All Nokia by Jethro 4 free - GSM-Forum

Dark Lemming · 03-16-2001, 17:18

http://www.crosswinds.net/~darklemming

there you'll find All_jethro.zip which contains jethro's software v2.95 + keymaker + cable schematic. i don't know if the cable works, but, someone told me that there was no need for the pic, so only five cables needed, since the buffer can be bypassed. please test it and post results here. have phun

Dark Lemming

Demon_Ok · 03-17-2001, 09:48

This programm best. I have unlock 3210 v6.0
3310 v4.18 6210 v 3.01

thank.

Disaster · 03-17-2001, 12:48

This programm best. I have unlock 3210 v6.0
3310 v4.18 6210 v 3.01
thank.

--------------------------------------------------------------------------------
to Demon_ok.
You make cable without PIC & Buffer?
Pls send to me your schematic or PIC .hex file
10nx

Y2K · 03-17-2001, 13:13

hi Dark Lemming

whats about the bin or hex file for the pic12C508???that is shown in schematics???

regards Y2K

Tom_x · 03-17-2001, 14:55

All Nokia by Jethro working without PIC12c508. I use 74HCT14. Now the unlock is very simple.The prog detect SW version, flash ID, and automatically upload the partial flash.

gsmdude · 03-17-2001, 17:55

can i use the dejam interface with this prog???

tanks

Sandy · 03-17-2001, 18:47

Hi to all!
Dark has a right
I unlocked 8210v5.21,3310v4.06,7110v4.94 till today.
My cable is also without PIC,but buffer must to be,because you need to increase voltage.
For example, computer has on LPT port 5V,and resistor 470Ohm that is 10mA,but mobile work also on 5V but on exit has 2mA.That is reason for communication between mobile and PC
Have a nice day!

Stryker · 03-18-2001, 04:03

the software/hardware works ! ive unlocked 3210 & 3310. no problem with my desktop but on my laptop, it *****! ;(

regards to all!!

dito · 03-19-2001, 03:34

Stryker

What hardware did you use for the cable?
What settings did you use on LPT port?

I tried with 74hc04 and it gave nothing, with 74hc32 I got "bootloader loaded", but the program did nothing...
I had no 74hc00 to test with, may this one works...
Tested with 3310...

Allen · 03-19-2001, 08:52

Same question,

Does dejan interface work with this Jethro soft?

bisdak · 03-19-2001, 10:52

Allen:

Definitely not! All I/O in dejan are inverted as oppose to Jethro’s but you can use the extra inverters in your dejan interface as buffer for TX and take the rest directly from the DB-25 (RX, Mbus.GND,VPP). You may need two jacks thou!

Mobileman_hu · 03-19-2001, 21:02

You only need the PIC if you want to unlock old Nokia phones!! That's it!

RvH · 03-19-2001, 21:35

Hello,

It's works .
I am have unlock 3310 v4.18 100%

Thanks,

j0e · 03-19-2001, 21:42

Can sombody tell me the right pinouts for 74hc(t)14 chip for Jethros flasher? It is the same like 74hc04?

Regards, Joe

Quote:

Originally posted by RvH:
Hello,

It's works .
I am have unlock 3310 v4.18 100%

Thanks,

LIKI · 03-19-2001, 22:31

hi,

working 100%.

b.r.
LIKI999

03-16-2001, 17:18	#1 (permalink)
Dark Lemming Freak Poster Join Date: Dec 2000 Location: Portugal Posts: 463 Member: 2785 Status: Offline Thanks Meter: 0	All Nokia by Jethro 4 free http://www.crosswinds.net/~darklemming there you'll find All_jethro.zip which contains jethro's software v2.95 + keymaker + cable schematic. i don't know if the cable works, but, someone told me that there was no need for the pic, so only five cables needed, since the buffer can be bypassed. please test it and post results here. have phun Dark Lemming

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Unlock free all nokia by Imei (DCT3-DCT4)	..::GsmHelp::..	GSM Mobile Links	1	08-08-2008 09:04
Nokia by Jethro v6D	evilspell	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	80	06-10-2002 06:45
All Nokia by Jethro 331	wazl	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	14	04-24-2001 19:23
All Nokia by Jethro is free	GSM Brothers	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	04-18-2001 03:32
All Nokia by Jethro is free	GSM Brothers	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	04-15-2001 09:34

03-17-2001, 09:48	#2 (permalink)
Demon_Ok No Life Poster Join Date: Mar 2001 Location: Kazakhstan Age: 48 Posts: 522 Member: 3528 Status: Offline Thanks Meter: 5	This programm best. I have unlock 3210 v6.0 3310 v4.18 6210 v 3.01 thank.

03-17-2001, 12:48	#3 (permalink)
Disaster Insane Poster Join Date: Mar 2001 Location: Lithuania Posts: 96 Member: 3552 Status: Offline Thanks Meter: 0	This programm best. I have unlock 3210 v6.0 3310 v4.18 6210 v 3.01 thank. -------------------------------------------------------------------------------- to Demon_ok. You make cable without PIC & Buffer? Pls send to me your schematic or PIC .hex file 10nx

03-17-2001, 13:13	#4 (permalink)
Y2K VIP-Member Join Date: May 1999 Location: home Posts: 285 Member: 69 Status: Offline Thanks Meter: 0	hi Dark Lemming whats about the bin or hex file for the pic12C508???that is shown in schematics??? regards Y2K

03-17-2001, 14:55	#5 (permalink)
Tom_x Registered User Join Date: Aug 2000 Location: Hungary Posts: 492 Member: 1815 Status: Offline Thanks Meter: 3	All Nokia by Jethro working without PIC12c508. I use 74HCT14. Now the unlock is very simple.The prog detect SW version, flash ID, and automatically upload the partial flash.

03-17-2001, 17:55	#6 (permalink)
gsmdude Insane Poster Join Date: Dec 1999 Posts: 64 Member: 831 Status: Offline Thanks Meter: 0	can i use the dejam interface with this prog??? tanks

03-17-2001, 18:47	#7 (permalink)
Sandy Insane Poster Join Date: Nov 2000 Location: Zagreb,Croatia Posts: 94 Member: 2503 Status: Offline Thanks Meter: 0	Hi to all! Dark has a right I unlocked 8210v5.21,3310v4.06,7110v4.94 till today. My cable is also without PIC,but buffer must to be,because you need to increase voltage. For example, computer has on LPT port 5V,and resistor 470Ohm that is 10mA,but mobile work also on 5V but on exit has 2mA.That is reason for communication between mobile and PC Have a nice day!

03-18-2001, 04:03	#8 (permalink)
Stryker Freak Poster Join Date: Jun 2000 Location: In front of pc Posts: 308 Member: 1585 Status: Offline Thanks Meter: 15	the software/hardware works ! ive unlocked 3210 & 3310. no problem with my desktop but on my laptop, it *****! ;( regards to all!!

03-19-2001, 03:34	#9 (permalink)
dito No Life Poster Join Date: Jan 2000 Posts: 501 Member: 860 Status: Offline Thanks Meter: 1	Stryker What hardware did you use for the cable? What settings did you use on LPT port? I tried with 74hc04 and it gave nothing, with 74hc32 I got "bootloader loaded", but the program did nothing... I had no 74hc00 to test with, may this one works... Tested with 3310...

03-19-2001, 08:52	#10 (permalink)
Allen No Life Poster Join Date: Sep 2000 Location: Philippines Posts: 521 Member: 2034 Status: Offline Thanks Meter: 24	Same question, Does dejan interface work with this Jethro soft?

03-19-2001, 10:52	#11 (permalink)
bisdak Junior Member Join Date: Feb 2001 Location: Philippines Posts: 5 Member: 3417 Status: Offline Thanks Meter: 0	Allen: Definitely not! All I/O in dejan are inverted as oppose to Jethro’s but you can use the extra inverters in your dejan interface as buffer for TX and take the rest directly from the DB-25 (RX, Mbus.GND,VPP). You may need two jacks thou!

03-19-2001, 21:02	#12 (permalink)
Mobileman_hu Freak Poster Join Date: Jan 2001 Location: Hungary Age: 47 Posts: 476 Member: 3097 Status: Offline Thanks Meter: 30	You only need the PIC if you want to unlock old Nokia phones!! That's it!

03-19-2001, 21:35	#13 (permalink)
RvH Junior Member Join Date: Nov 2000 Location: Holland Age: 58 Posts: 21 Member: 2512 Status: Offline Thanks Meter: 0	Hello, It's works . I am have unlock 3310 v4.18 100% Thanks,

03-19-2001, 22:31	#15 (permalink)
LIKI Freak Poster Join Date: Jun 2000 Posts: 357 Member: 1641 Status: Offline Thanks Meter: 54	hi, working 100%. b.r. LIKI999