3310 can flash but cant on - GSM-Forum

GOODNESS · 03-19-2005, 05:39

i got 3310 that i flash.it accept flash but cant on.help please

pazeth™ · 03-19-2005, 06:25

check power swicth on/off

freedomizer · 03-23-2005, 13:39

make sure you flashed mcu and ppm with same version.
after flash you have to do reset factory defaults and user settings and locks. otherwise the phone will not start as the new flash checkums need to be set.
If still no go, and it's a soft problem, then flash pmm and rebuild imei, then flash mcu and ppm and reset all settings, if still not starting then it's some hardware fault.
love,
freedomizer

reez · 03-27-2005, 11:17

change the MCU and PPm version

dizzu · 04-14-2005, 00:58

Flashing PMM after MCU and PPM will do the difference, if there is no hardware damage. :-)

**..::Neo::..** · 04-17-2005, 14:44

moved from dct-4 ...

robbyslam · 05-01-2005, 15:29

rehot flash ic...........

cellco_mann · 05-01-2005, 15:43

Flash with latest MCU and PPM files set will ok.

polmaster · 05-06-2005, 00:25

we advise u 2 change the flash IC .
bye

03-19-2005, 05:39	#1 (permalink)
GOODNESS Banned Join Date: Feb 2004 Location: Portharcourt,Nigeria Posts: 811 Member: 89584 Status: Offline Thanks Meter: 68	3310 can flash but cant on i got 3310 that i flash.it accept flash but cant on.help please

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
n-70 can charging but cant on !!	joecheun	Nokia Hardware & Hardware Repair	4	09-11-2007 06:26
3310 can flash but cannot power on	mt-boy	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	5	06-11-2007 05:31
3310 can flash but not power on?!	sergo_zmeia	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	04-27-2004 21:46
3310s can flash but dont power up	douda	Nokia Hardware & Hardware Repair	15	04-16-2003 09:59

03-19-2005, 06:25	#2 (permalink)
pazeth™ No Life Poster Join Date: Jul 2004 Location: BANDA ACEH INDONESIA Posts: 1,268 Member: 74519 Status: Offline Thanks Meter: 79	check power swicth on/off

03-23-2005, 13:39	#3 (permalink)
freedomizer No Life Poster Join Date: Mar 2005 Location: Sun12:\\Earth Age: 45 Posts: 529 Member: 123931 Status: Offline Thanks Meter: 0	make sure you flashed mcu and ppm with same version. after flash you have to do reset factory defaults and user settings and locks. otherwise the phone will not start as the new flash checkums need to be set. If still no go, and it's a soft problem, then flash pmm and rebuild imei, then flash mcu and ppm and reset all settings, if still not starting then it's some hardware fault. love, freedomizer

03-27-2005, 11:17	#4 (permalink)
reez Freak Poster Join Date: Jul 2004 Age: 45 Posts: 298 Member: 75424 Status: Offline Thanks Meter: 1	change the MCU and PPm version

04-14-2005, 00:58	#5 (permalink)
dizzu Freak Poster Join Date: Jun 2004 Age: 44 Posts: 178 Member: 69633 Status: Offline Thanks Meter: 2	Flashing PMM after MCU and PPM will do the difference, if there is no hardware damage. :-)

04-17-2005, 14:44	#6 (permalink)
..::Neo::.. Administrator Join Date: Jul 2002 Location: E G Y P T Age: 38 Posts: 3,213 Member: 14178 Status: Offline Thanks Meter: 8,858	moved from dct-4 ...

05-01-2005, 15:29	#7 (permalink)
robbyslam Freak Poster Join Date: Feb 2005 Location: central java Age: 47 Posts: 183 Member: 114921 Status: Offline Thanks Meter: 16	rehot flash ic...........

05-01-2005, 15:43	#8 (permalink)
cellco_mann Freak Poster Join Date: Aug 2004 Location: PUNJAB (INDIA) Age: 47 Posts: 263 Member: 78448 Status: Offline Thanks Meter: 17	Flash with latest MCU and PPM files set will ok.

05-06-2005, 00:25	#9 (permalink)
polmaster Junior Member Join Date: May 2005 Location: elmahalla elkobra Age: 44 Posts: 6 Member: 142956 Status: Offline Thanks Meter: 0	we advise u 2 change the flash IC . bye