6210 black screen - GSM-Forum

qtboy · 01-31-2002, 10:37

i have a 6210 that goes black when turned on. i tried writing flash from another phone and the phone says insert sim card (of course no network, four locks closed) so i wrote again to phone orig eeprom and goes black again. im sure the problem is with the eeprom portion but nfree sees no problem with the eeprom area. anyway i tried correcting eeprom checksum still the same. any idea?

mudboy · 01-31-2002, 12:26

You rewrote original EEPROM area from another phone. you CAN'T rewrite EEPROM area! Put your original EEPROM back and IMEI and lock will be same as before. BR

[MoOkIe] · 01-31-2002, 12:56

[quote]Originally posted by qtboy: i have a 6210 that goes black when turned on. i tried writing flash from another phone and the phone says insert sim card (of course no network, four locks closed) so i wrote again to phone orig eeprom and goes black again. im sure the problem is with the eeprom portion but nfree sees no problem with the eeprom area. anyway i tried correcting eeprom checksum still the same. any idea?<hr></blockquote>

Hi!

If your eeprom backup was correct... was your phone dropped into the water? Maybe it is Moisty... Try opening the phone and try to remove it... maybe it can help you...

Sorry for the bad english...

C ya!

qtboy · 02-01-2002, 01:57

i overwrote eeprom area to check if the problem is hardware. it says insert sim card so im sure hardware is good. when i wrote original eeprom (i have a backup) screen goes blank again. so im sure the problem is in the eeprom portion but nfree sees nothing wrong with the checksums and imei is intact. any soft you could recommend?

VAST · 02-02-2002, 04:09

HELLO M8

I HAD THE SAME KIND OF PROBLEM WITH A 5146 V5.31 AND IT WAS LOCKED I FLASHED IT WITH JETHRO V6.C AND IT KILLED MY PHONE, SO I WRITE A 5110-531.FLS FILE AND IT WOULD NOT TURN BACK ON EITHER, I WROTE A 5.03 AND IT WORKED FINE STRANGE HUH, I WOULD NOT RECCOMEND DOING THIS THOUGH AS YOU MAY COMPLETELY KILL IT THEN, AND IF YOU KILL IT I CAN BUY IF OFF YOU FOR £10.00 IF YOU WANT....

REGARDS

ADAM

MAIL ME @

[email protected]

alnasser · 02-05-2002, 20:13

hi

just make full reset by darkflasher

005b0000-005fffff

((((enjoy)))))

Sandman · 02-10-2002, 15:28

hi m8's;

i've encountered that kind of problem and tried to fix it using hardware solution....

just put a small amount of flux at the cobba i.c. then rehot it....

i've repaired many phones using that solution....

 -----------------------------

 kick butt first, take names later <img src="biggrin.gif" border="0"> <img src="biggrin.gif" border="0"> <img src="biggrin.gif" border="0">

01-31-2002, 10:37	#1 (permalink)
qtboy Freak Poster Join Date: Feb 2001 Location: davao city, philippines Posts: 112 Member: 3422 Status: Offline Thanks Meter: 1	6210 black screen i have a 6210 that goes black when turned on. i tried writing flash from another phone and the phone says insert sim card (of course no network, four locks closed) so i wrote again to phone orig eeprom and goes black again. im sure the problem is with the eeprom portion but nfree sees no problem with the eeprom area. anyway i tried correcting eeprom checksum still the same. any idea?

01-31-2002, 12:26	#2 (permalink)
mudboy No Life Poster Join Date: Apr 2001 Location: Czech Republic Posts: 1,059 Member: 4246 Status: Offline Thanks Meter: 9	You rewrote original EEPROM area from another phone.<br />you CAN'T rewrite EEPROM area!<br />Put your original EEPROM back and IMEI and lock will be same as before.<br />BR

01-31-2002, 12:56	#3 (permalink)
[MoOkIe] No Life Poster Join Date: Mar 2001 Location: Leiria, PT & *****, CN Posts: 2,514 Member: 3756 Status: Offline** Thanks Meter: 5	[quote]Originally posted by qtboy:<br /><strong>i have a 6210 that goes black when turned on. i tried writing flash from another phone and the phone says insert sim card (of course no network, four locks closed) so i wrote again to phone orig eeprom and goes black again. im sure the problem is with the eeprom portion but nfree sees no problem with the eeprom area. anyway i tried correcting eeprom checksum still the same. any idea?</strong><hr></blockquote> Hi! If your eeprom backup was correct... was your phone dropped into the water? Maybe it is Moisty... Try opening the phone and try to remove it... maybe it can help you... Sorry for the bad english... C ya!

02-10-2002, 15:28	#7 (permalink)
Sandman No Life Poster Join Date: Nov 2001 Location: Never Land Posts: 924 Member: 7277 Status: Offline Sonork: 100.42158 Thanks Meter: 68	hi m8's; i've encountered that kind of problem and tried to fix it using hardware solution.... just put a small amount of flux at the cobba i.c. then rehot it.... i've repaired many phones using that solution.... <br />----------------------------- <br />kick butt first,<br />take names later <img src="biggrin.gif" border="0"> <img src="biggrin.gif" border="0"> <img src="biggrin.gif" border="0">

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nokia N81 8gb screen problem, artifacts and black screen..	DjDecibel	Nokia Hardware & Hardware Repair	8	01-03-2011 18:15
6210s rm-367 black screen	blue mobile	Nokia Base Band 5 ( BB-5 )	0	12-06-2009 18:48
K800i Camera Not Working Is Show Circle And Black Screen Photo Is Black	guy_askali	Siemens Hardware Repair Area	0	11-09-2007 15:57
V3 / V3r `Black Screen` or Flipping Screen solution.	karwos	Motorola Hardware Repair	3	08-13-2007 19:25

02-01-2002, 01:57	#4 (permalink)
qtboy Freak Poster Join Date: Feb 2001 Location: davao city, philippines Posts: 112 Member: 3422 Status: Offline Thanks Meter: 1	i overwrote eeprom area to check if the problem is hardware. it says insert sim card so im sure hardware is good. when i wrote original eeprom (i have a backup) screen goes blank again. so im sure the problem is in the eeprom portion but nfree sees nothing wrong with the checksums and imei is intact. any soft you could recommend?

02-02-2002, 04:09	#5 (permalink)
VAST Junior Member Join Date: Jan 2002 Location: LONDON UK Posts: 22 Member: 8506 Status: Offline Thanks Meter: 0	HELLO M8 I HAD THE SAME KIND OF PROBLEM WITH A 5146 V5.31 AND IT WAS LOCKED I FLASHED IT WITH JETHRO V6.C AND IT KILLED MY PHONE, SO I WRITE A 5110-531.FLS FILE AND IT WOULD NOT TURN BACK ON EITHER, I WROTE A 5.03 AND IT WORKED FINE STRANGE HUH, I WOULD NOT RECCOMEND DOING THIS THOUGH AS YOU MAY COMPLETELY KILL IT THEN, AND IF YOU KILL IT I CAN BUY IF OFF YOU FOR £10.00 IF YOU WANT.... REGARDS ADAM MAIL ME @ [email protected]

02-05-2002, 20:13	#6 (permalink)
alnasser Freak Poster Join Date: Feb 2001 Location: K.S.A Age: 23 Posts: 376 Member: 3463 Status: Offline Thanks Meter: 4	hi just make full reset by darkflasher 005b0000-005fffff ((((enjoy)))))