6210 soft reset code? - GSM-Forum

kage · 04-08-2002, 03:11

Got a particular problem with blacklisting (ME not Network blacklist) on a 6210.

Nokias' answer is to manually press a key then clear it to reset the blacklist.

I'd like to do it by reset from PC in software.

Anybody have source code to make a software reset?
or
Know how to get AT+CFUN to switch the mobile back on?

Eternal gratitude and all that!

mujie · 04-08-2002, 14:17

I think Nokia talks s-h-i-t ,there are only 2 ways to do this.IMEI CHANGE OR IF NETWORK REMOVES YOUR IMEI FROM ITS EIR.

kage · 04-08-2002, 15:59

Mujie
You have misunderstood!
It is NOT Network BLOCKED!!

I am talking about the mobile's blacklist that stops re-dialling to an unavailable or busy number.

If the first call does not get through, the mobile stops you making another attempt at that same number for a short time. That time gets longer, the more times you try.

This 6210 starts the barring even though the next number is a different one.

It goes to normal if I key any number then clear it on the mobile.

What I want is a software way of re-booting the mobile. You know like in Logomanager where you can reset the mobile.

The command AT+CFUN=0 will switch the mobile OFF but I don't know a way of switching it back ON by software command.

Does any other member of the Forum???

Lead · 04-08-2002, 19:22

By using the AT+CFUN command it's impossible to turn on the phone...

kage · 04-08-2002, 19:36

Thanks, Lead.
There was a hint in some Nokia doc I found that +CFUN=1 would turn it on if the charger was connected, providing power. Mine won't do it and I wondered if it was part of the problem.

Still looking for some software code as per Logomanager!

kage

Lead · 04-08-2002, 20:07

There could be a possibility, try it with a fast charger (ACP-9E, with PWM). But, without a charger, it's impossible.

Lead · 04-08-2002, 20:08

Since you are from UK, you will have to use the ACP-9X, I think.

kage · 04-09-2002, 21:34

Thanks for the advise, Lead. No go!

Still like to know how Logomanager does it???

04-08-2002, 03:11	#1 (permalink)
kage Freak Poster Join Date: Nov 2001 Location: UK Age: 79 Posts: 312 Member: 7314 Status: Offline Thanks Meter: 11	6210 soft reset code? Got a particular problem with blacklisting (ME not Network blacklist) on a 6210. Nokias' answer is to manually press a key then clear it to reset the blacklist. I'd like to do it by reset from PC in software. Anybody have source code to make a software reset? or Know how to get AT+CFUN to switch the mobile back on? Eternal gratitude and all that!

04-08-2002, 20:08	#7 (permalink)
Lead No Life Poster Join Date: Aug 2008 Age: 52 Posts: 3,292 Member: 1841 Status: Offline Thanks Meter: 469	Since you are from UK, you will have to use the ACP-9X, I think. Last edited by Lead; 04-08-2002 at 21:53.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ALL Hard reset - Soft reset PDA SmartPhone	ahsan bhi	HTC & Smartphones ( WM Without Touch)	42	12-08-2016 00:33
[New] Samsung i607 i608 i617 Hard Reset & Soft Reset ...Complete Procedure !!!	TsambakolTeam	QUALCOMM Models (3G)	12	04-08-2015 10:44
A to z smart phones hard reset- soft reset updated	..:::YMG:::..	HTC & Smartphones ( WM Without Touch)	1	03-05-2013 04:18
soft reset??? hard reset???	ardhika_suryana	Nokia Multimedia	1	01-31-2009 13:26
Atom can't boot up after a soft reset/hard reset	D4yw4lk3r	HTC & PDA WM( With Touchscreen)	3	05-28-2006 08:16

04-08-2002, 14:17	#2 (permalink)
mujie No Life Poster Join Date: Jan 2002 Location: MARS Posts: 1,661 Member: 8304 Status: Offline Thanks Meter: 362	I think Nokia talks s-h-i-t ,there are only 2 ways to do this.IMEI CHANGE OR IF NETWORK REMOVES YOUR IMEI FROM ITS EIR.

04-08-2002, 15:59	#3 (permalink)
kage Freak Poster Join Date: Nov 2001 Location: UK Age: 79 Posts: 312 Member: 7314 Status: Offline Thanks Meter: 11	Mujie You have misunderstood! It is NOT Network BLOCKED!! I am talking about the mobile's blacklist that stops re-dialling to an unavailable or busy number. If the first call does not get through, the mobile stops you making another attempt at that same number for a short time. That time gets longer, the more times you try. This 6210 starts the barring even though the next number is a different one. It goes to normal if I key any number then clear it on the mobile. What I want is a software way of re-booting the mobile. You know like in Logomanager where you can reset the mobile. The command AT+CFUN=0 will switch the mobile OFF but I don't know a way of switching it back ON by software command. Does any other member of the Forum???

04-08-2002, 19:22	#4 (permalink)
Lead No Life Poster Join Date: Aug 2008 Age: 52 Posts: 3,292 Member: 1841 Status: Offline Thanks Meter: 469	By using the AT+CFUN command it's impossible to turn on the phone...

04-08-2002, 19:36	#5 (permalink)
kage Freak Poster Join Date: Nov 2001 Location: UK Age: 79 Posts: 312 Member: 7314 Status: Offline Thanks Meter: 11	Thanks, Lead. There was a hint in some Nokia doc I found that +CFUN=1 would turn it on if the charger was connected, providing power. Mine won't do it and I wondered if it was part of the problem. Still looking for some software code as per Logomanager! kage

04-08-2002, 20:07	#6 (permalink)
Lead No Life Poster Join Date: Aug 2008 Age: 52 Posts: 3,292 Member: 1841 Status: Offline Thanks Meter: 469	There could be a possibility, try it with a fast charger (ACP-9E, with PWM). But, without a charger, it's impossible.

04-09-2002, 21:34	#8 (permalink)
kage Freak Poster Join Date: Nov 2001 Location: UK Age: 79 Posts: 312 Member: 7314 Status: Offline Thanks Meter: 11	Thanks for the advise, Lead. No go! Still like to know how Logomanager does it???