3310 dead by water damage - GSM-Forum

moussi33 · 09-22-2005, 09:40

i have 3310 dead by water , there are any solution????

tega · 09-22-2005, 09:53

Try this step hope to solve your dead phone,sevice phone with utrasonic bath and dry bud or panel very well,couple the phone and power on, if no power then flash phone with software, i recommand you to flash with JAF box first, second with Griffin, Twister may not do it,
Thanks post reply

bestman · 09-27-2005, 11:53

you can check for my old post on water damage. or check thread sections for remedies on this application problem.

bestman

kage · 09-28-2005, 20:18

if you don'd have an utrasonic bath, take the tin covers off the main board and put in a bath of white spirit. Scrub with a clean toothbrush. Leave for 20 minutes. Scrub again and take out. Leave to dry or use a hairdryer.

Sometimes works.

Tulga · 10-03-2005, 18:38

1 check v+ ways
2 remove PA, Chaps, cobba and n400 then phone doesn't power on check ccont and flash ic.

09-22-2005, 09:40	#1 (permalink)
moussi33 Junior Member Join Date: Jul 2005 Age: 46 Posts: 2 Member: 161736 Status: Offline Thanks Meter: 0	3310 dead by water damage i have 3310 dead by water , there are any solution????

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
6230i dead after water damage	Mobiliuksas	Nokia Hardware & Hardware Repair	22	06-18-2010 07:48
3310/8210/8250 water damage can't switch on but	dragories	Nokia Hardware & Hardware Repair	22	01-05-2006 12:19
Samsung X460 dead after water damage	duha2	Samsung Hardware Repair	3	08-16-2005 08:38
6610 dead because water damage	ARTIC	Nokia Hardware & Hardware Repair	2	05-24-2005 05:13
dead 3310 due to water damage	Black-Axe	Nokia Hardware & Hardware Repair	1	02-04-2003 11:47

09-22-2005, 09:53	#2 (permalink)
tega Freak Poster Join Date: Apr 2005 Age: 51 Posts: 266 Member: 141054 Status: Offline Thanks Meter: 1	Try this step hope to solve your dead phone,sevice phone with utrasonic bath and dry bud or panel very well,couple the phone and power on, if no power then flash phone with software, i recommand you to flash with JAF box first, second with Griffin, Twister may not do it, Thanks post reply

09-27-2005, 11:53	#3 (permalink)
bestman No Life Poster Join Date: Apr 2004 Age: 49 Posts: 1,271 Member: 61294 Status: Offline Thanks Meter: 49	you can check for my old post on water damage. or check thread sections for remedies on this application problem. bestman

09-28-2005, 20:18	#4 (permalink)
kage Freak Poster Join Date: Nov 2001 Location: UK Age: 79 Posts: 312 Member: 7314 Status: Offline Thanks Meter: 11	if you don'd have an utrasonic bath, take the tin covers off the main board and put in a bath of white spirit. Scrub with a clean toothbrush. Leave for 20 minutes. Scrub again and take out. Leave to dry or use a hairdryer. Sometimes works.

10-03-2005, 18:38	#5 (permalink)
Tulga Freak Poster Join Date: Apr 2004 Age: 43 Posts: 111 Member: 64002 Status: Offline Thanks Meter: 11	1 check v+ ways 2 remove PA, Chaps, cobba and n400 then phone doesn't power on check ccont and flash ic.