3330 to 3310, it is possible - GSM-Forum

stoker · 01-01-2004, 13:29

Thanks

Rise · 01-01-2004, 13:54

Hi

Listen 3330 have 4mb size and 3310 have 2mb size
so u suggest that is this file r working

Regard
rise

b0ba · 01-01-2004, 15:36

@stoker:
Possible with changing flash IC.

Surej · 01-01-2004, 16:31

@stoker
Possible... read any working 3310 in rollis with the setting as 3330 so you'll get a 4 mb flash..Flash that full flash file to 3330 and set faid...

WBR

Surej

ada0611 · 01-01-2004, 19:57

yes you can, flash with ppm + mcu +eprom and 4-6 mcu + ppm + eprom again, so full flas 2x! Tested!

**sebagsm** · 01-02-2004, 03:42

Change flash and ram after that write full flash from 3330 thats all

gsmsalers · 01-02-2004, 04:20

Just double 3310flash. Then flash.

***acyl2000*** · 01-02-2004, 04:36

no need to change any ic....if you need the flash file just sent a mail to me

stoker · 01-02-2004, 10:04

I have flashed with one fullflash NHM-6 the 3330 and now it does not power on and I cannot flasher it.

The Knok says:
FLS1_ConfigurateBootstrapDCT3 : checksum is 4A8B
FLE5_DirectInitialiseBootstrapDCT3 : Press power on (if needed)
FLS1_GeneralSendBootstrapDCT3 : bootstrap seems to be running
FLS1_PreparePhone : detected NMP is (c) LMP.
FLS1_PreparePhone : not supported NMP - (c) LMP.
Cannot prepare phone

Rolis 4.71 says:
Unknown flash type. Flash ID : 00898894
SoftWare & HW : V 04.50.10-10-01.LHM-4.(c) LMP.
Flash ID : 00898894,Intel 28F400B3-T, size 4Mb

help me plz

thanks to acyl2000 and all the others

PD: sorry for my bad english

**sebagsm** · 01-02-2004, 10:23

YOU MUST CHANGE THE FLASH AND THE RAM INSIDE YOUR PHONE !!! AFTER THAT FULL FLASH IT WITH 3330 !!!

mudboy · 01-03-2004, 22:21

3330>3310 : just flash it as gsmsalers said.
3310>3330 : impossible without HW change

usernome · 01-08-2004, 03:04

You have to flash a 3310 dump twice . Once from 200000 and once from 400000 with the settings from 3330 .

ejvital · 01-09-2004, 17:16

yes you can just flash it to rolis

flash file get it here
www.handy-flashpage****

skynet · 02-03-2004, 21:30

no big deal just flash the 3310 (2MB) file to the 3330 twice, once beginning with 200000 (hex) then 400000 (hex) with any flasher

01-01-2004, 13:29	#1 (permalink)
stoker Junior Member Join Date: Feb 2003 Posts: 28 Member: 22700 Status: Offline Thanks Meter: 0	3330 to 3310, it is possible Thanks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
6301 to 630 it is possible?	rudyandremely	Nokia Base Band 5 ( BB-5 )	1	10-10-2008 20:41
LG U8150 Hang it is possible to repair it	nzeiga	VygisToolbox	1	05-10-2008 00:20
It is possible to convert it 1112 to 1208?	crazyman	Nokia Digital Core Technology 4 ( DCT-4 )	2	03-30-2008 18:00
3330 to 3310 it is posible?	asas	Nokia Hardware & Hardware Repair	4	10-21-2003 20:58

01-01-2004, 13:54	#2 (permalink)
Rise No Life Poster Join Date: Sep 2003 Location: Dubai Posts: 1,402 Member: 39022 Status: Offline Sonork: 1575244 Thanks Meter: 94	Hi Listen 3330 have 4mb size and 3310 have 2mb size so u suggest that is this file r working Regard rise

01-01-2004, 15:36	#3 (permalink)
b0ba No Life Poster Join Date: Oct 2001 Location: No route to host. Age: 43 Posts: 895 Member: 6772 Status: Offline Thanks Meter: 17	@stoker: Possible with changing flash IC.

01-01-2004, 16:31	#4 (permalink)
Surej No Life Poster Join Date: May 2002 Location: Wolverhampton UK Age: 54 Posts: 790 Member: 12296 Status: Offline Thanks Meter: 9	@stoker Possible... read any working 3310 in rollis with the setting as 3330 so you'll get a 4 mb flash..Flash that full flash file to 3330 and set faid... WBR Surej

01-01-2004, 19:57	#5 (permalink)
ada0611 No Life Poster Join Date: Feb 2002 Age: 39 Posts: 710 Member: 21572 Status: Offline Thanks Meter: 1	yes you can, flash with ppm + mcu +eprom and 4-6 mcu + ppm + eprom again, so full flas 2x! Tested!

01-02-2004, 03:42	#6 (permalink)
sebagsm Moderator Join Date: Sep 2002 Location: Serbia/Hungary Age: 42 Posts: 1,043 Member: 15994 Status: Offline Thanks Meter: 263	Change flash and ram after that write full flash from 3330 thats all

01-02-2004, 04:20	#7 (permalink)
gsmsalers No Life Poster Join Date: Apr 2002 Location: Flash Age: 44 Posts: 1,943 Member: 11208 Status: Offline Thanks Meter: 11	Just double 3310flash. Then flash.

01-02-2004, 04:36	#8 (permalink)
*acyl2000* Super Moderator Join Date: Aug 2000 Location: Malaysia Posts: 2,809 Member: 1922 Status: Offline Sonork: 100.64645 Thanks Meter: 692	no need to change any ic....if you need the flash file just sent a mail to me

01-02-2004, 10:04	#9 (permalink)
stoker Junior Member Join Date: Feb 2003 Posts: 28 Member: 22700 Status: Offline Thanks Meter: 0	I have flashed with one fullflash NHM-6 the 3330 and now it does not power on and I cannot flasher it. The Knok says: FLS1_ConfigurateBootstrapDCT3 : checksum is 4A8B FLE5_DirectInitialiseBootstrapDCT3 : Press power on (if needed) FLS1_GeneralSendBootstrapDCT3 : bootstrap seems to be running FLS1_PreparePhone : detected NMP is (c) LMP. FLS1_PreparePhone : not supported NMP - (c) LMP. Cannot prepare phone Rolis 4.71 says: Unknown flash type. Flash ID : 00898894 SoftWare & HW : V 04.50.10-10-01.LHM-4.(c) LMP. Flash ID : 00898894,Intel 28F400B3-T, size 4Mb help me plz thanks to acyl2000 and all the others PD: sorry for my bad english

01-02-2004, 10:23	#10 (permalink)
sebagsm Moderator Join Date: Sep 2002 Location: Serbia/Hungary Age: 42 Posts: 1,043 Member: 15994 Status: Offline Thanks Meter: 263	YOU MUST CHANGE THE FLASH AND THE RAM INSIDE YOUR PHONE !!! AFTER THAT FULL FLASH IT WITH 3330 !!!

01-03-2004, 22:21	#11 (permalink)
mudboy No Life Poster Join Date: Apr 2001 Location: Czech Republic Posts: 1,059 Member: 4246 Status: Offline Thanks Meter: 9	3330>3310 : just flash it as gsmsalers said. 3310>3330 : impossible without HW change

01-08-2004, 03:04	#12 (permalink)
usernome No Life Poster Join Date: Jan 2003 Location: Iassy Age: 59 Posts: 4,314 Member: 19723 Status: Offline Thanks Meter: 359	You have to flash a 3310 dump twice . Once from 200000 and once from 400000 with the settings from 3330 .

01-09-2004, 17:16	#13 (permalink)
ejvital Junior Member Join Date: Jan 2004 Age: 47 Posts: 39 Member: 48489 Status: Offline Thanks Meter: 2	yes you can just flash it to rolis flash file get it here www.handy-flashpage****

02-03-2004, 21:30	#14 (permalink)
skynet Insane Poster Join Date: Apr 2002 Location: Planet Earth Age: 44 Posts: 79 Member: 10630 Status: Offline Thanks Meter: 1	no big deal just flash the 3310 (2MB) file to the 3330 twice, once beginning with 200000 (hex) then 400000 (hex) with any flasher