dsp alive test failed. - GSM-Forum

paygee · 08-29-2002, 20:01

hi[list]
8850nokia powered on, but no display,after 20seconds it shows contact service. when tested with eeprom tools 'test' option shows this message ''dsp alive test failed'' please repair phone, now i am confused with 'repair' ,,,is it a hardware problem or software, please some 1 guide me.

mujie · 08-30-2002, 07:50

Your Mad2 i.c is faulty,not replaceable or repairable.

Tips:
1 - use 8850 as a paperwheight
2 - throw it against a wall and see how much damage it can still take
3 - Wait until someone brings you a dead 8850,fix it,swop pcb.NOW YOU HAVE A WORKING 8850,YEAH!!!!

he,he,he,he,he

paygee · 08-30-2002, 08:02

hi mr gsm ***,[list]
thanks a lot for ur suggestions,if it were ur phone ,i must do what u'v suggested,with a free service of hammering.

fantom · 09-01-2002, 15:11

Hello

Sorry 8m you have faulty MAD2 & you must replaced & ther is a solution for the glue around the MAD2,i use a fluid i by it from somone & it's solve the glue & remove it at all so ask the stores in your country.

I wich to you a good luck

FANTOM

08-29-2002, 20:01	#1 (permalink)
paygee No Life Poster Join Date: May 2002 Location: asia Age: 53 Posts: 711 Member: 11742 Status: Offline Thanks Meter: 1	dsp alive test failed. hi[list] 8850nokia powered on, but no display,after 20seconds it shows contact service. when tested with eeprom tools 'test' option shows this message ''dsp alive test failed'' please repair phone, now i am confused with 'repair' ,,,is it a hardware problem or software, please some 1 guide me.

08-30-2002, 08:02	#3 (permalink)
paygee No Life Poster Join Date: May 2002 Location: asia Age: 53 Posts: 711 Member: 11742 Status: Offline Thanks Meter: 1	8850 hi mr gsm ***,[list] thanks a lot for ur suggestions,if it were ur phone ,i must do what u'v suggested,with a free service of hammering.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
3410 - DSP Alive - FAILED!	AlexG	Nokia Hardware & Hardware Repair	2	08-20-2003 19:05
contact service- dsp alive test failed !	edoy	Nokia Hardware & Hardware Repair	1	07-23-2002 06:23
Hi.dsp alive fail?	gsmsalers	Nokia Hardware & Hardware Repair	13	06-30-2002 20:49
8890 DSP test FAILED?!	trafix	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	02-24-2002 18:23
DSP alive test failed, how to repair	steve	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	07-05-1999 15:01

08-30-2002, 07:50	#2 (permalink)
mujie No Life Poster Join Date: Jan 2002 Location: MARS Posts: 1,661 Member: 8304 Status: Offline Thanks Meter: 362	Your Mad2 i.c is faulty,not replaceable or repairable. Tips: 1 - use 8850 as a paperwheight 2 - throw it against a wall and see how much damage it can still take 3 - Wait until someone brings you a dead 8850,fix it,swop pcb.NOW YOU HAVE A WORKING 8850,YEAH!!!! he,he,he,he,he

09-01-2002, 15:11	#4 (permalink)
fantom Freak Poster Join Date: May 2002 Location: LB Age: 48 Posts: 185 Member: 11726 Status: Offline Thanks Meter: 10	Hello Sorry 8m you have faulty MAD2 & you must replaced & ther is a solution for the glue around the MAD2,i use a fluid i by it from somone & it's solve the glue & remove it at all so ask the stores in your country. I wich to you a good luck FANTOM