5210 problem??? take a look here!!!!! - GSM-Forum

vule · 05-02-2002, 16:55

I have tried recently to upgrade 5210 V5.12 to V5.16 to add language pack and i have killed phone!!!! I tried to do that with unlockking dct3 flasher ( small black box with red and green led on it ). Result was dead phone even if i did more than 1.000 nokias all models with that box.

And i was speaking with my friends who had same problem with Neelix box ( working with wintesla files just like my box) and with box of gsmunlock i think.

When u flash phone with it soft in box just cuts out first 36 bytes from MCU soft so last programming address is 36 bytes less than normal....

Just use normal dejan flasher and KNOK22 to flash phone then use your box to calculate cheksums ( or u can use any other tool like ).

The other solution is to modify .ini file for Your box...Open it in notepad, look for 5210 model description and change flash size to #35 (hex)...

If you have any problems mail me. I also have working eeprom of 5210

Best regards, Vule

raga0001 · 05-05-2002, 16:16

i done this with Knok engine with normal flasher cable without problem. If i've any problem i'll definetly contact u.

er2000 · 05-11-2002, 19:43

/mod on

Spamming the board with hundrets of adverts is no help

/mod off

BufferMess · 05-12-2002, 15:29

Hi

The problem is flash loader not box/software/cable/ and you!

Newly released software already include necessary flash loader for 008988C4 but old ones do not. If you find proper flash loader you can do it with the simple flasher v1.0b by Dejan (thanks him)

Good Luck
BufferMess

vule · 05-13-2002, 20:45

LOL !!!!

It's not definitely flash loader !!!! I told u....My soft from UNLOCKKING just cuts out first 36 bytes from mcu and that's all...bug in this soft...wrong ini file....wrong flash size in it.....

Maybe Neelix is working but with new soft...My friend has one, he tried and result was dead phone.....After KNOK22 everything was ok

er2000 · 05-14-2002, 22:19

Quote:

Originally posted by er2000
/mod on

Spamming the board with hundrets of adverts is no help

/mod off

what is that bull.......
heres what the guy said: And i was speaking with my friends who had same problem with Neelix box ( working with wintesla files just like my box) and with box of gsmunlock i think.

i just said it WORKS with neelix!
since we make neelix cant i tell that it works perfect on 5210??

next time read before you just modify any post
.......................

G$M solution · 05-16-2002, 06:34

hi

work fine with dejan 1.05 software with smal modification

Best regards

[email protected]

***GSMsolution ZG***

www.gsmsolutionzg.com

vule · 05-16-2002, 18:05

Why r u guys so upset about it??? Especially u ed2000???

I just tried to help to some beginners who maybe had same problem. I did not tried to advertise any box/soft or to spit to another lol

I'm newbie in this forum but not beginner into mobile phones, hardware and software.....5 yrs of experience at work with mobiles, 20 yrs with computers ( since ZX80 ).

Don't want to argue to anyone, just want to help !!!!

And i consider this topic closed !!!!!!

05-02-2002, 16:55	#1 (permalink)
vule No Life Poster Join Date: Apr 2002 Location: Radiometer Medical ApSBrønshøj Age: 51 Posts: 721 Member: 10854 Status: Offline Sonork: 1578988 Thanks Meter: 3	5210 problem??? take a look here!!!!! I have tried recently to upgrade 5210 V5.12 to V5.16 to add language pack and i have killed phone!!!! I tried to do that with unlockking dct3 flasher ( small black box with red and green led on it ). Result was dead phone even if i did more than 1.000 nokias all models with that box. And i was speaking with my friends who had same problem with Neelix box ( working with wintesla files just like my box) and with box of gsmunlock i think. When u flash phone with it soft in box just cuts out first 36 bytes from MCU soft so last programming address is 36 bytes less than normal.... Just use normal dejan flasher and KNOK22 to flash phone then use your box to calculate cheksums ( or u can use any other tool like ). The other solution is to modify .ini file for Your box...Open it in notepad, look for 5210 model description and change flash size to #35 (hex)... If you have any problems mail me. I also have working eeprom of 5210 Best regards, Vule

05-11-2002, 19:43	#3 (permalink)
er2000 No Life Poster Join Date: Sep 2001 Location: P.R.K Posts: 683 Member: 6242 Status: Offline Thanks Meter: 2	Re: 5210 problem??? take a look here!!!!! /mod on Spamming the board with hundrets of adverts is no help /mod off

05-16-2002, 06:34	#7 (permalink)
G$M solution Freak Poster Join Date: Nov 2001 Location: Zagreb, Croatia Age: 41 Posts: 454 Member: 7558 Status: Offline Sonork: 100.94170 Thanks Meter: 6	hi hi work fine with dejan 1.05 software with smal modification Best regards [email protected] *GSMsolution ZG* www.gsmsolutionzg.com

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Pakistani Bro plz take a look here	..::AppleLinks::..	Off Topic Zone	19	03-20-2009 13:52
Take A Look Here !!!!	Javajohn	A1-Services.org	0	06-23-2008 09:22
Hey Mr Siroya! Take a look here	rushwhq	UST Pro II	0	05-31-2008 02:03

05-05-2002, 16:16	#2 (permalink)
raga0001 Freak Poster Join Date: Dec 2001 Posts: 101 Member: 8214 Status: Offline Thanks Meter: 0	i done this with Knok engine with normal flasher cable without problem. If i've any problem i'll definetly contact u.

05-12-2002, 15:29	#4 (permalink)
BufferMess No Life Poster Join Date: Mar 2002 Location: Karabakh - Azeris motherland Age: 45 Posts: 816 Member: 9856 Status: Offline Thanks Meter: 2	Hi The problem is flash loader not box/software/cable/ and you! Newly released software already include necessary flash loader for 008988C4 but old ones do not. If you find proper flash loader you can do it with the simple flasher v1.0b by Dejan (thanks him) Good Luck BufferMess

05-13-2002, 20:45	#5 (permalink)
vule No Life Poster Join Date: Apr 2002 Location: Radiometer Medical ApSBrønshøj Age: 51 Posts: 721 Member: 10854 Status: Offline Sonork: 1578988 Thanks Meter: 3	LOL !!!! It's not definitely flash loader !!!! I told u....My soft from UNLOCKKING just cuts out first 36 bytes from mcu and that's all...bug in this soft...wrong ini file....wrong flash size in it..... Maybe Neelix is working but with new soft...My friend has one, he tried and result was dead phone.....After KNOK22 everything was ok

05-16-2002, 18:05	#8 (permalink)
vule No Life Poster Join Date: Apr 2002 Location: Radiometer Medical ApSBrønshøj Age: 51 Posts: 721 Member: 10854 Status: Offline Sonork: 1578988 Thanks Meter: 3	Why r u guys so upset about it??? Especially u ed2000??? I just tried to help to some beginners who maybe had same problem. I did not tried to advertise any box/soft or to spit to another lol I'm newbie in this forum but not beginner into mobile phones, hardware and software.....5 yrs of experience at work with mobiles, 20 yrs with computers ( since ZX80 ). Don't want to argue to anyone, just want to help !!!! And i consider this topic closed !!!!!!