6210 and white leds - GSM-Forum

StachurskY · 03-08-2002, 21:06

I've changed leds in my 6210 to the withe ones after that I have bridged the two resistors so the leds would be brighter...After this I have noticed that my battery which I could use for 3days without charging now holds only one day (even not all day) Is it possible that after bridging res. so much power is taken from the battery that it helds less time? I know that in netmonitor I can check voltage but I don't now how high it was before changing leds...now in test 20 BatVol position shows 374 with lights on and 381 with off (the battery indicator has 4 bars)

Enter123 · 03-08-2002, 22:30

could be just desoulder the bridge if this doesnt fix it, it will be 90% power amp ****n, this can also break your battery if PA breaks

ARS · 03-09-2002, 00:22

LED can make so much power consuption...check in net monitor option 23, press and hold * then you see in down right Curr, press and hold * again and check calue that in in place of Curr, on my 6210 is it 5 withouth LED, 105 with LEDs. This valu should show power consuption of your phone.

03-08-2002, 21:06	#1 (permalink)
StachurskY Junior Member Join Date: Mar 2002 Posts: 8 Member: 9835 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	6210 and white leds I've changed leds in my 6210 to the withe ones after that I have bridged the two resistors so the leds would be brighter...After this I have noticed that my battery which I could use for 3days without charging now holds only one day (even not all day) Is it possible that after bridging res. so much power is taken from the battery that it helds less time? I know that in netmonitor I can check voltage but I don't now how high it was before changing leds...now in test 20 BatVol position shows 374 with lights on and 381 with off (the battery indicator has 4 bars)

03-08-2002, 22:30	#2 (permalink)
Enter123 Insane Poster Join Date: Apr 2001 Posts: 73 Member: 4126 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	Re: 6210 and white leds could be just desoulder the bridge if this doesnt fix it, it will be 90% power amp ****n, this can also break your battery if PA breaks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
e/g led become red and power led off	mohmohsah	Smart-Clip	4	01-12-2007 17:53
UFS Boxes w/3 LED and 4 LED?	Spike	UFS2 + UFS3-Tornadoflasher	8	05-21-2004 17:34
One dead 6210 with blue led	jonwillow	Nokia Hardware & Hardware-Repair Area	4	08-18-2002 13:24
SUPPLIER FOR WHITE LEDS???WHERE	jj008	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	1	10-20-2001 20:57

03-09-2002, 00:22	#3 (permalink)
ARS No Life Poster Join Date: Dec 2000 Location: Slovakia, Brezno Age: 37 Posts: 973 Member: 2721 Status: Offline Thanks: 15 Thanked 21 Times in 13 Posts	LED can make so much power consuption...check in net monitor option 23, press and hold * then you see in down right Curr, press and hold * again and check calue that in in place of Curr, on my 6210 is it 5 withouth LED, 105 with LEDs. This valu should show power consuption of your phone.