3310 can't on with batt but can turn on with flasher - GSM-Forum

TokeiLampin · 05-23-2005, 14:30

Anyone has experience this b4 where that phone cannot turn on with battery power supply, but if using flasher like griffin or ufs, it can turn on.
I have check the swtich, it is ok. Any others suggestion?

watari31 · 05-25-2005, 06:46

Quote:

Originally Posted by TokeiLampin

Anyone has experience this b4 where that phone cannot turn on with battery power supply, but if using flasher like griffin or ufs, it can turn on.
I have check the swtich, it is ok. Any others suggestion?

i also exp.. that kind of trouble.. i only do is reheat the flash ic.... then come smoothly... its turning on... gud luck...

cora · 05-25-2005, 08:03

try to reball the flash ic coz sometimes cold solder happens....gud luck

vladmoto · 05-25-2005, 10:50

i had the same problem

arko · 05-25-2005, 16:27

maybe Try to change the diode v 202

TokeiLampin · 05-26-2005, 04:57

already change the flash ic and change v202 same condition there are a lot problem like this i cannot solve

anilgsm · 05-26-2005, 06:13

what does it says when the flashing is completed.there are only two ways.
1.open the cobba icand check.
2.u have to connect jumper in ccont.

watari31 · 05-26-2005, 08:31

Quote:

Originally Posted by TokeiLampin

already change the flash ic and change v202 same condition there are a lot problem like this i cannot solve

have u check all the v+ supply... all continuity is intact... do u already check the supply on the power IC.. or rather replaced the power IC...
gud luck really now a days... this kind of trouble are mutating... sometimes hard to solve... gud luck mate...

pupy_jai · 05-26-2005, 09:22

the full solution for can't on with batt but can turn on with box

for phone water damage or dead it self

1
1a, from r224 ,v414 ,r402 to on/off switch
1b, check the curcuit from cpuF2 to KeyUp ,KeyDown ,Key3 ,r414 ,v415
1c, ccont A4,D2,F1,G1,G3,G5,H6 to c228 curcuit damage

2 is for curcuit damage or i/c damage
2a, from batter supply BSI to r221,r220
2b, r221 to ccont C6
2c, r220 to ccont B3

dont miss check any 1
will help u 100% for start up the phone

TokeiLampin · 05-28-2005, 12:36

wow thanks ..really appriacate that.

05-23-2005, 14:30	#1 (permalink)
TokeiLampin Insane Poster Join Date: Apr 2005 Age: 41 Posts: 99 Member: 136206 Status: Offline Thanks Meter: 2	3310 can't on with batt but can turn on with flasher Anyone has experience this b4 where that phone cannot turn on with battery power supply, but if using flasher like griffin or ufs, it can turn on. I have check the swtich, it is ok. Any others suggestion?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
K500i can turn on but can't turn off	s1emens	Sony Ericsson Hardware Repair	0	09-08-2005 19:01
A52 can"t connect with Freya but can switch on	fabian	Siemens Hardware Repair Area	7	08-30-2005 12:58
3310/8250 can't on with batt but can turn on with flasher	TokeiLampin	Nokia Hardware & Hardware Repair	14	08-05-2005 06:00
8250 can't on with batt but can turn on with flasher	TokeiLampin	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	06-02-2005 01:08
3310 ,no problem in JIG, but dont turn on	.::AkhavanGSM::.	Nokia Hardware & Hardware Repair	5	03-05-2003 08:05

05-25-2005, 08:03	#3 (permalink)
cora Freak Poster Join Date: Feb 2005 Age: 46 Posts: 247 Member: 121368 Status: Offline Thanks Meter: 3	try to reball the flash ic coz sometimes cold solder happens....gud luck

05-25-2005, 10:50	#4 (permalink)
vladmoto Freak Poster Join Date: Nov 2003 Location: galati Age: 39 Posts: 159 Member: 44023 Status: Offline Thanks Meter: 0	i had the same problem

05-25-2005, 16:27	#5 (permalink)
arko Junior Member Join Date: May 2005 Age: 45 Posts: 3 Member: 147915 Status: Offline Thanks Meter: 0	maybe Try to change the diode v 202

05-26-2005, 04:57	#6 (permalink)
TokeiLampin Insane Poster Join Date: Apr 2005 Age: 41 Posts: 99 Member: 136206 Status: Offline Thanks Meter: 2	already change the flash ic and change v202 same condition there are a lot problem like this i cannot solve

05-26-2005, 06:13	#7 (permalink)
anilgsm Freak Poster Join Date: Mar 2004 Age: 45 Posts: 105 Member: 58181 Status: Offline Thanks Meter: 37	what does it says when the flashing is completed.there are only two ways. 1.open the cobba icand check. 2.u have to connect jumper in ccont.

05-26-2005, 09:22	#9 (permalink)
pupy_jai Freak Poster Join Date: Jun 2004 Location: KL Malaysia Age: 48 Posts: 107 Member: 68635 Status: Offline Thanks Meter: 0	the full solution for can't on with batt but can turn on with box for phone water damage or dead it self 1 1a, from r224 ,v414 ,r402 to on/off switch 1b, check the curcuit from cpuF2 to KeyUp ,KeyDown ,Key3 ,r414 ,v415 1c, ccont A4,D2,F1,G1,G3,G5,H6 to c228 curcuit damage 2 is for curcuit damage or i/c damage 2a, from batter supply BSI to r221,r220 2b, r221 to ccont C6 2c, r220 to ccont B3 dont miss check any 1 will help u 100% for start up the phone

05-28-2005, 12:36	#10 (permalink)
TokeiLampin Insane Poster Join Date: Apr 2005 Age: 41 Posts: 99 Member: 136206 Status: Offline Thanks Meter: 2	wow thanks ..really appriacate that.