Attention to Rom3 phones owners!

[rolis]

Hello ppl.

Seems ,that we have problems with "nk_calc" and old 5110/6110
phones with ROM3 DSP version (MSId begins with "81").
Do not run SP locks clear or IMEI change operations on these phones,cause you may loose it.
If you wanna play ,make 24C16(24C64) eeprom backups.Not flash - here aren't any information,regarding IMEI and other stuff.If you are in trouble now,seach other phone with similar DSP version and replase cobba+eeprom toogether.
I may take less than half hour.If you don't have experience here,ask who have near you.

Howewer ,FAID update works already 100% ok for all ROM versions.And in most case after IMEI change needs to make SP locks initialisation too.

For other "reversers" :
When i'm checked dejan "nk_calc " (i think ,dejan will be not verry angry at this...) i found that ROM3 hash 12 bit keys values are the same like for ROM5/6.It may cause all this known ROM3 problems.Needs "only" correct 12 bytes for IMEI and 12 bytes for SP locks,cause all algo are the same like for MSId,FAID,SP,IMEI



Best wishes
rolis

ps.:all this not minimize nk_calc importance.

[Xepuis]

Rolis, when do we have next version of your soft?

Is quite useful for us. In fact, I think it's the best

Originally posted by Xepuis
Rolis, when do we have next version of your soft?

Is quite useful for us. In fact, I think it's the best

I also think your soft is useful,(BEST) Dark Lemming is released his new shell , What about you ?

[rolis]

About the "best" ,i'm verry critical.
Because no one can be the best ,even Micro$oft Windows
For every good sw may appear more better.
It's just time,investments and some $ question to make better sw
And i'm not a student - so,can't invest all my time to this project.
Only at free time, or when i need it for my works.Here i have not finished siemens,sagem,alcatel other projects.But now when my nokia flash research are broken down by Dejan K. release,will be more time for flasher.
We all know ,that partials now are the past.Now flasher will be
just for sw and language pack update.Scenario are simple :
needs to include more friendly interface for language/sw choose. Collect all flashes,info about language packs and make it.

And i wish good look for other creators like Dark Lemming,Nutzo in theyr projects.Who's using theyr free sw - you
must VERRY appreciate theyr hard work and efforts for free.



With best wishes
rolis

[luminousblack]

hey sir rolis "You're the MAN!!!"

[Yolly Zubrick]

@Rolis:

Good day sir! Thanks for the advice on ROM3 phones.

By the way, I'd like to know more on the functionality of your flasher program. Is there an official web page for this? Or a place where I can download an FAQ or Help file?

[xpmobile]

Hi Rolis,

You are the best man overhere that helps others. =-)

Regards
Alan

[ed2k_7]

SW <->ASIC MISMATCH
USE SW FOR DSP ROM 3

Yes, it did not work with nk_calc soft and that will be the message after trying to flash it with Box 105 or any other equivalent .

...what do you think to do rolis?

[rolis]

Hi

@Yolly Zubrick :have patience,maybe in next week comes new flasher version.
Before THIS (i mean dejan .......) were ready new flasher version
called 478,but like You all know,partials are useless now.
Additional needs to include more functions + m2bus.
For some good help start, here are DavieB page www.cellularbase.co.uk

If someone are interested,here i'm already maked m2bus tools
with FAID,Sp locks and IMEI initialisation.If be true - upgraded
my old nokia m2bus sw.And here i'm disabled ROM3 sp+imei.
Soon i'm send to some people and they may post for free somewhere.All credits with all this goes to Dejan K pic sources and nk_calc sw ,not to me ...

@ed2k_2 :
Sorry,but here probably no way.Needs these 12 byte keys for ROM3.
Or HW way :change cobba+e2p or change MAD2 and flash ROM4 version + full initialisation.
Only mcu sw to ROM4 changing will not help here,cause DSP version inside MAD2 remains the same (it like some first BOOT ROM for DSP).Flash detects it and show this crap "SW <->ASIC MISMATCH ......."

But i must say,that i'm not tryed to get inside more in this problem.If i'm not shure - always reading eeprom backup trougth cable and second - now not need to worry about DSP version with my new sw.Howewer ,if i'll get this problem,i'll simple swap 2 chips.

Other thing are,maybe nokia algo have some week points and are possible to find key faster coze brute force method here are useless .... 12 byte key are gigantic diggit.To get it by lucky ...he ....more probability are to win Jeck Pot every day.
Ofcource,with all this above,here i'm not pretend to be 100% true.



Regards
rolis

[mRoiZo83]

I love DCT3 Flasher by Rolis, its perfect!
I think he is the flasher *** beside Dejan.

[emibox2002]

Originally posted by ed2k_2
SW <->ASIC MISMATCH
USE SW FOR DSP ROM 3

Yes, it did not work with nk_calc soft and that will be the message after trying to flash it with Box 105 or any other equivalent .

...what do you think to do rolis?

Hi ,
flash phone with the right version, because there are two dsp at nokia DSP3 and DSP4. For the same version of firware there are two difrent file

[cab]

Hi Rolis,

I love your software. I trust it more than other else, especially making backup files. Although it reads slower than the original dejan flasher, I am sure that I am reading the whole flash not "FFFFFFF".

Thanks
cab