9210 keyboard problem - GSM-Forum

MaDoG · 05-04-2005, 22:10

the keys only work if i remove de battery for a long period, then after i reatart the 9210, after a few minutes the keybord front and internal stops work!!!

any one know the sollution for this problem!!

i already format...
thanks ppl

jay8ers · 05-25-2005, 10:40

change flex..................

egymatrix · 06-19-2005, 23:27

try to formate first..... if not

chke fexe

astana2005 · 07-17-2005, 02:24

Change Flex Or Repair Flex

potzilla · 08-18-2005, 08:04

how can i format my 9210, what keys will i use?

BANTUGBRO · 08-18-2005, 09:11

Hi, udont need to change flex the problem is the flex connector and the board's clean them and make sure that the female and male are tight fit together! they must be loose.
goodluck!

BANTUGBRO.

Likom · 08-21-2005, 14:52

boz i'm sure 100000% change the flex cable

Pardoon · 08-01-2006, 02:38

1.change the Flex Cable
2.try to reflow the 5 crystal ic at the small main board,Z403,Z404,Z400,Z401(if still same,change it)

potzilla · 08-03-2006, 15:06

yes its flex 100000%.

good luck!

05-04-2005, 22:10	#1 (permalink)
MaDoG Junior Member Join Date: Apr 2005 Age: 47 Posts: 4 Member: 133946 Status: Offline Thanks Meter: 0	9210 keyboard problem the keys only work if i remove de battery for a long period, then after i reatart the 9210, after a few minutes the keybord front and internal stops work!!! any one know the sollution for this problem!! i already format... thanks ppl

08-01-2006, 02:38	#8 (permalink)
Pardoon Freak Poster Join Date: May 2004 Location: Malaysia Age: 50 Posts: 153 Member: 66197 Status: Offline Thanks Meter: 2	9210 keypad jam 1.change the Flex Cable 2.try to reflow the 5 crystal ic at the small main board,Z403,Z404,Z400,Z401(if still same,change it)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
9210 Keyboard Problem	bambaiya1	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	9	11-13-2003 08:56
9210 flashing Problem	dannyogolo	Federal One	2	10-12-2003 20:23
Nokia 9210 MMC problem	ivanov80	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	07-04-2003 08:40
9210 flashing problem	pali	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	03-25-2003 17:46
9210 Big problem please help!!!	James	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	5	01-09-2003 16:59

05-25-2005, 10:40	#2 (permalink)
jay8ers Freak Poster Join Date: May 2004 Location: ur next door Neighbour Age: 43 Posts: 109 Member: 66511 Status: Offline Thanks Meter: 2	change flex..................

06-19-2005, 23:27	#3 (permalink)
egymatrix Junior Member Join Date: Apr 2004 Age: 44 Posts: 5 Member: 62955 Status: Offline Thanks Meter: 0	try to formate first..... if not chke fexe

07-17-2005, 02:24	#4 (permalink)
astana2005 Banned Join Date: Jun 2005 Age: 51 Posts: 140 Member: 152204 Status: Offline Thanks Meter: 5	Change Flex Or Repair Flex

08-18-2005, 08:04	#5 (permalink)
potzilla Freak Poster Join Date: Aug 2005 Location: Philippines Age: 48 Posts: 138 Member: 168612 Status: Offline Thanks Meter: 11	how can i format my 9210, what keys will i use?

08-18-2005, 09:11	#6 (permalink)
BANTUGBRO Freak Poster Join Date: Nov 2003 Age: 49 Posts: 204 Member: 43363 Status: Offline Thanks Meter: 2	Hi, udont need to change flex the problem is the flex connector and the board's clean them and make sure that the female and male are tight fit together! they must be loose. goodluck! BANTUGBRO.

08-21-2005, 14:52	#7 (permalink)
Likom Junior Member Join Date: Aug 2005 Age: 43 Posts: 26 Member: 171525 Status: Offline Thanks Meter: 2	boz i'm sure 100000% change the flex cable

08-03-2006, 15:06	#9 (permalink)
potzilla Freak Poster Join Date: Aug 2005 Location: Philippines Age: 48 Posts: 138 Member: 168612 Status: Offline Thanks Meter: 11	yes its flex 100000%. good luck!