3310 again - GSM-Forum

tolowo · 09-06-2004, 20:32

Hello guys,
I have this 3310 that whenever you put the battery the phone will start to vibrate,and once you press the power switch the phone will come on and the vibration will stop.If you off the phone for sometimes it will start to vibrate.I have change the ic that control the vibra.Yet no joy.Any help pls.

Cheers.

rajumobile · 09-07-2004, 08:50

Check the track from user control ic to vibra pad.

tolowo · 09-07-2004, 09:45

thanks guy,I have already done that,I think the only link between the ic and vibra pad is a resistor R39 which I replaced,any other idea or things to check

.

amal · 09-07-2004, 09:49

This has nothing 2 do with vibrator ic.Clean the board with acetone r ctc.then pwr on.If it did;nt work try flashing the phone.

ics_igrec_zet · 09-07-2004, 10:40

if after @amal solution phone do the same then change ccont

ahmed_s · 09-12-2004, 13:49

clean with alcohol, and dry with hair dyer...

::Yasir:: · 10-03-2004, 08:09

Quote:

Originally Posted by ahmed_s

clean with alcohol, and dry with hair dyer...

ARE you crazy???? Yo man check contacts on PCB. maybe short circuit somewhere..

09-06-2004, 20:32	#1 (permalink)
tolowo Freak Poster Join Date: Aug 2003 Location: PORT HARCOURT,NIGERIA. Age: 54 Posts: 142 Member: 36906 Status: Offline Thanks Meter: 1	3310 again Hello guys, I have this 3310 that whenever you put the battery the phone will start to vibrate,and once you press the power switch the phone will come on and the vibration will stop.If you off the phone for sometimes it will start to vibrate.I have change the ic that control the vibra.Yet no joy.Any help pls. Cheers.

09-07-2004, 09:45	#3 (permalink)
tolowo Freak Poster Join Date: Aug 2003 Location: PORT HARCOURT,NIGERIA. Age: 54 Posts: 142 Member: 36906 Status: Offline Thanks Meter: 1	3310 thanks guy,I have already done that,I think the only link between the ic and vibra pad is a resistor R39 which I replaced,any other idea or things to check .

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
again thanks setool team t280 hang repair with setool	kadricom	SETool2	1	04-03-2010 02:21
LG-KH1800 SHOW (KOREAN PHONE) UNLOCKED DONE AGAIN! PIC'S and PROCEDURE INSIDE	Ligalig	LG	1	03-30-2010 07:40
3310 Nonetwork Again and Again	NuengEve	Nokia Hardware & Hardware Repair	6	05-16-2005 15:49
TO MR. WILLY 3310 again	baraka42	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	10	11-27-2002 11:23

09-07-2004, 08:50	#2 (permalink)
rajumobile No Life Poster Join Date: Feb 2004 Age: 52 Posts: 593 Member: 54993 Status: Offline Thanks Meter: 47	Check the track from user control ic to vibra pad.

09-07-2004, 09:49	#4 (permalink)
amal Freak Poster Join Date: Mar 2004 Age: 71 Posts: 111 Member: 58466 Status: Offline Thanks Meter: 19	This has nothing 2 do with vibrator ic.Clean the board with acetone r ctc.then pwr on.If it did;nt work try flashing the phone.

09-07-2004, 10:40	#5 (permalink)
ics_igrec_zet No Life Poster Join Date: Feb 2004 Location: ROMANIA Age: 46 Posts: 861 Member: 55427 Status: Offline Thanks Meter: 7	if after @amal solution phone do the same then change ccont

09-12-2004, 13:49	#6 (permalink)
ahmed_s Freak Poster Join Date: Feb 2004 Location: mauritius Age: 38 Posts: 213 Member: 54469 Status: Offline Thanks Meter: 1	clean with alcohol, and dry with hair dyer...