8210 help - GSM-Forum

kick · 03-10-2001, 22:39

Need here some help...

While trying to read a nokia 8210 v5.26 to make a backup before flashing, it gives me the error "boot TX data error" and can't read it.

does anyone know how to resolve this? i've tryed different loaders, and nothing.

tkx in adance

ACE_UK · 03-10-2001, 22:51

Check your mail works for me ......

kick · 03-11-2001, 00:42

tks!

I'll try it asap

kick · 03-13-2001, 17:46

hello again,

I've tryed to read another 8210 v5.26 and it gives me ALWAYS the same error "boot TX data error", i've tryed with all loaders i've got... and nothing...

plz help meee

what could it be ?

tkx

MDR · 03-14-2001, 04:58

since its "tx error" transmit error,, maybe its your cable or connection

------------------
MDR

Miko · 03-14-2001, 11:11

Hi Kick and all,

I´ve unlocked this phone using Dark Lemming flasher shell with normal f_loader and 868 boot.bin....

Have you tryed this?

Usa a shell do Dark Lemming e selecciona como f_loader "normal" e 868 boot.bin! Deve resultar. Já experimentaste?

Regards

kick · 03-14-2001, 18:56

hello, i've tryed also dark software, and nothing! i've bought those cables on ucables.com, they are from factory, not manual one, and all work nice, except this on for 8210/8850, and almost certainly its from the cable.

epa, ja tentei usar tudo e mais alguma coisa mas continua a dar-me a merda do "BOOT TX DATA ERROR", provavelmente deve ser da treta do cabo, pk ja tentei tudo e da sempre o mesmo erro. tks na mesma

tkx all for help :=)

Miko · 03-15-2001, 11:53

Try your cable with other 8210/8850´s... but yes, it should be a cable malfunction

Regards

FSC · 03-15-2001, 15:25

The pinouts available are almost all wrong.
Try to switch Tx with RX that should work.
-----------------------------------------
Os pins mais frequentes na net tem o Tx trocado com o RX. Tenta trocar que deve ser esse o problema.

FSC

Dark Lemming · 03-15-2001, 22:41

Ghizz! So many portuguese people here.

try external powering your cable. mine is home made and with external power and no problems till now

===============

Epá. Tanto portuga aki!

tenta por alimentação externa no cabo. Abres essa merda e soldas só 2 fios e um regulador de tensão. até hoje unlokei tudo q o me passou por casa

Dark Lemming

kick · 03-18-2001, 03:31

hello dark.

I've resolved that error, but now it gives me another error... "PHONE NOT RESPOND: LOAD BOOT DATA ", how can i resolve this?
I've tryed a lot of f_loaders and boot.bin, i've tryed yours with normal and 868 boot and liam shell also... and nothing!

SW is 5.26

Plz Help

Ajuda-me tou a desesperar... tkx

Dark Lemming · 03-18-2001, 22:33

i only get that error if i don't remove the batery after a wrong comunication. try to remove batery, put batery on place, than connect the cable. if that doesn't solve your problem, i guess it must be your cable

InKola · 03-19-2001, 21:53

Try to use intel28f160 f_loader... Maybe because of that if you need it tell me... I will send it...

Prodigal · 03-19-2001, 22:31

Yeah, try Dark Lemmings suggestion....that usually works for me

03-10-2001, 22:39	#1 (permalink)
kick No Life Poster Join Date: Feb 2001 Location: Portugal Posts: 673 Member: 3302 Status: Offline Thanks Meter: 16	8210 help Need here some help... While trying to read a nokia 8210 v5.26 to make a backup before flashing, it gives me the error "boot TX data error" and can't read it. does anyone know how to resolve this? i've tryed different loaders, and nothing. tkx in adance

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
8850 & 8210 help! Please!	somebody	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	09-08-2001 08:10
8210 help!! f_loader for 8210 008988c2	Rex	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	03-21-2001 15:54
8210 help	Tom_x	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	09-21-2000 18:59
dead 8210.. help anyone...???	Rosshire	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	07-15-2000 09:07
8210 help!!	Kola	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	06-25-2000 09:10

03-10-2001, 22:51	#2 (permalink)
ACE_UK No Life Poster Join Date: Feb 2001 Location: uk Age: 52 Posts: 1,170 Member: 3267 Status: Offline Thanks Meter: 2	Check your mail works for me ......

03-11-2001, 00:42	#3 (permalink)
kick No Life Poster Join Date: Feb 2001 Location: Portugal Posts: 673 Member: 3302 Status: Offline Thanks Meter: 16	tks! I'll try it asap

03-13-2001, 17:46	#4 (permalink)
kick No Life Poster Join Date: Feb 2001 Location: Portugal Posts: 673 Member: 3302 Status: Offline Thanks Meter: 16	hello again, I've tryed to read another 8210 v5.26 and it gives me ALWAYS the same error "boot TX data error", i've tryed with all loaders i've got... and nothing... plz help meee what could it be ? tkx

03-14-2001, 04:58	#5 (permalink)
MDR No Life Poster Join Date: Apr 2000 Location: Philippines Posts: 555 Member: 1272 Status: Offline Thanks Meter: 3	since its "tx error" transmit error,, maybe its your cable or connection ------------------ MDR

03-14-2001, 11:11	#6 (permalink)
Miko Freak Poster Join Date: Nov 1999 Posts: 188 Member: 707 Status: Offline Thanks Meter: 0	Hi Kick and all, I´ve unlocked this phone using Dark Lemming flasher shell with normal f_loader and 868 boot.bin.... Have you tryed this? Usa a shell do Dark Lemming e selecciona como f_loader "normal" e 868 boot.bin! Deve resultar. Já experimentaste? Regards

03-14-2001, 18:56	#7 (permalink)
kick No Life Poster Join Date: Feb 2001 Location: Portugal Posts: 673 Member: 3302 Status: Offline Thanks Meter: 16	hello, i've tryed also dark software, and nothing! i've bought those cables on ucables.com, they are from factory, not manual one, and all work nice, except this on for 8210/8850, and almost certainly its from the cable. epa, ja tentei usar tudo e mais alguma coisa mas continua a dar-me a merda do "BOOT TX DATA ERROR", provavelmente deve ser da treta do cabo, pk ja tentei tudo e da sempre o mesmo erro. tks na mesma tkx all for help :=)

03-15-2001, 11:53	#8 (permalink)
Miko Freak Poster Join Date: Nov 1999 Posts: 188 Member: 707 Status: Offline Thanks Meter: 0	Try your cable with other 8210/8850´s... but yes, it should be a cable malfunction Regards

03-15-2001, 15:25	#9 (permalink)
FSC Freak Poster Join Date: Jan 2001 Location: Portugal Posts: 133 Member: 2949 Status: Offline Thanks Meter: 0	The pinouts available are almost all wrong. Try to switch Tx with RX that should work. ----------------------------------------- Os pins mais frequentes na net tem o Tx trocado com o RX. Tenta trocar que deve ser esse o problema. FSC

03-15-2001, 22:41	#10 (permalink)
Dark Lemming Freak Poster Join Date: Dec 2000 Location: Portugal Posts: 463 Member: 2785 Status: Offline Thanks Meter: 0	Ghizz! So many portuguese people here. try external powering your cable. mine is home made and with external power and no problems till now =============== Epá. Tanto portuga aki! tenta por alimentação externa no cabo. Abres essa merda e soldas só 2 fios e um regulador de tensão. até hoje unlokei tudo q o me passou por casa Dark Lemming

03-18-2001, 03:31	#11 (permalink)
kick No Life Poster Join Date: Feb 2001 Location: Portugal Posts: 673 Member: 3302 Status: Offline Thanks Meter: 16	hello dark. I've resolved that error, but now it gives me another error... "PHONE NOT RESPOND: LOAD BOOT DATA ", how can i resolve this? I've tryed a lot of f_loaders and boot.bin, i've tryed yours with normal and 868 boot and liam shell also... and nothing! SW is 5.26 Plz Help Ajuda-me tou a desesperar... tkx

03-18-2001, 22:33	#12 (permalink)
Dark Lemming Freak Poster Join Date: Dec 2000 Location: Portugal Posts: 463 Member: 2785 Status: Offline Thanks Meter: 0	i only get that error if i don't remove the batery after a wrong comunication. try to remove batery, put batery on place, than connect the cable. if that doesn't solve your problem, i guess it must be your cable

03-19-2001, 21:53	#13 (permalink)
InKola Insane Poster Join Date: Mar 2000 Posts: 66 Member: 1041 Status: Offline Thanks Meter: 0	Try to use intel28f160 f_loader... Maybe because of that if you need it tell me... I will send it...

03-19-2001, 22:31	#14 (permalink)
Prodigal Freak Poster Join Date: May 2000 Location: Durban, South Africa Posts: 184 Member: 1456 Status: Offline Thanks Meter: 0	Yeah, try Dark Lemmings suggestion....that usually works for me