3310 contact service - GSM-Forum

malkjos · 08-16-2004, 15:08

I have 2 3310 with same problem
when I tray to flash it the flash (200000-3d0000)
is ok but still contact service
but i can't write in 3d0000-400000
wats the problem
imei is ok
can't write another imei
and where is the eprom chip
tnx

eeprom_flash · 08-16-2004, 15:19

do a test with eep tool, if ur cause is software related then,full flash with this file using rollis flasher
take:

but if u get cobba serial test failed ....
change cobba on motherboard.
eeprom_flash

malkjos · 08-16-2004, 15:41

eprom data is in cobba or in flash chip?

eeprom_flash · 08-16-2004, 15:41

take here : http://groups.yahoo.com/group/jmobilegsm/files/nokia
check in dct3 tested flashes
eeorom_flash

eeprom_flash · 08-16-2004, 15:51

Quote:

Originally Posted by malkjos

eprom data is in cobba or in flash chip?

eeprom data not in cobba not possible, i said flash first before u mess arround eeprom huh!
rewwrite first before u mess around..hardware

malkjos · 08-16-2004, 15:56

still can't write in eerpon block after 3d0000

diablos · 08-16-2004, 15:59

find full flash 20-40 and write.

eeprom_flash · 08-16-2004, 16:29

@ malkjos it seems u have undesrtanding probs..
all u need do is full flash the fone...
use rollis flasher only with tested flash file on groups http://groups.yahoo.com/group/jmobilegsm/files/nokia
if this would not do good luck!

malkjos · 08-16-2004, 16:30

can't erase after 3d0000
when i open full flash i get error mesage in erase flash
when i open mcu + ppm is ok
in eprom is the problem

diablos · 08-16-2004, 18:46

use geoflash to flash

eeprom_flash · 08-17-2004, 11:58

ok i see malkjos use knok to erase full flash make sure it's empty from 20000-40000
and rewirte new fresh flash phone will work.. where are u? country?

ayyazi · 08-17-2004, 17:07

I've 3310, whenever I try to write flash, During Registration its retun me the following error
M-Bus Error
1F00 10 40 00 04 00
01 64 01 01 2E
BAD BOB ACK
any bosy can tel lme how I can fix it.
ayyazi

Shabaracandi · 08-19-2004, 23:00

For flashing(full flash) use Rolis4.77 and "Kaljevic"1.00 for imei

abbeydguru · 08-20-2004, 12:44

i think geoflash is a bit effective.

ahmed_s · 09-12-2004, 14:25

thanks for the link eeprom flash,
it is very interesting and holds a lot of good stuff

08-16-2004, 15:08	#1 (permalink)
malkjos Freak Poster Join Date: Jun 2002 Age: 45 Posts: 294 Member: 13373 Status: Offline Thanks Meter: 5	3310 contact service I have 2 3310 with same problem when I tray to flash it the flash (200000-3d0000) is ok but still contact service but i can't write in 3d0000-400000 wats the problem imei is ok can't write another imei and where is the eprom chip tnx

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
3310 Contact Service ( S T R A N G E ) !!	makona	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	5	11-25-2001 18:27
3310 Contact Service (Donble blinking) not-repairable !!!	makona	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	5	11-09-2001 06:09
3310 contact service insert sim/contact i tried ...	makona	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	08-11-2001 04:38
SUCCESS in Repairing 3310 Contact Service (Double-blink) using NFREE by ViperBJK	ed2k_7	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	24	07-08-2001 16:00
3310 contact service repair?	emix	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	06-04-2001 21:47

08-16-2004, 15:19	#2 (permalink)
eeprom_flash Freak Poster Join Date: Mar 2004 Location: Neptune Age: 22 Posts: 480 Member: 58599 Status: Offline Thanks Meter: 2	do a test with eep tool, if ur cause is software related then,full flash with this file using rollis flasher take: but if u get cobba serial test failed .... change cobba on motherboard. eeprom_flash

08-16-2004, 15:41	#3 (permalink)
malkjos Freak Poster Join Date: Jun 2002 Age: 45 Posts: 294 Member: 13373 Status: Offline Thanks Meter: 5	eprom data is in cobba or in flash chip?

08-16-2004, 15:41	#4 (permalink)
eeprom_flash Freak Poster Join Date: Mar 2004 Location: Neptune Age: 22 Posts: 480 Member: 58599 Status: Offline Thanks Meter: 2	take here : http://groups.yahoo.com/group/jmobilegsm/files/nokia check in dct3 tested flashes eeorom_flash

08-16-2004, 15:56	#6 (permalink)
malkjos Freak Poster Join Date: Jun 2002 Age: 45 Posts: 294 Member: 13373 Status: Offline Thanks Meter: 5	still can't write in eerpon block after 3d0000

08-16-2004, 15:59	#7 (permalink)
diablos Freak Poster Join Date: May 2002 Location: Warsaw,Poland Age: 42 Posts: 144 Member: 11886 Status: Offline Thanks Meter: 0	find full flash 20-40 and write.

08-16-2004, 16:29	#8 (permalink)
eeprom_flash Freak Poster Join Date: Mar 2004 Location: Neptune Age: 22 Posts: 480 Member: 58599 Status: Offline Thanks Meter: 2	@ malkjos it seems u have undesrtanding probs.. all u need do is full flash the fone... use rollis flasher only with tested flash file on groups http://groups.yahoo.com/group/jmobilegsm/files/nokia if this would not do good luck!

08-16-2004, 16:30	#9 (permalink)
malkjos Freak Poster Join Date: Jun 2002 Age: 45 Posts: 294 Member: 13373 Status: Offline Thanks Meter: 5	can't erase after 3d0000 when i open full flash i get error mesage in erase flash when i open mcu + ppm is ok in eprom is the problem

08-16-2004, 18:46	#10 (permalink)
diablos Freak Poster Join Date: May 2002 Location: Warsaw,Poland Age: 42 Posts: 144 Member: 11886 Status: Offline Thanks Meter: 0	use geoflash to flash

08-17-2004, 11:58	#11 (permalink)
eeprom_flash Freak Poster Join Date: Mar 2004 Location: Neptune Age: 22 Posts: 480 Member: 58599 Status: Offline Thanks Meter: 2	ok i see malkjos use knok to erase full flash make sure it's empty from 20000-40000 and rewirte new fresh flash phone will work.. where are u? country?

08-17-2004, 17:07	#12 (permalink)
ayyazi Junior Member Join Date: Aug 2004 Location: Rawalpindi / Pakistan Age: 48 Posts: 34 Member: 77586 Status: Offline Thanks Meter: 0	I've 3310, whenever I try to write flash, During Registration its retun me the following error M-Bus Error 1F00 10 40 00 04 00 01 64 01 01 2E BAD BOB ACK any bosy can tel lme how I can fix it. ayyazi

08-19-2004, 23:00	#13 (permalink)
Shabaracandi Insane Poster Join Date: Apr 2004 Age: 52 Posts: 93 Member: 63131 Status: Offline Thanks Meter: 4	For flashing(full flash) use Rolis4.77 and "Kaljevic"1.00 for imei

08-20-2004, 12:44	#14 (permalink)
abbeydguru Cheater -Don't Deal with him- Join Date: Mar 2003 Location: ITALY Posts: 1,124 Member: 23994 Status: Offline Thanks Meter: 43	i think geoflash is a bit effective.

09-12-2004, 14:25	#15 (permalink)
ahmed_s Freak Poster Join Date: Feb 2004 Location: mauritius Age: 38 Posts: 213 Member: 54469 Status: Offline Thanks Meter: 1	thanks for the link eeprom flash, it is very interesting and holds a lot of good stuff