Confirm 3210 5.36 unlock by this method... - GSM-Forum

nightxyz · 08-30-2000, 05:50

i saw a solution in this forum.A needle is required to make this job.Connect needle to EEPROM pin 5.
how many people did try this method and which percent did it work ?

thanks in advance...

John_Doe · 08-30-2000, 08:50

The solution with pin5 works 100% for me.
But i have take resistor 10k and connect directly to ground.
I have made now 30 phones and they´re all working fine.

Drsnak · 08-30-2000, 21:30

It works good. 4 of 4 successfuly unlocked. Be fine . ...just something , sometimes you have to try it 3 ,5 , or 10 times until it works - be patient

xoder · 09-01-2000, 03:54

Hi, did u do only this??? and as always nokia pro tool???

-----
|----| 10k |-----|
| ----- |
| |
--5| |4 ------
6| |3
7| |2
8| o|1

Sorry for this picture your put 10k between pin 4 of eeprom (gnd) and pin num.5 of eeprom?

Thanks!
This is amazing

Quote:

Originally posted by John_Doe:
The solution with pin5 works 100% for me.
But i have take resistor 10k and connect directly to ground.
I have made now 30 phones and they´re all working fine.

[This message has been edited by xoder (edited 01 September 2000).]

[This message has been edited by xoder (edited 01 September 2000).]

John_Doe · 09-01-2000, 09:29

Hi again,

I put one side of resistor to pin5 and the other side I have connected to ground of the mbus cable.

08-30-2000, 05:50	#1 (permalink)
nightxyz Freak Poster Join Date: Jun 2000 Posts: 354 Member: 1623 Status: Offline Thanks Meter: 1	Confirm 3210 5.36 unlock by this method... i saw a solution in this forum.A needle is required to make this job.Connect needle to EEPROM pin 5. how many people did try this method and which percent did it work ? thanks in advance...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need 3210 5.36 ppm B and 6210 5.27 ppmJ.	Bogi	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	03-28-2002 04:45
Suddenly can't unlock 3210 5.36?	laxxe	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	7	06-10-2001 00:50
Unlock 3210 5.36	Abdul	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	10-14-2000 17:07
3210 5.36 HELP ???	igor_m	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	08-23-2000 18:16
Nokia 3210 5.36.. Unlock Help ME PLS.... SOS...	helpme	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	08-20-2000 14:01

08-30-2000, 08:50	#2 (permalink)
John_Doe No Life Poster Join Date: Aug 2000 Location: anywhere Posts: 596 Member: 1879 Status: Offline Sonork: 100.28016 Thanks Meter: 941	The solution with pin5 works 100% for me. But i have take resistor 10k and connect directly to ground. I have made now 30 phones and they´re all working fine.

08-30-2000, 21:30	#3 (permalink)
Drsnak Junior Member Join Date: Aug 2000 Location: Czech Republic Posts: 4 Member: 1915 Status: Offline Thanks Meter: 0	It works good. 4 of 4 successfuly unlocked. Be fine . ...just something , sometimes you have to try it 3 ,5 , or 10 times until it works - be patient

09-01-2000, 09:29	#5 (permalink)
John_Doe No Life Poster Join Date: Aug 2000 Location: anywhere Posts: 596 Member: 1879 Status: Offline Sonork: 100.28016 Thanks Meter: 941	Hi again, I put one side of resistor to pin5 and the other side I have connected to ground of the mbus cable.