Fbus / Mbus - GSM-Forum

rblake · 10-16-2003, 09:56

Hi,

I bought Logomanager some time ago and the cable that came with it is, I think, an FBUS.

Is this the same as an MBUS?

If not, can I convert it or is that a stupid question?

Cheers,

R.

Medz · 10-17-2003, 23:44

Sometimes cables comes with a switch ,enables changing between Fbus and Mbus. But as U have one type cable it will be
difficult to modulate it caus the "Com" connector will be seald on
the chip and the components,and U need to add external wire,
and finally the switch. All of this after knowing the schematic of
the Com modulator,and designing U'r modification .

Khayyal · 10-18-2003, 00:33

you don't have to convert the cable, you can change the connection from LM software and chose whitch cable you are using fbus or mbus

rblake · 10-18-2003, 08:35

Is this the same if I use Noktools, say? It will automatically use MBus functions through the cable?

Cheers,

R.

10-16-2003, 09:56	#1 (permalink)
rblake Junior Member Join Date: Oct 2003 Location: Cornwall, UK Age: 50 Posts: 11 Member: 41761 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	Fbus / Mbus Hi, I bought Logomanager some time ago and the cable that came with it is, I think, an FBUS. Is this the same as an MBUS? If not, can I convert it or is that a stupid question? Cheers, R.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
8800 series fbus/mbus cable?	topkat0	Nokia Digital Core Technology 4 ( DCT-4 )	8	08-21-2005 09:48
Fbus/Mbus schematics?	Blunty	Nokia Hardware & Hardware-Repair Area	3	06-03-2001 01:59
FBUS/MBUS 8110	Bronk	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	1	03-15-2000 18:16
Fbus/Mbus Cable	Aldrin	Nokia Hardware & Hardware-Repair Area	0	01-26-2000 03:22
fbus-mbus	ratzfatz	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	1	06-05-1999 13:46

10-17-2003, 23:44	#2 (permalink)
Medz No Life Poster Join Date: Sep 2003 Age: 55 Posts: 808 Member: 39601 Status: Offline Thanks: 0 Thanked 13 Times in 11 Posts	Sometimes cables comes with a switch ,enables changing between Fbus and Mbus. But as U have one type cable it will be difficult to modulate it caus the "Com" connector will be seald on the chip and the components,and U need to add external wire, and finally the switch. All of this after knowing the schematic of the Com modulator,and designing U'r modification .

10-18-2003, 00:33	#3 (permalink)
Khayyal Freak Poster Join Date: Oct 2002 Location: Egypt Age: 46 Posts: 304 Member: 17337 Status: Offline Thanks: 35 Thanked 12 Times in 9 Posts	you don't have to convert the cable, you can change the connection from LM software and chose whitch cable you are using fbus or mbus

10-18-2003, 08:35	#4 (permalink)
rblake Junior Member Join Date: Oct 2003 Location: Cornwall, UK Age: 50 Posts: 11 Member: 41761 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	Is this the same if I use Noktools, say? It will automatically use MBus functions through the cable? Cheers, R.