f**cing 3410 - GSM-Forum

fesak417 · 09-20-2004, 18:31

Hello! I get 3410 to unlock. it was bought in austria in 23205 one mobile site. First I tried to unlock with dct3 calc but no luck. I tried eeprom tool 3.1, 4.0, knok.... everything i have in my comp. nothight. always says "SIM ungültig"... so i tried flash it but nothing else matter.... If any one know where i can find FULLY FULL FLASH v 5.30 (MCU PPM, EEP) with slovak language tell me about that.

Thanx a lot.

09-20-2004, 18:45

Hi, mate i got the complete package NHM-2 5.42
Language package: L

- English
- Slovakia
- German
- Czech

fesak417 · 09-21-2004, 07:22

Quote:

Originally Posted by Araashs

Hi, mate i got the complete package NHM-2 5.42
Language package: L

- English
- Slovakia
- German
- Czech

Can u send me it? Is it with eeprom too? 200000-600000 . My mail : fesak417@azet.sk

johny3310 · 09-21-2004, 07:30

I don't understund why are you trying to find full flash with PPM-L (slovakian).
Yust full flash it with ANY good full flash. If you don't have it, use working 3410
phoner and read it. When you got your phone alive, recalculate checksums and
preform all resets in KNOK. Then lash it with MCU/PPM with slovakian.

gbluez · 09-21-2004, 07:31

try www.moviltuning.net
(register first, 100000%free)

fesak417 · 09-21-2004, 10:08

Quote:

Originally Posted by johny3310

I don't understund why are you trying to find full flash with PPM-L (slovakian).
Yust full flash it with ANY good full flash. If you don't have it, use working 3410
phoner and read it. When you got your phone alive, recalculate checksums and
preform all resets in KNOK. Then lash it with MCU/PPM with slovakian.

coz that all doesn't works... always phone is locked to austria one site. so i would like to flash with working (unlocked) full flash.

johny3310 · 09-21-2004, 13:17

Quote:

Originally Posted by fesak417

coz that all doesn't works... always phone is locked to austria one site. so i would like to flash with working (unlocked) full flash.

You are wrong!
My solution allways work, 10000000000%.
Take one non-locked new phone and read full flash from it.
Then write this full flash to another phone, update FAID,
and you have cloned and unlocked phone.

When full-flashing phone you are erasing old eeprom and
simlock data and write new one.

Just remember to recalc FAID, set new IMEI (from sticker),
and do all resets in KNOK.

All that is tested .... so many times i cannot remember any more...

Regards!

fesak417 · 09-21-2004, 22:00

Quote:

Originally Posted by johny3310

You are wrong!
My solution allways work, 10000000000%.
Take one non-locked new phone and read full flash from it.
Then write this full flash to another phone, update FAID,
and you have cloned and unlocked phone.

When full-flashing phone you are erasing old eeprom and
simlock data and write new one.

Just remember to recalc FAID, set new IMEI (from sticker),
and do all resets in KNOK.

All that is tested .... so many times i cannot remember any more...

Regards!

yeah .... i believe you right but i dont have any other non-locked phone .... that is my prob...so i need full flash....

mestrini · 09-22-2004, 02:54

If you can flash a phone to change its lang pack then probably you have both flasher and MBUS cables (to update FAID). This means that you can simply unlock the phone using any noktool ( neb's DCT3 repair partner or Rolis 1.9 ) with the MBUS cable (goes in the COM port).
Or have you already tried it without success?

fesak417 · 09-22-2004, 08:24

Quote:

Originally Posted by mestrini

If you can flash a phone to change its lang pack then probably you have both flasher and MBUS cables (to update FAID). This means that you can simply unlock the phone using any noktool ( neb's DCT3 repair partner or Rolis 1.9 ) with the MBUS cable (goes in the COM port).
Or have you already tried it without success?

Of course i tried that all.... but this f**king cell alway lock .... so i need full flash (200000-600000). I tried calc so phone return that is restrickted(unlocked) resets ... i insert card and again its locked to 23205. f**king austria site...

PS: i didnt have this problem yet ....

fesak417 · 09-23-2004, 11:35

Thanks to all who tried to help me but most thansk to : http://www.restech.pl/upload/ . where i found what i want (full flash 200000-600000 on nokia 3410)

09-20-2004, 18:31	#1 (permalink)
fesak417 Junior Member Join Date: Mar 2004 Location: slovakia, kosice Age: 30 Posts: 30 Member: 59573 Status: Offline Thanks: 0 Thanked 1 Time in 1 Post	fking 3410** Hello! I get 3410 to unlock. it was bought in austria in 23205 one mobile site. First I tried to unlock with dct3 calc but no luck. I tried eeprom tool 3.1, 4.0, knok.... everything i have in my comp. nothight. always says "SIM ungültig"... so i tried flash it but nothing else matter.... If any one know where i can find FULLY FULL FLASH v 5.30 (MCU PPM, EEP) with slovak language tell me about that. Thanx a lot.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
bbbbbbb 3410 3410 3410 any one team solve now	musmankhurshi	Z3X-Team Products	3	03-15-2010 08:21
wanted nokia 3410 and 3310 lcd boards also 3310/3410 batteries	cameraman	Wanted Products	4	09-04-2004 20:31
Nhm2 3410	James	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	45	08-18-2002 07:13
new fw. 3410 v3.06	bRAd	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	9	05-29-2002 18:15
6510, 6310, 3410, or 3510 (or etc.) startup logo	skynet	Nokia Digital Core Technology 4 ( DCT-4 )	4	05-28-2002 18:31

09-20-2004, 18:45	#2 (permalink)
arash111 Guest Posts: n/a Member:	Hi, mate i got the complete package NHM-2 5.42 Language package: L - English - Slovakia - German - Czech

09-21-2004, 07:30	#4 (permalink)
johny3310 Freak Poster Join Date: Jul 2002 Location: Croatia Age: 38 Posts: 497 Member: 14004 Status: Offline Thanks: 6 Thanked 6 Times in 5 Posts	I don't understund why are you trying to find full flash with PPM-L (slovakian). Yust full flash it with ANY good full flash. If you don't have it, use working 3410 phoner and read it. When you got your phone alive, recalculate checksums and preform all resets in KNOK. Then lash it with MCU/PPM with slovakian.

09-21-2004, 07:31	#5 (permalink)
gbluez Product Supporter Join Date: Jul 2004 Posts: 10,923 Member: 73565 Status: Offline Thanks: 397 Thanked 5,026 Times in 2,215 Posts	try www.moviltuning.net (register first, 100000%free)

09-22-2004, 02:54	#9 (permalink)
mestrini Insane Poster Join Date: Jun 2003 Location: somewhere inside my phone Posts: 76 Member: 32545 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	If you can flash a phone to change its lang pack then probably you have both flasher and MBUS cables (to update FAID). This means that you can simply unlock the phone using any noktool ( neb's DCT3 repair partner or Rolis 1.9 ) with the MBUS cable (goes in the COM port). Or have you already tried it without success?

09-23-2004, 11:35	#11 (permalink)
fesak417 Junior Member Join Date: Mar 2004 Location: slovakia, kosice Age: 30 Posts: 30 Member: 59573 Status: Offline Thanks: 0 Thanked 1 Time in 1 Post	Thanks to all who tried to help me but most thansk to : http://www.restech.pl/upload/ . where i found what i want (full flash 200000-600000 on nokia 3410)