CMD error ! - GSM-Forum

micklong · 02-04-2001, 13:20

hello all .. been trying for ages need some second opinions and ideas ..

i have tried thousands of *.tia files ..
i have checked cable loads of times .

the main phone i have been trying on is 3310 3.24 ..
00200090: ST M28W160BT, ALIAS_ID=00898890
also been tying on a 5110 5.x
00898892: Intel 28F800B3-T, size 8Mb
i dont actally have these tia's,
so help with this is my first request?..

second is that my voltage on board is about 2.7 - 3 V is this enought, even if the LPT setting is on SPP its 3V (i have tried all the other settings)

the main error i get (when i think its going to work) is CMD error, i have browsed the forum and have'nt found much info on this error... it does go to 20100 as well before it displays the error ..

i can get a blank flash.out easy, does this mean that the board, and settings are ok ..?

ANY info is a help ..
thanks alot people your time is a appreciated .. Mick..

landy · 02-04-2001, 20:31

You don´need to search for *tia files, only download the flasher shell in any page and try with different INTEL/ATMEL/INTEL28F60 for reading&writing the phones, be carefully of reading not to be 00. Here you can find the download and some explications: http://www.aggtcablesgsm.com/

micklong · 02-05-2001, 00:09

sorry lander, but im not italiain (or which ever langage it is)

also i have tried all the shells for the flasher, (3 of them) still no joy, all i have been able to get is blank flash.out ..

started up another thread, with the suggestion that its the motherboard/chiptype
which may b the problem, some kind of compatibilty problem ??

thanks any how,
any other opions are very welcome ...

02-04-2001, 13:20	#1 (permalink)
micklong Freak Poster Join Date: Jan 2001 Location: UK Posts: 287 Member: 3153 Status: Offline Thanks: 0 Thanked 2 Times in 2 Posts	CMD error ! hello all .. been trying for ages need some second opinions and ideas .. i have tried thousands of *.tia files .. i have checked cable loads of times . the main phone i have been trying on is 3310 3.24 .. 00200090: ST M28W160BT, ALIAS_ID=00898890 also been tying on a 5110 5.x 00898892: Intel 28F800B3-T, size 8Mb i dont actally have these tia's, so help with this is my first request?.. second is that my voltage on board is about 2.7 - 3 V is this enought, even if the LPT setting is on SPP its 3V (i have tried all the other settings) the main error i get (when i think its going to work) is CMD error, i have browsed the forum and have'nt found much info on this error... it does go to 20100 as well before it displays the error .. i can get a blank flash.out easy, does this mean that the board, and settings are ok ..? ANY info is a help .. thanks alot people your time is a appreciated .. Mick..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
nokia 3110c please help...Error in RD cmd... Error preparing flashing...	i gede sukerawa	Nokia Base Band 5 ( BB-5 )	16	03-13-2012 06:01
6500 cmd error flash.Error finding cmd loader...	parand	Nokia Hardware & Hardware-Repair Area	0	12-24-2008 17:35
6300 Error in RD cmd Error preparing flashing	geti	Nokia Base Band 5 ( BB-5 )	1	11-04-2008 11:29

02-04-2001, 20:31	#2 (permalink)
landy No Life Poster Join Date: Jan 2001 Location: Madrid, Spain Posts: 779 Member: 3075 Status: Offline Thanks: 0 Thanked 2 Times in 2 Posts	You don´need to search for *tia files, only download the flasher shell in any page and try with different INTEL/ATMEL/INTEL28F60 for reading&writing the phones, be carefully of reading not to be 00. Here you can find the download and some explications: http://www.aggtcablesgsm.com/

02-05-2001, 00:09	#3 (permalink)
micklong Freak Poster Join Date: Jan 2001 Location: UK Posts: 287 Member: 3153 Status: Offline Thanks: 0 Thanked 2 Times in 2 Posts	sorry lander, but im not italiain (or which ever langage it is) also i have tried all the shells for the flasher, (3 of them) still no joy, all i have been able to get is blank flash.out .. started up another thread, with the suggestion that its the motherboard/chiptype which may b the problem, some kind of compatibilty problem ?? thanks any how, any other opions are very welcome ...