8210 with sharp flash - GSM-Forum

Bigbrothers2000 · 12-17-2001, 14:40

i can not write a full flash to a 8210 with a sharp flash inside it is always stopping in 35% or 40% i tryed many loaders but nothing who can help me please

Lonegunman · 12-17-2001, 18:26

I have back up's for all the 8210 phones (05.29 as well) so what are you looking for??

Bigbrothers2000 · 12-17-2001, 18:47

man backup's is no problem i have backup's too problem is it stop when writing

rolis · 12-17-2001, 19:59

Hi

I had the same situation with one 8210 and exactly - sharp flash. My success was when i put external power supply +4..5V to cable and use fully charged battery. If you can begin to flash - you flash loader must be OK.For 2MB sharp may use Intel8Mb fl.loader.

Hope it helps

rolis

spawoolm · 12-18-2001, 00:37

Do you know the flash ID? since you can start writing you must now it. If it is 008988C2,tell me to send you the right floader.

Bigbrothers2000 · 12-18-2001, 10:51

the flash ID is 00B00048

rolis · 12-18-2001, 12:12

00B00048 are Sharp LH28F160BVE, ALIAS_ID=00898890 ( Intel 28F160B3-T, size 16Mb)

Works intel 8MB loader(5580 bytes)

Bigbrothers2000 · 12-18-2001, 13:05

can you send me please the loader

rolis · 12-18-2001, 15:41

Check mail ,but if you have Dejan's flasher package,you're 100 % already have it. Check your HDD <img src="smile.gif" border="0">

 regards, rolis

welly2000 · 12-18-2001, 15:56

hi any one can send me dejan 1.0 schematic with external power source and can i use it with all phone types

rolis · 12-18-2001, 20:16

Why need special schematic's ? <img src="smile.gif" border="0"> Put dirrectly on 74HC14 or similar pin 14 +3,6 /4.5v (depends on phone ) and try 100% tested for 3210 must be about 3.6, cause on VPP +5 flash erasing failed.

br r.

12-17-2001, 14:40	#1 (permalink)
Bigbrothers2000 No Life Poster Join Date: Sep 1999 Location: Europe Age: 40 Posts: 1,364 Member: 487 Status: Offline Thanks: 15 Thanked 61 Times in 39 Posts	8210 with sharp flash i can not write a full flash to a 8210 with a sharp flash inside<br />it is always stopping in 35% or 40%<br />i tryed many loaders but nothing who can help me please

12-17-2001, 18:47	#3 (permalink)
Bigbrothers2000 No Life Poster Join Date: Sep 1999 Location: Europe Age: 40 Posts: 1,364 Member: 487 Status: Offline Thanks: 15 Thanked 61 Times in 39 Posts	man backup's is no problem<br />i have backup's too<br />problem is it stop when writing

12-17-2001, 19:59	#4 (permalink)
rolis Freak Poster Join Date: Aug 2001 Posts: 116 Member: 5786 Status: Offline Thanks: 0 Thanked 1 Time in 1 Post	Hi I had the same situation with one 8210 <br />and exactly - sharp flash. <br />My success was when i put external power supply <br />+4..5V to cable and use fully charged battery.<br />If you can begin to flash - you flash loader must be OK.For 2MB sharp may use Intel8Mb fl.loader. Hope it helps rolis

12-18-2001, 00:37	#5 (permalink)
spawoolm Freak Poster Join Date: May 2000 Location: crete,greece Posts: 363 Member: 1400 Status: Offline Thanks: 59 Thanked 70 Times in 21 Posts	Do you know the flash ID?<br />since you can start writing you must now it.<br />If it is 008988C2,tell me to send you the right floader.

12-18-2001, 12:12	#7 (permalink)
rolis Freak Poster Join Date: Aug 2001 Posts: 116 Member: 5786 Status: Offline Thanks: 0 Thanked 1 Time in 1 Post	00B00048 are <br />Sharp LH28F160BVE, ALIAS_ID=00898890 ( Intel 28F160B3-T, size 16Mb) Works intel 8MB loader(5580 bytes)

12-17-2001, 18:26	#2 (permalink)
Lonegunman No Life Poster Join Date: Dec 2001 Location: London Age: 38 Posts: 804 Member: 7939 Status: Offline Thanks: 0 Thanked 2 Times in 2 Posts	I have back up's for all the 8210 phones (05.29 as well) so what are you looking for??

12-18-2001, 10:51	#6 (permalink)
Bigbrothers2000 No Life Poster Join Date: Sep 1999 Location: Europe Age: 40 Posts: 1,364 Member: 487 Status: Offline Thanks: 15 Thanked 61 Times in 39 Posts	the flash ID is 00B00048

12-18-2001, 13:05	#8 (permalink)
Bigbrothers2000 No Life Poster Join Date: Sep 1999 Location: Europe Age: 40 Posts: 1,364 Member: 487 Status: Offline Thanks: 15 Thanked 61 Times in 39 Posts	can you send me please the loader

12-18-2001, 15:41	#9 (permalink)
rolis Freak Poster Join Date: Aug 2001 Posts: 116 Member: 5786 Status: Offline Thanks: 0 Thanked 1 Time in 1 Post	Check mail ,but <br />if you have Dejan's flasher package,you're <br />100 % already have it. <br />Check your HDD <img src="smile.gif" border="0"> <br />regards,<br />rolis

12-18-2001, 15:56	#10 (permalink)
welly2000 Freak Poster Join Date: Jul 2001 Age: 41 Posts: 439 Member: 5265 Status: Offline Thanks: 0 Thanked 2 Times in 2 Posts	hi<br />any one can send me dejan 1.0 schematic with external power source and can i use it with all phone types

12-18-2001, 20:16	#11 (permalink)
rolis Freak Poster Join Date: Aug 2001 Posts: 116 Member: 5786 Status: Offline Thanks: 0 Thanked 1 Time in 1 Post	Why need special schematic's ? <br /> <img src="smile.gif" border="0"> <br />Put dirrectly on 74HC14 or similar pin 14 +3,6 /4.5v (depends on phone ) and try <br />100% tested <br />for 3210 must be about 3.6, cause on VPP +5 <br />flash erasing failed. br<br />r.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
Can I fash Sharp 703SHF with Sharp 703SH flash file ?	peter24533	Cruiser Suite	1	11-15-2006 14:04
BIG PROBLEM 2100 with SHARP FLASH - IMEI update not possible!!!	sat	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	25	12-02-2003 17:57
Cant flash 3310/8210 with unibox 3.0	Falck	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	0	08-14-2003 21:53
8210 With Flash Id : Sharp	PHONELOCKER	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	7	04-26-2002 08:26
Flashing 8210 with flash from 8250	Chawek	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	2	02-22-2002 15:57