dejan all FF and 00,and nu2000 doesn't work anymore - GSM-Forum

Abe · 07-01-2001, 03:19

I have 2 problems:
1. I cannot read flash from nokias.i get all FF and 00 but its not a problem of f_loaders or Amd and Atmel chips........because i use the same loader and the same nokia in my friends computer and all goes OK........
2. My lpt1 port now works only with printer........nu2000 and jethro software doesnt work anymore...i get error message in connection every time.....nu2000 says to check connect when i click UNLOCK.even without phone attached to the cable.....my jethro soft says WRONG TYPE SELECTED...i have 5130 and i choose 5130 in jethro soft........i heard that some fake software on the net,when you click UNLOCK the prog changes some parametres in BIOS for LPT port so i cannot unlock nokia any more,but i dont remember which one i started because i tested several software(it doesnt kill COM port only LPT)...i have a friend with a same problem but we dont know the solution ,only to try to flash BIOS......
Please if someone knows the 100% working solution just write it here for all.For both problems...regards.......

brunito · 07-01-2001, 04:53

im my computer is the same .please help me

brunito · 07-07-2001, 16:57

help meeeeeeeeeeeeee

tshea · 07-07-2001, 19:04

do a custom intall with software
this will solve problem

ahmed · 07-07-2001, 19:22

I am experiencing the same problem ,what i have noticed is that with the Flasher Cable connected to LPT PORT , CABLE CONNECTION ERROR appears , if you remove the cable from LPT PORT , NO ERROR

ARC · 07-07-2001, 20:07

Hi there
Did u changed your LPT port to ECP or SPP or ECP+SPP ?

bye

TheEckoMan · 07-08-2001, 00:55

Ey!
Why dont u format your hard drive then install everything again, LPT Configiration might be good again.

ahmed · 07-08-2001, 08:20

I have made no changes at all to my LPT PORT configuration , I think that something has ****n in the cable , can anyone share a similar experience

ced1298 · 07-08-2001, 15:58

Hello everybody

i experience that kind of problem.The root problem iz the ic MM74hc14N.
try to change the part code of ur "ic".look for M74HC14N its be coz the internal parts of ur ic has damage by some Nokia unlocking software.may be its overdrive from the voltage comming thru ur diodes.i test it all and i replace a new ic then 100% working again

ahmed · 07-08-2001, 16:20

Hi Cedric ,thanks for the help , all the ic has printed on top is 74hc14n , how will i know the difference between the one you recommend and the one i have ,

hadak1 · 07-08-2001, 18:54

I have the same problem: I use my home-made dejan cable with dejan flasher but I can't use it with NU2000. phone tpe is detected but prog goes crazy right after... Are there any modification to the dejan schematics to be compatible with NU2000 !! Thanks

fox · 07-08-2001, 21:08

Connect pin 7 with pin 11 will work with nu2000
regards

07-01-2001, 03:19	#1 (permalink)
Abe No Life Poster Join Date: Apr 2001 Location: Croatia Age: 45 Posts: 1,114 Member: 4185 Status: Offline Thanks Meter: 3	dejan all FF and 00,and nu2000 doesn't work anymore I have 2 problems: 1. I cannot read flash from nokias.i get all FF and 00 but its not a problem of f_loaders or Amd and Atmel chips........because i use the same loader and the same nokia in my friends computer and all goes OK........ 2. My lpt1 port now works only with printer........nu2000 and jethro software doesnt work anymore...i get error message in connection every time.....nu2000 says to check connect when i click UNLOCK.even without phone attached to the cable.....my jethro soft says WRONG TYPE SELECTED...i have 5130 and i choose 5130 in jethro soft........i heard that some fake software on the net,when you click UNLOCK the prog changes some parametres in BIOS for LPT port so i cannot unlock nokia any more,but i dont remember which one i started because i tested several software(it doesnt kill COM port only LPT)...i have a friend with a same problem but we dont know the solution ,only to try to flash BIOS...... Please if someone knows the 100% working solution just write it here for all.For both problems...regards.......

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
6170 7, 8, 9 and the red button doesn't work	to_deal_with	Nokia Hardware & Hardware Repair	8	09-13-2006 11:34
SX1 and BlueSoleil - File transfer doesn't work	sljaka	x1x to x45/x50	1	06-27-2006 16:28
Jehtro 3.11 doesn't work anymore :( Solutions?	ponticellinks	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	09-03-2001 15:16
Jehtro 3.11 doesn't work anymore :( Solutions?	ponticellinks	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	09-03-2001 15:07
changed imei on 6110 doesn't work anymore	hikaru	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	08-13-1999 22:43

07-01-2001, 04:53	#2 (permalink)
brunito Junior Member Join Date: Apr 2001 Posts: 9 Member: 3955 Status: Offline Thanks Meter: 0	im my computer is the same .please help me

07-07-2001, 16:57	#3 (permalink)
brunito Junior Member Join Date: Apr 2001 Posts: 9 Member: 3955 Status: Offline Thanks Meter: 0	help meeeeeeeeeeeeee

07-07-2001, 19:04	#4 (permalink)
tshea Junior Member Join Date: Mar 2001 Location: lancs Posts: 12 Member: 3905 Status: Offline Thanks Meter: 0	do a custom intall with software this will solve problem

07-07-2001, 19:22	#5 (permalink)
ahmed No Life Poster Join Date: Feb 2001 Posts: 1,290 Member: 3279 Status: Offline Thanks Meter: 19	I am experiencing the same problem ,what i have noticed is that with the Flasher Cable connected to LPT PORT , CABLE CONNECTION ERROR appears , if you remove the cable from LPT PORT , NO ERROR

07-07-2001, 20:07	#6 (permalink)
ARC No Life Poster Join Date: Jun 2001 Location: UAE Age: 43 Posts: 1,419 Member: 5019 Status: Offline Sonork: 100.110196 Thanks Meter: 69	Hi there Did u changed your LPT port to ECP or SPP or ECP+SPP ? bye

07-08-2001, 00:55	#7 (permalink)
TheEckoMan No Life Poster Join Date: Mar 2001 Location: Australia, Melbourne Age: 37 Posts: 548 Member: 3902 Status: Offline Thanks Meter: 19	Ey! Why dont u format your hard drive then install everything again, LPT Configiration might be good again.

07-08-2001, 08:20	#8 (permalink)
ahmed No Life Poster Join Date: Feb 2001 Posts: 1,290 Member: 3279 Status: Offline Thanks Meter: 19	I have made no changes at all to my LPT PORT configuration , I think that something has ****n in the cable , can anyone share a similar experience

07-08-2001, 15:58	#9 (permalink)
ced1298 Freak Poster Join Date: May 2001 Location: Philippine/Bermuda Age: 49 Posts: 335 Member: 4691 Status: Offline Thanks Meter: 42	Hello everybody i experience that kind of problem.The root problem iz the ic MM74hc14N. try to change the part code of ur "ic".look for M74HC14N its be coz the internal parts of ur ic has damage by some Nokia unlocking software.may be its overdrive from the voltage comming thru ur diodes.i test it all and i replace a new ic then 100% working again

07-08-2001, 16:20	#10 (permalink)
ahmed No Life Poster Join Date: Feb 2001 Posts: 1,290 Member: 3279 Status: Offline Thanks Meter: 19	Hi Cedric ,thanks for the help , all the ic has printed on top is 74hc14n , how will i know the difference between the one you recommend and the one i have ,

07-08-2001, 18:54	#11 (permalink)
hadak1 Freak Poster Join Date: Apr 2000 Location: Paris Posts: 193 Member: 1180 Status: Offline Thanks Meter: 0	I have the same problem: I use my home-made dejan cable with dejan flasher but I can't use it with NU2000. phone tpe is detected but prog goes crazy right after... Are there any modification to the dejan schematics to be compatible with NU2000 !! Thanks

07-08-2001, 21:08	#12 (permalink)
fox No Life Poster Join Date: May 2001 Location: Norway Posts: 501 Member: 4489 Status: Offline Thanks Meter: 2	Connect pin 7 with pin 11 will work with nu2000 regards