id again and no read . help me plz if u sure if this tia so plz send me it to [email protected] thnx alot regards MESHOz

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
flasher software/cable schematics nokia 3210 v6	killercock	Nokia Hardware & Hardware Repair	4	11-20-2007 17:31
roemmi flasher don't read langpack !	makona	Motorola Old Legacy (EMMI)	8	10-16-2001 03:09
Which TIA for reading and writing flash ID 8988C2 ?	MP	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	04-22-2001 10:49
3210 v6.00 Flash ID: 00898890	bzegarac	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	15	02-14-2001 13:57
unlocking a 3210 with id 001F00C0	BorisBonk	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	02-08-2001 19:49

01-10-2001, 19:41	#2 (permalink)
fido Freak Poster Join Date: Dec 2000 Location: Hungary Posts: 126 Member: 2779 Status: Offline Thanks Meter: 5	i HAVE A SAME PROBLEM... EHAT IS THE GOOD TIA AND BOOT FOR THIS ?? BYE

01-11-2001, 01:27	#3 (permalink)
MaRiN Freak Poster Join Date: Nov 2000 Location: Croatia Age: 47 Posts: 353 Member: 2466 Status: Offline Thanks Meter: 10	I read this phone with AWbv16.tia file, and it works for me ! I need flas backup for 3210 v6.0 for Western Europe, because with backup from fatum's page phone has No network. Could somebady tell me where can I find this file?

01-11-2001, 07:03	#4 (permalink)
makona No Life Poster Join Date: Nov 2000 Location: EGYPT Age: 44 Posts: 1,202 Member: 2583 Status: Offline Sonork: 100.88702 Thanks Meter: 203	Hi Man ... plz send me this tia file cuz i tried all the tias in my pc without success which i can unlock the other ver 600 not from germany ... plz help me and send it urgent .. need it v.v.v.v.fast i tried write to phone and it stopped in 47% then phone dead ... my email : [email protected] or [email protected] WAITINgNGnGNgngngngngnnggggngngng THNX

01-11-2001, 10:50	#5 (permalink)
MaRiN Freak Poster Join Date: Nov 2000 Location: Croatia Age: 47 Posts: 353 Member: 2466 Status: Offline Thanks Meter: 10	Look at your mailbox!

01-11-2001, 18:41	#6 (permalink)
cole No Life Poster Join Date: Oct 2000 Location: Croatia Age: 50 Posts: 622 Member: 2254 Status: Offline Thanks Meter: 3	To Marin ! Look at your mailbox! Cole

01-12-2001, 00:13	#7 (permalink)
makona No Life Poster Join Date: Nov 2000 Location: EGYPT Age: 44 Posts: 1,202 Member: 2583 Status: Offline Sonork: 100.88702 Thanks Meter: 203	To ALL : i tried flash phone with wrong tia and it worked untill 24% then stopped .. ( PHONE DEAD ) when i tried the correct f_loader for Atmel ... unpatched it erasing flash and DONE .then : Flash Status Error Patched : Flash Status Error . 5.58K F_loader : hangs after erasing Done. WHATS HAPPEN !!!! PLZ HELP To X-shadow : man u said in your mail THAT i didn't serach for the tia .. no i serached and i got what u told me ATMEL 16M .. and i got the file which will work with it its " aw49bv16.tia" .. but didnt work .. anyway u sent me wrong file named " uknown " and size is : 19.34 K and dont start like every tia's start .. so plz send me the correct one .. PS : marin sent me the same file and worked in write in another phone so it was by luck. To Marin : your f_loader not patched worked with another phone in write but after patching it and try read .. i got " FLash loader init error tx=1 or 0 " THNX FRIENDS , M E S H O Z

01-12-2001, 02:16	#8 (permalink)
MaRiN Freak Poster Join Date: Nov 2000 Location: Croatia Age: 47 Posts: 353 Member: 2466 Status: Offline Thanks Meter: 10	To meshoz: With this f_loader I read phone and make backup from adr 200 to 300. After this I unloced phone by partial flash. Phone is unlocked but have No network :-(. Then I write backup in this phe, and phone is dead, WHY!?! Maybe reading with this tia don't work good? After that I flash complete backup (adr 200-400)from fatum's site, and phone works but still have No network. Now I need complete backup for N3210 v6.0 from D2, maybe this solve problem with No network !?! Coul somebady send to me this file, please?

01-12-2001, 03:11	#9 (permalink)
MaRiN Freak Poster Join Date: Nov 2000 Location: Croatia Age: 47 Posts: 353 Member: 2466 Status: Offline Thanks Meter: 10	I forgot to write that I need full flash backup (adr 200-400) for N3210 v6.0 from D2! Please send it to to my address: [email protected]

01-12-2001, 04:39	#10 (permalink)
makona No Life Poster Join Date: Nov 2000 Location: EGYPT Age: 44 Posts: 1,202 Member: 2583 Status: Offline Sonork: 100.88702 Thanks Meter: 203	To All : still have this stupid problem with 3210 V6 from Orange ( Made in Germany ) Atmel Flash . now when i tried write all flash from another phone it stop erasing flash and say " erase flash error ADD:0029000 In:FF Flash:FF ... i u know all what i wrote above about my try to write partial flash to it .. it says " Flash status error " ... whats wrong with this phone !!?!?!? To Marin : your f_loader is unpatched file .. so it will read phone but when u view flash.out u will see it FFFF 0000 so when u write it back u wrote EMPTY flash and phone dead .. this tia work just in write .. but x-shadow tell me that if i patched it it will read .. but i tried 2 read 2 phones ( the dead and the unlocked ).. didn't success .. anyway , am waiting for help .. now i hate germany too much REgards MESHOZ

01-12-2001, 06:53	#11 (permalink)
makona No Life Poster Join Date: Nov 2000 Location: EGYPT Age: 44 Posts: 1,202 Member: 2583 Status: Offline Sonork: 100.88702 Thanks Meter: 203	BACK TO LIfE YEs , phone back to life just now ... here u will isten 2 v.v.strange try i tried write on it using my pc which don't work with emmibox and with reading flashs but just now .. i got that it can write strange that the pc i use with flasher is works 100% with any phone i got except this 3210 and my pc which is stupid also with anything on LPT works well .. !!! now i wrote full flash from another ver6 phone and no network found .. so .. i need now full backup from 20-40 3210 ver6 made in germany from orange .. if anybody have .. mail it to me plz . and have fun friends .. i hope somone explain what happened . p.s : i have another 1 with same info above but did everything to read .. noWay ! THanks to u all. M E S H O Z

01-12-2001, 18:11	#12 (permalink)
X-Shadow No Life Poster Join Date: Jan 2000 Location: GSM Forum Posts: 1,108 Member: 871 Status: Offline Thanks Meter: 602	[To Mehoz] What do you mean wrong file!!! I sent you zip file containing 6 f_loaders that I use and yes it is 19.34 K and surely it does not start like any tia files because it is a ZIP file! Download winzip By now, if you did not backup your original flash from damaged phone, you phone is 100% useless. You can only use it for calculator and games because you flashed 00200000 to 00400000 which contains security checks that will tell the phone that the flash is not the original flash from the phone. In other words, the IMEI in the EEPROM and Cobba does not match the IMEI in the Flash. So even if you put Same Version, same manufacturer origin, and from same provider, your phone may power on, but only get network for 1-3 seconds or sometimes restarts. And also, why do you say you hate Germany??? I have friends there and I dont think they are happy when you make this invalid generalization of Germany [This message has been edited by X-Shadow (edited 12 January 2001).]

01-13-2001, 03:33	#13 (permalink)
bzegarac Temporary banned !! Join Date: Oct 2000 Location: Sky phone Posts: 24 Member: 2273 Status: Offline Thanks Meter: 0	I had the same problem as meshoz... 3210 v6 I flashed phone with flash from other D2 phone, and now it works normaly... regards, Boca

01-13-2001, 03:40	#14 (permalink)
MaRiN Freak Poster Join Date: Nov 2000 Location: Croatia Age: 47 Posts: 353 Member: 2466 Status: Offline Thanks Meter: 10	I am interesting in how many diferent language pack (and flash type) have N3210 v6.0?

01-13-2001, 10:56	#15 (permalink)
makona No Life Poster Join Date: Nov 2000 Location: EGYPT Age: 44 Posts: 1,202 Member: 2583 Status: Offline Sonork: 100.88702 Thanks Meter: 203	To X-Shadow : check what i got in usa.net as attachment : Look for 868 bytes boot.bin in the net, I will not send them to you... Ask from other people in the net Unknown/Unknown (19K) - so .. now when u told me i renamed it to .zip file and it worked . - about germany .. sure i don't hate germany and don't hate any country .. its a joke cuz the phones from germany have problems with dejan .. i didn't mean that and am sorry for that too .! To ALL : some ppl in my country add language using this flasher .. how they do that when i can't flash phone from 200-400 like x-shadow said .. !!! - my 3210 v6 still can't get network and i didn't get any backups from same phones . regards meshoz