8210_IMEI 00000000000000-0_and "CS" - GSM-Forum

plruzza · 06-16-2003, 19:39

I have 8210:
MCU SW: V 5.31 08-03-02 NSM-3(c)NMP.
IMEI: 000000000000000
Original IMEI: 656565656565656
Product Code: 0000000
Sequrity code: 00000

MS ID: 83 12EB3180253D44704FF0DB56

Flash CHK: 591D0716
Cobba ID: 007E231D 23

SIM Locks:

MCC+MNC: EEEEE CLOSED
GID1 : FFFF CLOSED
GID2 : FFFF CLOSED
MSIN : EEEEEEEEEE CLOSED

I can read phone info with any program and eveery time I get same results.
I used "EEPROM Repair for Nokia DCT3 phones v1.0 by Dejan kaljevic" and got massage
Updating phone IMEI...
Done
...but IMEI is still "0000....."

I used also "Eprom Tools 3.1" and also got massage "IMEI updated successfully" but it didn't changed or restore IMEI.
Unfortunately I don't have flash cable, only MBUS and FBUS. I did't reflash phone.
Is it possible repaire that phone only with MBUS or FBUS cable?What program I must use?
Thanks in advance and best regards

GazI · 06-16-2003, 22:04

i think you need to flash a virgin eprom to your phone but you need flasher cabel.

ok try with nokia tool 1.8

Paulic [WbC] · 06-24-2003, 14:57

Try Knock-Phoenix to default the locks and fix your IMEI. Knock-Phoenix will change both IMEI to the number, you choose and will calculate the right checksume = your mobile will work after them.

nonu_don · 07-03-2003, 11:57

The best solution,, full flash ur phone... cause i have seen that 6565656565 imei is less repairable by nok tools...

Naman

essojay · 07-03-2003, 12:28

Check first the cause of the contact service with eeprom tool but from experience your phone eeprom is bad, since you have a valid MSID all you need do is write virgin eeprom, update faid and unlock 4 lock closed.

BR

Syed · 07-03-2003, 13:34

or if that sounds confusing use Rolis and write a full flash image to your phone, change IMEI, Update Faid,thats all and viola ur phone okay again..

WBR
Syed

pc.net · 07-03-2003, 13:43

nonsense only!!!
How you repair people's phones??? I dont know?!?!?!
You have to solder the ccount or change it!!!
That is, and after that change IMEI with original.
Is it hard?
I can't believe it. If anyone need from teaching let call me:
[email protected]
But that it is not for free!!!

GSM Deals · 07-03-2003, 13:49

It might be also coba serial or parallel connection just use eepromtools with mbus cable and select test and see then cause
of CS

pc.net · 07-03-2003, 13:53

nonsense!!!!!!!
If the Original IMEI is 656565656565656
then ccount.
did you understand me or not?
I can't believe it?!?!?!

nonu_don · 07-03-2003, 14:03

i dont know what is ur prob,, but i wrote in simple english,, once i had imei 65656565656565 in my 8250, but repaired it with full flash and thats it... i think u should give it a check...

Syed · 07-03-2003, 15:30

Quote:

Originally posted by pc.net
nonsense!!!!!!!
If the Original IMEI is 656565656565656
then ccount.
did you understand me or not?
I can't believe it?!?!?!

sir can u explain us what CCONT has got to do with phone IMEI ???

WBR
Syed

pc.net · 07-04-2003, 06:38

Quote:

Originally posted by syed
sir can u explain us what CCONT has got to do with phone IMEI ???

WBR
Syed

You will understand me after few years, I hope

))))))))))

nonu_don · 07-04-2003, 06:54

i think "Mr. pc.net" is really from MARS... as his Profile says...

Hehehehe

Syed · 07-04-2003, 11:23

yes u r right Naman maybe at mars we have phone IMEI in CCONT..... BTW i have already seen the years you are talking about..... i am not a newbie here....

Syed

pc.net · 07-04-2003, 15:15

I know where is the IMEI.
But you don't know why the original IMEI is 6565656...
If you need from teaching call me. That is not for free.
And don't forget I did put on the net A55 unlock solution, befor SPUNLOCK. Ask him

Bye "farmer John"

06-16-2003, 19:39	#1 (permalink)
plruzza Freak Poster Join Date: Dec 1999 Location: 17 deg 49 min South Posts: 301 Member: 771 Status: Offline Thanks Meter: 9	8210_IMEI 00000000000000-0_and "CS" I have 8210: MCU SW: V 5.31 08-03-02 NSM-3(c)NMP. IMEI: 000000000000000 Original IMEI: 656565656565656 Product Code: 0000000 Sequrity code: 00000 MS ID: 83 12EB3180253D44704FF0DB56 Flash CHK: 591D0716 Cobba ID: 007E231D 23 SIM Locks: MCC+MNC: EEEEE CLOSED GID1 : FFFF CLOSED GID2 : FFFF CLOSED MSIN : EEEEEEEEEE CLOSED I can read phone info with any program and eveery time I get same results. I used "EEPROM Repair for Nokia DCT3 phones v1.0 by Dejan kaljevic" and got massage Updating phone IMEI... Done ...but IMEI is still "0000....." I used also "Eprom Tools 3.1" and also got massage "IMEI updated successfully" but it didn't changed or restore IMEI. Unfortunately I don't have flash cable, only MBUS and FBUS. I did't reflash phone. Is it possible repaire that phone only with MBUS or FBUS cable?What program I must use? Thanks in advance and best regards

07-04-2003, 11:23	#14 (permalink)
Syed No Life Poster Join Date: Jan 2003 Location: Hong Kong. Age: 47 Posts: 3,092 Member: 19979 Status: Offline Thanks Meter: 116	yes u r right Naman maybe at mars we have phone IMEI in CCONT..... BTW i have already seen the years you are talking about..... i am not a newbie here.... Syed Last edited by Syed; 07-04-2003 at 11:29.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
3120c rm-346 "CS" security test failed [solved (server update)]	i-Fixed	MXKEY Nokia Flasher and Unlocker (by Alim Hape)	12	03-11-2011 15:02
8210 Sometimes "CS", other times "just Read"	dannyogolo	Nokia Hardware & Hardware Repair	2	05-19-2003 22:26
J70 with IMEI 00000000000000 problem	Chuk	Sony	0	02-01-2002 08:42
J70 IMEI 00000000000000 Soft or Hardware?	Chuk	Trash	0	01-31-2002 19:37

06-16-2003, 22:04	#2 (permalink)
GazI No Life Poster Join Date: Jan 2003 Location: KOSOVA Age: 36 Posts: 1,278 Member: 20566 Status: Offline Thanks Meter: 29	i think you need to flash a virgin eprom to your phone but you need flasher cabel. ok try with nokia tool 1.8

06-24-2003, 14:57	#3 (permalink)
Paulic [WbC] Crazy Poster Join Date: Nov 2000 Location: Germany Posts: 56 Member: 2575 Status: Offline Thanks Meter: 0	Try Knock-Phoenix to default the locks and fix your IMEI. Knock-Phoenix will change both IMEI to the number, you choose and will calculate the right checksume = your mobile will work after them.

07-03-2003, 11:57	#4 (permalink)
nonu_don No Life Poster Join Date: Feb 2003 Location: ..::India::.. Age: 40 Posts: 3,809 Member: 22538 Status: Offline Sonork: 100.67180 Thanks Meter: 2,252	The best solution,, full flash ur phone... cause i have seen that 6565656565 imei is less repairable by nok tools... Naman

07-03-2003, 12:28	#5 (permalink)
essojay No Life Poster Join Date: Jul 2002 Location: uk Posts: 3,601 Member: 13808 Status: Offline Thanks Meter: 163	Check first the cause of the contact service with eeprom tool but from experience your phone eeprom is bad, since you have a valid MSID all you need do is write virgin eeprom, update faid and unlock 4 lock closed. BR

07-03-2003, 13:34	#6 (permalink)
Syed No Life Poster Join Date: Jan 2003 Location: Hong Kong. Age: 47 Posts: 3,092 Member: 19979 Status: Offline Thanks Meter: 116	or if that sounds confusing use Rolis and write a full flash image to your phone, change IMEI, Update Faid,thats all and viola ur phone okay again.. WBR Syed

07-03-2003, 13:43	#7 (permalink)
pc.net Freak Poster Join Date: Nov 2002 Location: Mars Age: 55 Posts: 284 Member: 17659 Status: Offline Thanks Meter: 0	nonsense only!!! How you repair people's phones??? I dont know?!?!?! You have to solder the ccount or change it!!! That is, and after that change IMEI with original. Is it hard? I can't believe it. If anyone need from teaching let call me: [email protected] But that it is not for free!!!

07-03-2003, 13:49	#8 (permalink)
GSM Deals No Life Poster Join Date: Apr 2001 Location: AGADIR Morocco Posts: 1,626 Member: 3936 Status: Offline Thanks Meter: 237	It might be also coba serial or parallel connection just use eepromtools with mbus cable and select test and see then cause of CS

07-03-2003, 13:53	#9 (permalink)
pc.net Freak Poster Join Date: Nov 2002 Location: Mars Age: 55 Posts: 284 Member: 17659 Status: Offline Thanks Meter: 0	nonsense!!!!!!! If the Original IMEI is 656565656565656 then ccount. did you understand me or not? I can't believe it?!?!?!

07-03-2003, 14:03	#10 (permalink)
nonu_don No Life Poster Join Date: Feb 2003 Location: ..::India::.. Age: 40 Posts: 3,809 Member: 22538 Status: Offline Sonork: 100.67180 Thanks Meter: 2,252	i dont know what is ur prob,, but i wrote in simple english,, once i had imei 65656565656565 in my 8250, but repaired it with full flash and thats it... i think u should give it a check...

07-04-2003, 06:54	#13 (permalink)
nonu_don No Life Poster Join Date: Feb 2003 Location: ..::India::.. Age: 40 Posts: 3,809 Member: 22538 Status: Offline Sonork: 100.67180 Thanks Meter: 2,252	i think "Mr. pc.net" is really from MARS... as his Profile says... Hehehehe

07-04-2003, 15:15	#15 (permalink)
pc.net Freak Poster Join Date: Nov 2002 Location: Mars Age: 55 Posts: 284 Member: 17659 Status: Offline Thanks Meter: 0	I know where is the IMEI. But you don't know why the original IMEI is 6565656... If you need from teaching call me. That is not for free. And don't forget I did put on the net A55 unlock solution, befor SPUNLOCK. Ask him Bye "farmer John"