flasher problem

[Devils-thoughts]

every time i try to read a phone program say (boot tx data error) what is wrong

[ahmed]

you have a short circuit some where .

[Devils-thoughts]

when i use nu200 no problem i can unlock the phone but when i use darkshell flasher now i get phone ram is bad what is wrong guy's help me pls to solve the problem

[raivenz]

what processor are you using?<br /> if AMD processor` well maybe thats the problem. <img src="tongue.gif" border="0"> <img src="tongue.gif" border="0"> <img src="tongue.gif" border="0">

[fox]

Yes frind , what processor are you using ??<br /> And which phone you try to unlock , then you have to choise which loader you must use .<br /> Good luck

[Devils-thoughts]

i use amd 1ghz but the program has always worked but after a hd crash i put new hd in system and install everything again and now it give's me error by every phone i try to unlock<br /> <img src="mad.gif" border="0"> <img src="mad.gif" border="0"> <img src="mad.gif" border="0"> <img src="mad.gif" border="0"> <img src="mad.gif" border="0">

[ahmed]

can anyone explain this strange problem , I have 3 flasher (dejan) cables , 2 are Handbuilt and 1 is a factory cable , the 1 handbuilt and factory <br />cable will not work with NU2000 (check cable or remove batt) error , however the other Handbuilt cable in which i forgot to include the condensor when buliding the cable works 100% with NU2000 ,

all 3 cables works 100% with the dejan flasher ,

does anyone have an explaination