5210 dead, FUBU doesn't work, plz help ... - GSM-Forum

speedrush · 10-26-2004, 17:31

Hello 2 @ll!

I have (actually "had") an 5210 v20, which I wanted to update to 5.40
-> after flash, phone doesn't turn on! I tried after that with mcu and ppm v22, also didn't work! After that, I flashed back the FUBU I made ->> after flashing, the phone still doesn't turn on!! FUBU of an other 5210 also doesn't work! what happaned? I've never seen something like this before! I can flash and read the phone, but I can't turn it on! Programm is Rolis flasher 4.78, it worked fine for me under XP.
I activated at Userport all 3 things, is that ok?
thanks in advance, please help!

greetz, speedrush!

speedrush · 10-26-2004, 19:38

got the mistake:
use knok instead of rolis

Skiller_1 · 10-26-2004, 20:15

use geoflasher.rolis damage 5210

Rise · 11-11-2004, 13:06

Dear
i have 5210 which is dead through rolis
so now i try to flash with geo and knok but it can't flash
so how i revive this set

Regard
Rise

eivoig · 11-28-2004, 16:44

chech your flashram IC if it is still ok if change it and flash agin.ok.\

eivoig · 11-28-2004, 16:45

I have a 5210 here I change the flash Ic flashing is ok and complete but canot power on anybody can help me?advise me what should i do about this.

ANUCHOPRA · 11-28-2004, 17:54

HI,
@eivoig
FLASH IC OF 3610 OR 8250 WILL WORK IN 5210 . DONT TRY USING SHARP FLASHES OR 2100 FLASH IC IN 5210, COZ THE SET CAN FLASH BUT NOT POWER ON.
WBR,
ANUCHOPRA.

10-26-2004, 17:31	#1 (permalink)
speedrush Junior Member Join Date: Mar 2004 Posts: 9 Member: 58209 Status: Offline Thanks Meter: 0	5210 dead, FUBU doesn't work, plz help ... Hello 2 @ll! I have (actually "had") an 5210 v20, which I wanted to update to 5.40 -> after flash, phone doesn't turn on! I tried after that with mcu and ppm v22, also didn't work! After that, I flashed back the FUBU I made ->> after flashing, the phone still doesn't turn on!! FUBU of an other 5210 also doesn't work! what happaned? I've never seen something like this before! I can flash and read the phone, but I can't turn it on! Programm is Rolis flasher 4.78, it worked fine for me under XP. I activated at Userport all 3 things, is that ok? thanks in advance, please help! greetz, speedrush!

11-28-2004, 16:45	#6 (permalink)
eivoig No Life Poster Join Date: Jul 2001 Location: Spinning on my OWN Orbit Posts: 968 Member: 5358 Status: Offline Thanks Meter: 211	I have a 5210 here I change the flash Ic flashing is ok and complete but canot power on anybody can help me?advise me what should i do about this. Last edited by eivoig; 11-28-2004 at 16:46. Reason: wrong poit

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nokia 6600 - display backlight doesn't work - please help!	Vitamin_G	Nokia Hardware & Hardware Repair	11	12-14-2006 08:52
Nokia 6230 Camera Doesn't Work - Please Help	kabokaa	Nokia Digital Core Technology 4 ( DCT-4 )	6	09-14-2006 09:51
5510 down key pad not working plz help	mohammed	Nokia Hardware & Hardware Repair	3	04-07-2005 21:04
mc60 camera not work plz help	DeDo Gsm1911	E-Gold Based Phones	4	06-16-2004 14:11
XSim not working... PLZ help	nonu_don	Sim Cloning and Scaning	1	05-03-2003 22:05

10-26-2004, 19:38	#2 (permalink)
speedrush Junior Member Join Date: Mar 2004 Posts: 9 Member: 58209 Status: Offline Thanks Meter: 0	got the mistake: use knok instead of rolis

10-26-2004, 20:15	#3 (permalink)
Skiller_1 Freak Poster Join Date: Jun 2003 Location: Bulgaria Age: 40 Posts: 223 Member: 31997 Status: Offline Thanks Meter: 28	use geoflasher.rolis damage 5210

11-11-2004, 13:06	#4 (permalink)
Rise No Life Poster Join Date: Sep 2003 Location: Dubai Posts: 1,402 Member: 39022 Status: Offline Sonork: 1575244 Thanks Meter: 94	Dear i have 5210 which is dead through rolis so now i try to flash with geo and knok but it can't flash so how i revive this set Regard Rise

11-28-2004, 16:44	#5 (permalink)
eivoig No Life Poster Join Date: Jul 2001 Location: Spinning on my OWN Orbit Posts: 968 Member: 5358 Status: Offline Thanks Meter: 211	chech your flashram IC if it is still ok if change it and flash agin.ok.\

11-28-2004, 17:54	#7 (permalink)
ANUCHOPRA Freak Poster Join Date: Jul 2004 Location: WHERE INDIAN MEETS THE PACIFIC Age: 45 Posts: 138 Member: 73815 Status: Offline Thanks Meter: 4	HI, @eivoig FLASH IC OF 3610 OR 8250 WILL WORK IN 5210 . DONT TRY USING SHARP FLASHES OR 2100 FLASH IC IN 5210, COZ THE SET CAN FLASH BUT NOT POWER ON. WBR, ANUCHOPRA.