8210 Problem!! Please Help!!! - GSM-Forum

sherv · 04-12-2002, 15:47

hi
last week i got an 8210 motherboard with 5 of the keypad leds missing and the screen leds not working, would turn on, but then off after the black screen or would just freeze. i will let me write numbers as if there is no sim in it if i read the fone info immedialtly afer turning it on but nothing else. i tried SFS and SW reset no luck. I dont have flashing equipmentt either, can any one tell me what to do? Thanx in advance!!

Sherv.

sherv · 04-14-2002, 22:12

Anyone??

BufferMess · 04-14-2002, 23:16

Well, look serious!

If you had flashing equip, I would say flash good eeprom and flash to phone, then post results! But you don`t have them. What can I say? Such problems can also be because of CCONT and MAD2. I don`t want to mislead you. Wait, maybe somebody faced this problem before and can help you!

Good Luck
BufferMess

sherv · 04-15-2002, 10:09

Thanx! Im trying to get some flashing equipment and i might have it in a few days. Could you please tell me how to 'reflow/reheat CCONT' in simple terms? Thanx in advance!!

04-12-2002, 15:47	#1 (permalink)
sherv Junior Member Join Date: Mar 2002 Posts: 20 Member: 10371 Status: Offline Thanks Meter: 0	8210 Problem!! Please Help!!! hi last week i got an 8210 motherboard with 5 of the keypad leds missing and the screen leds not working, would turn on, but then off after the black screen or would just freeze. i will let me write numbers as if there is no sim in it if i read the fone info immedialtly afer turning it on but nothing else. i tried SFS and SW reset no luck. I dont have flashing equipmentt either, can any one tell me what to do? Thanx in advance!! Sherv.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
k800i network stage problem please help me antenna problem make a call restart please	prakash40	Sony Ericsson Hardware Repair	1	09-24-2009 14:12
8210 big problem,please help!	sky master	Nokia Hardware & Hardware Repair	1	07-14-2004 01:38
A Nokia 8210 Problem...Plzzz help...	RVictor	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	5	10-13-2002 15:18
8210 problem - please help!!	quix	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	5	08-06-2002 00:53
8210 problem please help	simbirley	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	06-04-2001 23:05

04-14-2002, 22:12	#2 (permalink)
sherv Junior Member Join Date: Mar 2002 Posts: 20 Member: 10371 Status: Offline Thanks Meter: 0	Anyone??

04-14-2002, 23:16	#3 (permalink)
BufferMess No Life Poster Join Date: Mar 2002 Location: Karabakh - Azeris motherland Age: 45 Posts: 816 Member: 9856 Status: Offline Thanks Meter: 2	Well, look serious! If you had flashing equip, I would say flash good eeprom and flash to phone, then post results! But you don`t have them. What can I say? Such problems can also be because of CCONT and MAD2. I don`t want to mislead you. Wait, maybe somebody faced this problem before and can help you! Good Luck BufferMess

04-15-2002, 10:09	#4 (permalink)
sherv Junior Member Join Date: Mar 2002 Posts: 20 Member: 10371 Status: Offline Thanks Meter: 0	Thanx! Im trying to get some flashing equipment and i might have it in a few days. Could you please tell me how to 'reflow/reheat CCONT' in simple terms? Thanx in advance!!