6250 nhm-3 ask->rpl? - GSM-Forum

lruokonen · 02-20-2011, 19:09

I changed the flash IC (D311?) and now the phone doesn't get any signal. Wrote IMEI with rolis Nokia tool. Is there some prog that could calc RPL from ASK and which could be written with Wintesla?

I know IMEI and SIM data must be written and I have only Wintesla available.

Or...I can try to change flash IC from another phone and flash it properly+change imei. Other suggestions?

lruokonen · 02-21-2011, 05:47

UI works ok. Doest DCT-3 require RX/TX tunings after flash change?

lruokonen · 02-22-2011, 06:41

Problem solved, just needed complete rf tunings

02-20-2011, 19:09	#1 (permalink)
lruokonen Junior Member Join Date: Feb 2011 Location: Finland Posts: 3 Member: 1520958 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	6250 nhm-3 ask->rpl? I changed the flash IC (D311?) and now the phone doesn't get any signal. Wrote IMEI with rolis Nokia tool. Is there some prog that could calc RPL from ASK and which could be written with Wintesla? I know IMEI and SIM data must be written and I have only Wintesla available. Or...I can try to change flash IC from another phone and flash it properly+change imei. Other suggestions?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
sp lock 1,2,3,4 removed	spterminator	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	10	08-09-2010 10:20
£2,000 for 5110/6110 unlock software 1 2 3 4	Dean O'Grady	Wanted Products	14	03-19-2005 09:52
unlocking nokia 1,2,3,4	tazmania121	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	0	08-02-1999 01:20
i can unlock nokia 51xx/61xx sp locks 1,2,3,4 £40 each £30 bulk for u.k only	spterminator	Main Sales Section	0	08-01-1999 05:46
I CAN UNLOCK 1,2,3,4 FOR ANY PHONE £40 (1+) -- £30 (20+)	andrew bennett	Main Sales Section	1	07-26-1999 19:33

02-21-2011, 05:47	#2 (permalink)
lruokonen Junior Member Join Date: Feb 2011 Location: Finland Posts: 3 Member: 1520958 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	UI works ok. Doest DCT-3 require RX/TX tunings after flash change?

02-22-2011, 06:41	#3 (permalink)
lruokonen Junior Member Join Date: Feb 2011 Location: Finland Posts: 3 Member: 1520958 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	Problem solved, just needed complete rf tunings