3310 No Network Only "00 000" - GSM-Forum

jamohaki · 04-07-2007, 11:51

I have 3310 with no network when I make factory reset I got “00 000” I change ,ccont,cobba,hagar 26mhz, crystal,fullflash phone, write, ppm but same massage appear when make factory reset and still no network any body know how to repair this problem?

Pulax · 04-07-2007, 11:58

m8t you should have check first the switch module....then the hagar...
...

jamohaki · 04-07-2007, 12:02

thanks for the quick reply but what is switch module and for the hagar i have already changed still problem is the same

Pulax · 04-07-2007, 12:10

Quote:

Originally Posted by jamohaki

thanks for the quick reply but what is switch module and for the hagar i have already changed still problem is the same

switch module...located at the upper case beside the PA usually silver ..16 leg spider modulator

+1.2.2patch+ · 04-08-2007, 03:27

hi mates! much better to use net monitor or wintesla to troubleshoot your signal problem..

WBR,

jamohaki · 04-12-2007, 05:24

i have also try to bridge ant switch but problem remains maybe problem is in flash ic.

care · 04-12-2007, 07:32

just change the cobba ic

devia · 04-12-2007, 09:40

what is the coba ic. cud u send the position on a nokia shematics

NewJack · 04-24-2007, 00:46

Hey

If all that doesn't work it means there is a broken track somewhere !

Is your phone water damaged ?

Regards
Jack

fren128 · 04-26-2007, 12:02

This is 100% Flash IC problem.Replaced it a brand new or good IC from same board model,depend upon to your technique or availability.Flash it a healthy flash file.Update faid,return original IMEI,SFR and CONFIG.Read Info once again.

ENJOY hope it will help.

P.S.: Be careful in replacing the flash IC,please don't touch the RAM coz you might experience difficulty in powering on the unit like what i experienced before i concluded that this is 100% flash IC problem...

Gretz
Efren "BATA" Reyles

Allunlockingsource · 04-27-2007, 10:19

Change Hagar ic .....................

sakha · 05-24-2007, 13:42

I need pmm files of 3310, 2100,
anybody help me plz.

Buttsb · 05-24-2007, 13:50

yes try fren128 procedure
and post results

Formingus · 06-16-2007, 18:02

Quote:

Originally Posted by sakha

I need pmm files of 3310, 2100,
anybody help me plz.

littel late but beeter late then never

04-07-2007, 11:51	#1 (permalink)
jamohaki No Life Poster Join Date: Sep 2004 Location: coast Age: 53 Posts: 2,097 Member: 83397 Status: Offline Thanks Meter: 204	3310 No Network Only "00 000" I have 3310 with no network when I make factory reset I got “00 000” I change ,ccont,cobba,hagar 26mhz, crystal,fullflash phone, write, ppm but same massage appear when make factory reset and still no network any body know how to repair this problem?

04-26-2007, 12:02	#10 (permalink)
fren128 Junior Member Join Date: Apr 2007 Location: Malolos,Makati,Philippines Posts: 17 Member: 483434 Status: Offline Thanks Meter: 0	3310 No NETWORK 000 00 Appear on Display upon Restored Settings This is 100% Flash IC problem.Replaced it a brand new or good IC from same board model,depend upon to your technique or availability.Flash it a healthy flash file.Update faid,return original IMEI,SFR and CONFIG.Read Info once again. ENJOY hope it will help. P.S.: Be careful in replacing the flash IC,please don't touch the RAM coz you might experience difficulty in powering on the unit like what i experienced before i concluded that this is 100% flash IC problem... Gretz Efren "BATA" Reyles

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
3310 no network,no signal	xyzjojo	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	14	11-14-2013 04:27
3310 DAED AND 3310 NO NETWORK	ezz2003	Nokia Hardware & Hardware Repair	9	06-16-2007 18:03
3310 no network tried changing PA and ext ant connector...please help	sidharthaharish	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	02-23-2002 13:34
3310 NO Network	miga	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	12-10-2001 13:57
3310 no ringer only vibrates	jinn	Nokia Hardware & Hardware Repair	9	11-23-2001 09:01

04-07-2007, 11:58	#2 (permalink)
Pulax Freak Poster Join Date: Mar 2007 Location: Ryt Here...Phil Age: 39 Posts: 154 Member: 463891 Status: Offline Thanks Meter: 2	m8t you should have check first the switch module....then the hagar... ...

04-07-2007, 12:02	#3 (permalink)
jamohaki No Life Poster Join Date: Sep 2004 Location: coast Age: 53 Posts: 2,097 Member: 83397 Status: Offline Thanks Meter: 204	thanks for the quick reply but what is switch module and for the hagar i have already changed still problem is the same

04-08-2007, 03:27	#5 (permalink)
+1.2.2patch+ Insane Poster Join Date: Nov 2006 Location: death valley Age: 37 Posts: 93 Member: 401090 Status: Offline Thanks Meter: 4	hi mates! much better to use net monitor or wintesla to troubleshoot your signal problem.. WBR,

04-12-2007, 05:24	#6 (permalink)
jamohaki No Life Poster Join Date: Sep 2004 Location: coast Age: 53 Posts: 2,097 Member: 83397 Status: Offline Thanks Meter: 204	i have also try to bridge ant switch but problem remains maybe problem is in flash ic.

04-12-2007, 07:32	#7 (permalink)
care Freak Poster Join Date: Jan 2005 Location: india Age: 44 Posts: 456 Member: 110487 Status: Offline Thanks Meter: 52	just change the cobba ic

04-12-2007, 09:40	#8 (permalink)
devia Junior Member Join Date: Jun 2006 Location: Abuja Age: 45 Posts: 13 Member: 286794 Status: Offline Thanks Meter: 1	what is the coba ic. cud u send the position on a nokia shematics

04-24-2007, 00:46	#9 (permalink)
NewJack Freak Poster Join Date: Mar 2007 Posts: 262 Member: 461058 Status: Offline Thanks Meter: 8	Hey If all that doesn't work it means there is a broken track somewhere ! Is your phone water damaged ? Regards Jack

04-27-2007, 10:19	#11 (permalink)
Allunlockingsource No Life Poster Join Date: Aug 2006 Location: SPAIN-----UK Posts: 2,037 Member: 333439 Status: Offline Sonork: 100.1589101 Thanks Meter: 623	Change Hagar ic .....................

05-24-2007, 13:42	#12 (permalink)
sakha Junior Member Join Date: Jun 2006 Posts: 17 Member: 289974 Status: Offline Thanks Meter: 0	I need pmm files of 3310, 2100, anybody help me plz.

05-24-2007, 13:50	#13 (permalink)
Buttsb Freak Poster Join Date: Nov 2005 Location: KSA Posts: 304 Member: 201126 Status: Offline Thanks Meter: 1	yes try fren128 procedure and post results