5210 flash - GSM-Forum

mix00 · 01-01-2003, 17:23

5210 displays contact service
the imei of phone has change to 00000000000
i try to change imei to original one with many softwares but i cant
i try to full flash the phone but i dont know the size
of flash file and the end address

daytona · 01-01-2003, 17:43

Hi mix00,
If you read the phone using Nk_Calc, you might find that the Product Code has gone 00000...... or 12345......or some thing to that effect. Basically, the product code is corrupted, and that's why you can't change the imei. In this case, copy a good flash from a working phone using Knok Phoenix from 00200000 to 00600000 and reflash that into the faulty phone, also using Knok Phoenix. You will now have a working phone and then you can try changing the imei to whatever you want. It has happen to me several times and they were all solved using this method. Give it a try.

WBR

ALFbcn2000 · 01-15-2003, 00:20

Hi

I have a 5210 with a little problem. When i put numbers, i can not clear the last digit, but i can clear all the digits by long long press clear key only.
I thinked that there was a bug or a damaged flash and i tried to flash it with Rolis 4,77. First i have maked a backup (200-600) with rolis (3330 configuration). I have tried to upgrade but phone dont switch on. I have tried to flash with backup but the same.

Any help?

Thanks in advanced.

AlfBcn

01-01-2003, 17:23	#1 (permalink)
mix00 Freak Poster Join Date: May 2002 Location: greece Posts: 181 Member: 12417 Status: Offline Thanks Meter: 0	5210 flash 5210 displays contact service the imei of phone has change to 00000000000 i try to change imei to original one with many softwares but i cant i try to full flash the phone but i dont know the size of flash file and the end address

01-15-2003, 00:20	#3 (permalink)
ALFbcn2000 Freak Poster Join Date: Jun 2002 Location: BCN Spain Age: 59 Posts: 127 Member: 13300 Status: Offline Thanks Meter: 1	Problems flashing 5210 Hi I have a 5210 with a little problem. When i put numbers, i can not clear the last digit, but i can clear all the digits by long long press clear key only. I thinked that there was a bug or a damaged flash and i tried to flash it with Rolis 4,77. First i have maked a backup (200-600) with rolis (3330 configuration). I have tried to upgrade but phone dont switch on. I have tried to flash with backup but the same. Any help? Thanks in advanced. AlfBcn

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
here is the 5210 flash with t9 arabic	lord-of-darknes	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	04-18-2002 20:47
Nokia 5210 Flashing HELP!!	kingbode	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	04-11-2002 22:07
Definitive answers for 5210 flashing?	Nick-A	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	04-05-2002 10:14
5210 flash or PPM version 5.12	zDEnaL	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	03-18-2002 20:56
5210 flashing problems	Eerchant	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	21	03-05-2002 23:54

01-01-2003, 17:43	#2 (permalink)
daytona Freak Poster Join Date: Jul 2001 Location: Malaysia Posts: 252 Member: 5381 Status: Offline Thanks Meter: 0	Hi mix00, If you read the phone using Nk_Calc, you might find that the Product Code has gone 00000...... or 12345......or some thing to that effect. Basically, the product code is corrupted, and that's why you can't change the imei. In this case, copy a good flash from a working phone using Knok Phoenix from 00200000 to 00600000 and reflash that into the faulty phone, also using Knok Phoenix. You will now have a working phone and then you can try changing the imei to whatever you want. It has happen to me several times and they were all solved using this method. Give it a try. WBR