6210 switch ways needed - GSM-Forum

aranaar · 11-21-2006, 05:29

mates i need power switch ways of 6210, phone charge but can't power on. i've already change switch.... i think positive line of the switch might be broken.i dont have schematic diagram of this phone.

notz_gsm · 11-21-2006, 06:12

try to check the line sir..
try this picture..

aranaar · 11-21-2006, 07:17

thanks buddy but still dont work.the line connecting from the positve terminal of the switch to that resistor shown in the picture is not broken. do you have any other solution???

notz_gsm · 11-21-2006, 07:32

check the line from the resistor to power ic E4 pin

aranaar · 11-21-2006, 09:13

sir do you know any test point where i can test the continuity from the resistor to E4 pin of power ic?or i realy need to remove the power ic to check the continuity of it....
*** BLESS!!!

notz_gsm · 11-21-2006, 10:00

try to test this line sir

11-21-2006, 05:29	#1 (permalink)
aranaar Junior Member Join Date: Jul 2006 Location: Philippines Posts: 36 Member: 311877 Status: Offline Thanks Meter: 0	6210 switch ways needed mates i need power switch ways of 6210, phone charge but can't power on. i've already change switch.... i think positive line of the switch might be broken.i dont have schematic diagram of this phone.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
T650i power switch way neede urgent.....	jazmob	Sony Ericsson Hardware Repair	1	01-14-2008 00:24
samsung V200 power switch wayes needed	makkah mobile	Samsung Hardware Repair	4	11-15-2007 10:19
3220 antenna switch way need help	sid-ahmed	Nokia Hardware & Hardware Repair	3	10-05-2007 15:06
N3660 power switch ways needed...	kekero_5	Nokia Hardware & Hardware Repair	0	04-08-2007 13:04
x105 antenna switch way needed	HUM	Samsung Hardware Repair	0	02-09-2007 16:52

11-21-2006, 06:12	#2 (permalink)
notz_gsm Insane Poster Join Date: Nov 2006 Location: siyudad sa Butuan Posts: 78 Member: 382968 Status: Offline Thanks Meter: 7	try to check the line sir.. try this picture..

11-21-2006, 07:17	#3 (permalink)
aranaar Junior Member Join Date: Jul 2006 Location: Philippines Posts: 36 Member: 311877 Status: Offline Thanks Meter: 0	thanks buddy but still dont work.the line connecting from the positve terminal of the switch to that resistor shown in the picture is not broken. do you have any other solution???

11-21-2006, 07:32	#4 (permalink)
notz_gsm Insane Poster Join Date: Nov 2006 Location: siyudad sa Butuan Posts: 78 Member: 382968 Status: Offline Thanks Meter: 7	check the line from the resistor to power ic E4 pin

11-21-2006, 09:13	#5 (permalink)
aranaar Junior Member Join Date: Jul 2006 Location: Philippines Posts: 36 Member: 311877 Status: Offline Thanks Meter: 0	sir do you know any test point where i can test the continuity from the resistor to E4 pin of power ic?or i realy need to remove the power ic to check the continuity of it.... *** BLESS!!!