9210 error when trying to flash it :( - GSM-Forum

SicilianBoy · 12-05-2005, 12:18

hi,i use nbox and software is dctx_1.3_m

first i want to ask which files should i flash to make this phone turn again on...i dont know if i need to flash MCU and PPM or only MCU or only PPM,i also noticed that MCU and PPM flash files should be the same file???

anyway i tried to flash both MCU and PPM with the same file(RAE33004.13R)and thats what i get...:

1st Boot Ok, DCT LINDA
FLID: 00898896,Int 28F320B3-T, i28f640.fia
Software: V 04.14 07-05-02 RAE-3 (c) NMP.
Algorithm Ok, [14B9]
Area1: 0x02060000-0x0218FFFF Erased, Time: 00013
Area2: 0x023D0000-0x023EFFFF Erased, Time: 00001
MCU Flashing Completed, Time: 00107
1st Boot Ok, DCT LINDA
FLID: 00898896,Int 28F320B3-T, i28f640.fia
Software: V 04.14 07-05-02 RAE-3 (c) NMP.
Algorithm Ok, [14B9]
Area1: 0x02060000-0x0218FFFF Erased, Time: 00013
Area2: 0x023D0000-0x023EFFFF Erased, Time: 00001
PPM Flashing Completed, Time: 00107
Flashing Completed, Rebooting Mobile
Power Up / Init Local Mode Failed !
Flash Id Failed esId

what can it be???? what can i do??? thanks a lot in advance!

later

webseller · 12-16-2005, 00:25

the flashes are in phone ok
now u have to set faid and reset phone to full factory after that all should work fine.
cu webseller

12-22-2005, 08:45

Quote:

Originally Posted by SicilianBoy

hi,i use nbox and software is dctx_1.3_m
first i want to ask which files should i flash to make this phone turn again on...i dont know if i need to flash MCU and PPM or only MCU or only PPM,i also noticed that MCU and PPM flash files should be the same file???
anyway i tried to flash both MCU and PPM with the same file(RAE33004.13R)and thats what i get...:
1st Boot Ok, DCT LINDA
FLID: 00898896,Int 28F320B3-T, i28f640.fia
Software: V 04.14 07-05-02 RAE-3 (c) NMP.
Algorithm Ok, [14B9]
Area1: 0x02060000-0x0218FFFF Erased, Time: 00013
Area2: 0x023D0000-0x023EFFFF Erased, Time: 00001
MCU Flashing Completed, Time: 00107
1st Boot Ok, DCT LINDA
FLID: 00898896,Int 28F320B3-T, i28f640.fia
Software: V 04.14 07-05-02 RAE-3 (c) NMP.
Algorithm Ok, [14B9]
Area1: 0x02060000-0x0218FFFF Erased, Time: 00013
Area2: 0x023D0000-0x023EFFFF Erased, Time: 00001
PPM Flashing Completed, Time: 00107
Flashing Completed, Rebooting Mobile
Power Up / Init Local Mode Failed !
Flash Id Failed esId
what can it be???? what can i do??? thanks a lot in advance!
later

Flash With J.A.F ... 100% working ... njoy

12-05-2005, 12:18	#1 (permalink)
SicilianBoy No Life Poster Join Date: Oct 2004 Age: 44 Posts: 2,115 Member: 88333 Status: Offline Thanks Meter: 48	9210 error when trying to flash it :( hi,i use nbox and software is dctx_1.3_m first i want to ask which files should i flash to make this phone turn again on...i dont know if i need to flash MCU and PPM or only MCU or only PPM,i also noticed that MCU and PPM flash files should be the same file??? anyway i tried to flash both MCU and PPM with the same file(RAE33004.13R)and thats what i get...: 1st Boot Ok, DCT LINDA FLID: 00898896,Int 28F320B3-T, i28f640.fia Software: V 04.14 07-05-02 RAE-3 (c) NMP. Algorithm Ok, [14B9] Area1: 0x02060000-0x0218FFFF Erased, Time: 00013 Area2: 0x023D0000-0x023EFFFF Erased, Time: 00001 MCU Flashing Completed, Time: 00107 1st Boot Ok, DCT LINDA FLID: 00898896,Int 28F320B3-T, i28f640.fia Software: V 04.14 07-05-02 RAE-3 (c) NMP. Algorithm Ok, [14B9] Area1: 0x02060000-0x0218FFFF Erased, Time: 00013 Area2: 0x023D0000-0x023EFFFF Erased, Time: 00001 PPM Flashing Completed, Time: 00107 Flashing Completed, Rebooting Mobile Power Up / Init Local Mode Failed ! Flash Id Failed esId what can it be???? what can i do??? thanks a lot in advance! later

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Alcatel E221 when Trying to flash it,it respond:wrong answer after chip id request	beneto	Infinity-Box	0	07-18-2009 11:24
Z1010 - Phone won't turn on, "failed to load CERTLOADERS" error when trying to flash	Kole89	Sony Ericsson	0	02-24-2008 23:00
Header Error when trying to Flash GX20 - Can anyone help?	gasman	Sharp	3	03-31-2006 15:26
6230i no power... wont go past 2nd boot when trying to flash it	Burnt Cobba	Nokia Hardware & Hardware Repair	5	03-15-2006 17:19

12-16-2005, 00:25	#2 (permalink)
webseller Junior Member Join Date: Aug 2003 Age: 49 Posts: 36 Member: 37617 Status: Offline Thanks Meter: 0	the flashes are in phone ok now u have to set faid and reset phone to full factory after that all should work fine. cu webseller