6210 v3.01 PPM - D full backup needed - GSM-Forum

rango · 04-30-2001, 07:53

If someone has this full backup flash send it to me please, or give me the link where I can download.
I destroyed my phone by trying to flash with another version. I saved my backup before but it doesent work. I think my cable is good at writing but bad with reading.
I have data in my backup not just FFFF, can se mcu,ppm,eeprom in my hex but still dont work.
Only thing i can try is to replace eeprom from working flash with eeprom from my flash
using Hex-editor (if my eeprom is not corupted).

If anybody have some idea how to solve this problem or excact a******* from - to (XXXXXX-XXXXX)i shoud try to flash please write or post here.

Thanx all.

rango · 05-01-2001, 00:48

I made a progres, when i flashed the phone with a full flash from "6210 v3.01 ppm - b" from 00200000 to 005A0000 and with my original backup from 005A0000 to 00600000 phone work, but it can't register on the network.

When i checked IMEI it's original.

So I guess that if I flash with "v3.01 ppm-d" (that is my original sw and ppm version) from 00200000 to 005A0000 cheksum will be ok and that phone will work.

So i need that flash.
If anybody have it PLEASEEEEEEEE sent it to me or give me the link where i can download.

Thanx all.

wazl · 05-01-2001, 10:57

Hi Rango,

I will sent you the flash but be careful soft is not tested !!!

Greetings...

wazl

Paul M · 05-05-2001, 23:57

Hi,

I have a 6210 v3.01 that won't register (and resets every 30 secs), it currently has a language pack containing English, Romanian, Polish, "Magyar"? and Greek (I think!). Since it is a UK phone, I suspect it should have PPM D (English, French, German, etc).

Is this likely to be my problem? If so, what area should I flash (my phone has the original IMEI, and I have a full backup in case anything goes wrong). Could you send me the v3.01 file with the correct PPM?

Thanks
Paul.

rango · 05-08-2001, 03:15

Thanx wazl.

But this flash does not work for me, it is 3.01 B language pack and I need D (with Franche,German...) same as "Paul M".

So please guys if you have this backup send!!!
Or if you have 6210 with this version and language pack, read it and then send!!!

THANX AGAIN.

rango · 05-08-2001, 03:31

Oh if anyone need 3310 4.35 partitial flash i can send it to him free, I found it myself this morning. Bye.

rango · 05-12-2001, 02:38

Please guys, I can't beleave nobody has this backup.

!!!TaaTTalTi!!! · 05-12-2001, 08:16

Hi frends,
Can you download link,

6210ppm&mcusw pack download

Good Luck!!!

Volkan

04-30-2001, 07:53	#1 (permalink)
rango Freak Poster Join Date: Dec 2000 Location: Belgrade Age: 33 Posts: 214 Member: 2768 Status: Offline Thanks: 5 Thanked 7 Times in 3 Posts	6210 v3.01 PPM - D full backup needed If someone has this full backup flash send it to me please, or give me the link where I can download. I destroyed my phone by trying to flash with another version. I saved my backup before but it doesent work. I think my cable is good at writing but bad with reading. I have data in my backup not just FFFF, can se mcu,ppm,eeprom in my hex but still dont work. Only thing i can try is to replace eeprom from working flash with eeprom from my flash using Hex-editor (if my eeprom is not corupted). If anybody have some idea how to solve this problem or excact a******* from - to (XXXXXX-XXXXX)i shoud try to flash please write or post here. Thanx all.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
Where I Find Backup for nokia 6210 v3.01	szozda2	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	6	10-24-2001 15:54
6210 v3.01-E full flash	pan_zp	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	0	09-11-2001 09:47
Need full 6210 v3.74 PPM C file	Cyberdog	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	0	08-13-2001 20:55
no one wanna give me full backup for 6210 v3.01	fox	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	3	06-15-2001 19:03
Need full backup for 6210 v3.01	Paul M	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	2	05-19-2001 20:54

05-01-2001, 00:48	#2 (permalink)
rango Freak Poster Join Date: Dec 2000 Location: Belgrade Age: 33 Posts: 214 Member: 2768 Status: Offline Thanks: 5 Thanked 7 Times in 3 Posts	I made a progres, when i flashed the phone with a full flash from "6210 v3.01 ppm - b" from 00200000 to 005A0000 and with my original backup from 005A0000 to 00600000 phone work, but it can't register on the network. When i checked IMEI it's original. So I guess that if I flash with "v3.01 ppm-d" (that is my original sw and ppm version) from 00200000 to 005A0000 cheksum will be ok and that phone will work. So i need that flash. If anybody have it PLEASEEEEEEEE sent it to me or give me the link where i can download. Thanx all.

05-01-2001, 10:57	#3 (permalink)
wazl VIP-Member Join Date: Feb 2001 Age: 44 Posts: 2,187 Member: 3222 Status: Offline Thanks: 1 Thanked 73 Times in 1 Post	Hi Rango, I will sent you the flash but be careful soft is not tested !!! Greetings... wazl

05-05-2001, 23:57	#4 (permalink)
Paul M Insane Poster Join Date: Apr 2001 Location: UK Posts: 62 Member: 4228 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	Hi, I have a 6210 v3.01 that won't register (and resets every 30 secs), it currently has a language pack containing English, Romanian, Polish, "Magyar"? and Greek (I think!). Since it is a UK phone, I suspect it should have PPM D (English, French, German, etc). Is this likely to be my problem? If so, what area should I flash (my phone has the original IMEI, and I have a full backup in case anything goes wrong). Could you send me the v3.01 file with the correct PPM? Thanks Paul.

05-08-2001, 03:15	#5 (permalink)
rango Freak Poster Join Date: Dec 2000 Location: Belgrade Age: 33 Posts: 214 Member: 2768 Status: Offline Thanks: 5 Thanked 7 Times in 3 Posts	Thanx wazl. But this flash does not work for me, it is 3.01 B language pack and I need D (with Franche,German...) same as "Paul M". So please guys if you have this backup send!!! Or if you have 6210 with this version and language pack, read it and then send!!! THANX AGAIN.

05-08-2001, 03:31	#6 (permalink)
rango Freak Poster Join Date: Dec 2000 Location: Belgrade Age: 33 Posts: 214 Member: 2768 Status: Offline Thanks: 5 Thanked 7 Times in 3 Posts	Oh if anyone need 3310 4.35 partitial flash i can send it to him free, I found it myself this morning. Bye.

05-12-2001, 02:38	#7 (permalink)
rango Freak Poster Join Date: Dec 2000 Location: Belgrade Age: 33 Posts: 214 Member: 2768 Status: Offline Thanks: 5 Thanked 7 Times in 3 Posts	Please guys, I can't beleave nobody has this backup.

05-12-2001, 08:16	#8 (permalink)
!!!TaaTTalTi!!! No Life Poster Join Date: Apr 2001 Location: no where Age: 32 Posts: 926 Member: 4121 Status: Offline Thanks: 0 Thanked 11 Times in 10 Posts	Hi frends, Can you download link, 6210ppm&mcusw pack download Good Luck!!! Volkan