7110 went totaly dead - GSM-Forum

SmOg · 09-26-2004, 12:35

I just flased my 7110 (with rolis flasher), but during erasing the flash the phone dropped back and the flashing was interrupted.

Maybe the battery voltage was too low.

I tried to reflash it with a fully charged one but rolis cant detect the phone: Check cable, or mobile contact error.

Tried Knok to -> Flash, Erase flash, but always error-> Phone not responding.

Tried Pynoi Flasher to -> Flash, Read, Read Ibfo but always error-> Initative Flash loader Failed - TX1

Now the phone is dead....
Plz,plz,plz help me!!!!!

SmOg · 09-26-2004, 12:36

Now rolis gives sometimes Preloader boot error....

garmani · 10-01-2004, 17:27

Try to decrease a LPT speed in rolis options (increase the delay value) ...

micutu · 10-07-2004, 21:06

or try to flsh with tornado or griffin flasher

hans0001 · 10-21-2004, 18:13

or try to reheat d flash ic,if not ok,change it.

regards

09-26-2004, 12:35	#1 (permalink)
SmOg Freak Poster Join Date: Apr 2003 Location: Hungary Age: 40 Posts: 270 Member: 26021 Status: Offline Thanks Meter: 5	7110 went totaly dead I just flased my 7110 (with rolis flasher), but during erasing the flash the phone dropped back and the flashing was interrupted. Maybe the battery voltage was too low. I tried to reflash it with a fully charged one but rolis cant detect the phone: Check cable, or mobile contact error. Tried Knok to -> Flash, Erase flash, but always error-> Phone not responding. Tried Pynoi Flasher to -> Flash, Read, Read Ibfo but always error-> Initative Flash loader Failed - TX1 Now the phone is dead.... Plz,plz,plz help me!!!!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
warning T205 totaly dead after flashing!!!	al_bu2000	Motorola ODM	2	11-09-2001 08:56
Solution for totaly dead Alcatel db	guiso	Alcatel & TCL Old Models	0	08-29-2001 21:37
8210 totaly dead ,,hardware	misel	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	08-06-2001 20:57
Help 8210 - 5.26 totaly dead	Demon_Ok	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	04-22-2001 20:02
Alcatel BE4 Totaly Dead (hardware problem)	d2cards	Alcatel & TCL Old Models	0	04-22-2001 12:00

09-26-2004, 12:36	#2 (permalink)
SmOg Freak Poster Join Date: Apr 2003 Location: Hungary Age: 40 Posts: 270 Member: 26021 Status: Offline Thanks Meter: 5	Now rolis gives sometimes Preloader boot error....

10-01-2004, 17:27	#3 (permalink)
garmani Freak Poster Join Date: Nov 2003 Location: GSMWorld Age: 49 Posts: 159 Member: 43758 Status: Offline Thanks Meter: 0	Try to decrease a LPT speed in rolis options (increase the delay value) ...

10-07-2004, 21:06	#4 (permalink)
micutu Freak Poster Join Date: Jul 2004 Location: Fagaras Romania Age: 45 Posts: 130 Member: 73571 Status: Offline Thanks Meter: 2	or try to flsh with tornado or griffin flasher

10-21-2004, 18:13	#5 (permalink)
hans0001 Freak Poster Join Date: Sep 2004 Location: Manila,Phillipines Age: 56 Posts: 181 Member: 84177 Status: Offline Thanks Meter: 29	or try to reheat d flash ic,if not ok,change it. regards