3310 no sound
 

i have a 3310 keypad tones work on it but when the ringtones are turned up even to level 5 the fone will vibrate but no ringtone can be heard, and no it aint still on silent! i aint that thick!<br />chrz

I got this problem on a water damaged 3310 I have been given to repair. I am about to search through old posts to try and find the answer.

Try resetting to factory original settings, has worked several times for me.

if it was water damage try to clean the mainboard...

Ok I have found solution you need to open the phone and solder a wire from pin 6 on to 20 pin chip at the bottom of the phone to the buzzer however I can't find the buzzer if someone can help me on this one.

hi bro!

to find the buzzer first look at board and below the 20 pins i.c. you'll find the buxxer interface.it's like a 2 rectangular shape placed horizontally below the 20 pins i.c.

hope this will help you guys!!!!

<br />best regards to all.........

----------------------------

<br />kick butt first,<br />take names later <img src="biggrin.gif" border="0"> <img src="biggrin.gif" border="0"> <img src="biggrin.gif" border="0">

Hi G-man, Markie is right. Jumper from pin 6 to buzzer pad, and not buzzer. There are two buzzer pads, as I recall the upper jumper pad is connected to pin 6 of interface IC.

i had the problem aswell guys got water in my 3310 lost the sound and a couple of LEDs in my phone. couldnt do much bout da lights but i got the sound back didnt have to reset anything or ****** about with the PINs its woz simple all i did woz put it in a warm place over nite set the alarm and after many beeps the sound came back try it!