GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > GSM & CDMA Phones / Tablets Software & Hardware Area > Nokia > Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )

Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) Nokia Legacy Models Like 1011, 1610, 211x, 2x20, 6050, 3110, 8110, NKxxx , 2100, 3210, 3310, 3330, 3410, 5110, 5210, 5510, 6110, 6150, 6210, 6250, 7110, 8210, 8250, 8850 also 9110 & 9210

Reply
 
LinkBack Thread Tools Display Modes
Old 01-28-2001, 04:29   #1 (permalink)
Junior Member
 
Join Date: Jan 2001
Posts: 9
Member: 3161
Status: Offline
Thanks Meter: 11
Post Full Flash 5130 V05.61


Does anyone have this file extracted with dejan flasher and could send it to me? Also other .fls for 5130 above 05.00 is welcome.

Please no partial flashes.

Thanks in advance.

Peter
  Reply With Quote
Old 01-29-2001, 02:35   #2 (permalink)
No Life Poster
 
Charly's Avatar
 
Join Date: Sep 2000
Location: UK York
Age: 56
Posts: 730
Member: 2008
Status: Offline
Thanks Meter: 4
Post

DONT full flash this phone I can supply you with backup of it but it will make your phone goto "CS" write to me and ill try to help you.

Charlie

  Reply With Quote
Old 01-29-2001, 20:02   #3 (permalink)
Junior Member
 
Join Date: Jan 2001
Posts: 9
Member: 3161
Status: Offline
Thanks Meter: 11
Post

Quote:
Originally posted by Charly:
DONT full flash this phone I can supply you with backup of it but it will make your phone goto "CS" write to me and ill try to help you.

Charlie


Thanks for your answer. I tried to full flash with 5130 05.00, phone shows false lock information but no cs. It's important, that you ONLY switch on phone but without sim or without entering PIN code. Then there is no CS. So since 05.00 for 5130 doesn't work for 5130 05.71, I tried 05.24 for 5110! full flash. I switched phone on, didn't enter PIN code, connect to nokia tool by pro 034, unlocked it (1 click at each closed lock), switched phone off, reflashed full with 05.71 for 5130. Switched phone on, entered PIN code, phone is open on all locks and finds network.

100% solution!

Best regards, Peter.
  Reply With Quote
The Following 2 Users Say Thank You to nokia_flash For This Useful Post:
Old 01-29-2001, 20:59   #4 (permalink)
Freak Poster
 
Join Date: Sep 1999
Posts: 258
Member: 508
Status: Offline
Thanks Meter: 4
Post

Why not full flash?
51xx eeprom is outside flash - so you canīt destroy anything.
  Reply With Quote
The Following User Says Thank You to MyKe For This Useful Post:
Old 01-30-2001, 01:22   #5 (permalink)
No Life Poster
 
Charly's Avatar
 
Join Date: Sep 2000
Location: UK York
Age: 56
Posts: 730
Member: 2008
Status: Offline
Thanks Meter: 4
Thumbs up

Yes very clever it will work only because you can unlock this phone without dejan, this will not work on later phones and differant models but all the same it does work if you think at it logically.

Well done

Charlie

ps wish i could do the same withh 3310's


Quote:
Originally posted by MyKe:
Why not full flash?
51xx eeprom is outside flash - so you canīt destroy anything.
  Reply With Quote
The Following User Says Thank You to Charly For This Useful Post:
Old 06-26-2011, 12:49   #6 (permalink)
Registered User
 
Join Date: Sep 2008
Location: HardWare+Software & Unlocking
Posts: 2,026
Member: 865598
Status: Offline
Sonork: 100.1609492
Thanks Meter: 465
Version from phone: 07.97
Version from file: 07.97
MXKEY Serial: [MxKey Team HTI Flasher Interface (WinUSB) 3] - C0853AF5
Using device: HTI BOX, FW ver: 00.17
Driver: uhci:hub:ccgp:WinUSB, ver: 3.5.0.0
Module ver: 1.0.0.17743(23-06-2011), Library ver: 1.0.0.11773(23-06-2011)
Reading Important data ...
Invalid imei plain, RPL backup skipped.
CMT Data :
SYSTEM ASIC ID: 000000010000022600010006030C192101033000 [RAP3G ver: PA 3.x]
EM0 ID: 00000296
EM1 ID: 00000B22
PUBLIC ID: 08E000144A1E8A56D5FF4B61BCF28E1F6ED59133
ASIC MODE ID: 00
ROOT KEY HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
ROM ID: 273F6D55DFAAF68F
SecondaryBoot: rap3gv3_2nd.fg [BB5] version: 9.11.1 revision: 0.0 size: 0x3C00
Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
Storage0: 0089 8982 - 0000 8A31 [Intel NU48F512,512 Mbits] type: FLASH,NOR, asic:CMT
Storage content: 0000 0000 0000 0000 0000 0000 0000 0000
Storage1: FFFF 0000 - 0000 0000 type: MMC, asic:CMT
TransmissionMode: 16Bit
Algorithm: RAP3Gv3_algo.fg [BB5 ALGORITHM] version: 9.50.0 revision: 0.0 size: 0x23010
Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0003192101002000, 000C192101002000, 0003192101002100, 000C192101002100, 0003192101002200, 000C192101002200, 0003192101012200, 000C192101012200, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
CMT PAPUBKEYS HASH: 0C917F11196FDB7378C18EF7260698CA4489DCA0
TransmissionMode: DDR&TX2
Processing MCU file: rm495__07.97.mcusw
[BB5,BB5 ALGORITHM] size: 18.20 MB
Supported Ids: 010C192101013000, 0103192101003000, 0303192101033000, 030C192101033000
Storing certificate [NPC, VARIANT, R&D, CCC, HWC] ...OK
Erase size: 21 MB
CMT FLASH,NOR area [00000000-000006BF]
CMT FLASH,NOR area [000006C0-0001FFFF]
CMT FLASH,NOR area [00040000-000BFFFF]
CMT FLASH,NOR area [000C0000-0013FFFF]
CMT FLASH,NOR area [00140000-0137FFFF]
CMT FLASH,NOR area [01380000-0151FFFF]
erased in 1 min 56.719 s
Flash programming ...
CMT NOLO block sent
CMT KEYS block sent
CMT PRIMAPP block sent
CMT PASUBTOC block sent
CMT PAPUBKEYS: 0C917F11 [RAP Certificate 164 v.1] sent
CMT UPDAPP block sent
CMT DSP0 block sent
CMT MCUSW block sent
Programming completed in 1 min 35.078 s
Processing PPM file: rm495__07.97.ppm_mena_a1
[BB5,BB5 ALGORITHM] size: 6.07 MB
Supported Ids: 010C192101013000, 0103192101003000, 0303192101033000, 030C192101033000
Erase size: 8.62 MB
CMT FLASH,NOR area [01520000-01DBFFFF]
erased in 37.062 s
Flash programming ...
Programming completed in 30.547 s
Processing CNT file: rm495__07.97.image_mena_a1_red
[BB5,BB5 ALGORITHM] page size: 128 K size: 10.26 MB
Supported Ids: 010C192101013000, 0103192101003000, 0303192101033000, 030C192101033000
Erase size: 34 MB
CMT FLASH,NOR area [01DC0000-0215FFFF]
CMT FLASH,NOR area [02160000-03FBFFFF]
erased in 2 min 43.547 s
Flash programming ...
Programming completed in 51.125 s
Total time for flashing process(boot+erase+write) was 8 min 28.891 s

Phone Type: RM-495 (Nokia 5130c-2)
SW Version: V 07.97 13-09-10 RM-495 (c) Nokia
Imei plain: 12345610654321-?
Battery voltage: 4800 mV, current: 72 mA
Language Pack:
- not available.

SIMLOCK invalid!
SUPERDONGLE_KEY invalid!
- WD timer enabled, phone will reboot itself after 3 min.
SIMLOCK_TEST passed
SECURITY_TEST passed


Imei plain is invalid !!!
SIMLOCK_DATA corrupted!
SIMLOCK_DATA corrupted
  Reply With Quote
Old 06-26-2011, 12:49   #7 (permalink)
Registered User
 
Join Date: Sep 2008
Location: HardWare+Software & Unlocking
Posts: 2,026
Member: 865598
Status: Offline
Sonork: 100.1609492
Thanks Meter: 465
Version from phone: 07.97
Version from file: 07.97
MXKEY Serial: [MxKey Team HTI Flasher Interface (WinUSB) 3] - C0853AF5
Using device: HTI BOX, FW ver: 00.17
Driver: uhci:hub:ccgp:WinUSB, ver: 3.5.0.0
Module ver: 1.0.0.17743(23-06-2011), Library ver: 1.0.0.11773(23-06-2011)
Reading Important data ...
Invalid imei plain, RPL backup skipped.
CMT Data :
SYSTEM ASIC ID: 000000010000022600010006030C192101033000 [RAP3G ver: PA 3.x]
EM0 ID: 00000296
EM1 ID: 00000B22
PUBLIC ID: 08E000144A1E8A56D5FF4B61BCF28E1F6ED59133
ASIC MODE ID: 00
ROOT KEY HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
ROM ID: 273F6D55DFAAF68F
SecondaryBoot: rap3gv3_2nd.fg [BB5] version: 9.11.1 revision: 0.0 size: 0x3C00
Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
Storage0: 0089 8982 - 0000 8A31 [Intel NU48F512,512 Mbits] type: FLASH,NOR, asic:CMT
Storage content: 0000 0000 0000 0000 0000 0000 0000 0000
Storage1: FFFF 0000 - 0000 0000 type: MMC, asic:CMT
TransmissionMode: 16Bit
Algorithm: RAP3Gv3_algo.fg [BB5 ALGORITHM] version: 9.50.0 revision: 0.0 size: 0x23010
Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0003192101002000, 000C192101002000, 0003192101002100, 000C192101002100, 0003192101002200, 000C192101002200, 0003192101012200, 000C192101012200, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
CMT PAPUBKEYS HASH: 0C917F11196FDB7378C18EF7260698CA4489DCA0
TransmissionMode: DDR&TX2
Processing MCU file: rm495__07.97.mcusw
[BB5,BB5 ALGORITHM] size: 18.20 MB
Supported Ids: 010C192101013000, 0103192101003000, 0303192101033000, 030C192101033000
Storing certificate [NPC, VARIANT, R&D, CCC, HWC] ...OK
Erase size: 21 MB
CMT FLASH,NOR area [00000000-000006BF]
CMT FLASH,NOR area [000006C0-0001FFFF]
CMT FLASH,NOR area [00040000-000BFFFF]
CMT FLASH,NOR area [000C0000-0013FFFF]
CMT FLASH,NOR area [00140000-0137FFFF]
CMT FLASH,NOR area [01380000-0151FFFF]
erased in 1 min 56.719 s
Flash programming ...
CMT NOLO block sent
CMT KEYS block sent
CMT PRIMAPP block sent
CMT PASUBTOC block sent
CMT PAPUBKEYS: 0C917F11 [RAP Certificate 164 v.1] sent
CMT UPDAPP block sent
CMT DSP0 block sent
CMT MCUSW block sent
Programming completed in 1 min 35.078 s
Processing PPM file: rm495__07.97.ppm_mena_a1
[BB5,BB5 ALGORITHM] size: 6.07 MB
Supported Ids: 010C192101013000, 0103192101003000, 0303192101033000, 030C192101033000
Erase size: 8.62 MB
CMT FLASH,NOR area [01520000-01DBFFFF]
erased in 37.062 s
Flash programming ...
Programming completed in 30.547 s
Processing CNT file: rm495__07.97.image_mena_a1_red
[BB5,BB5 ALGORITHM] page size: 128 K size: 10.26 MB
Supported Ids: 010C192101013000, 0103192101003000, 0303192101033000, 030C192101033000
Erase size: 34 MB
CMT FLASH,NOR area [01DC0000-0215FFFF]
CMT FLASH,NOR area [02160000-03FBFFFF]
erased in 2 min 43.547 s
Flash programming ...
Programming completed in 51.125 s
Total time for flashing process(boot+erase+write) was 8 min 28.891 s

Phone Type: RM-495 (Nokia 5130c-2)
SW Version: V 07.97 13-09-10 RM-495 (c) Nokia
Imei plain: 12345610654321-?
Battery voltage: 4800 mV, current: 72 mA
Language Pack:
- not available.

SIMLOCK invalid!
SUPERDONGLE_KEY invalid!
- WD timer enabled, phone will reboot itself after 3 min.
SIMLOCK_TEST passed
SECURITY_TEST passed


Imei plain is invalid !!!
SIMLOCK_DATA corrupted!
SIMLOCK_DATA corrupted
  Reply With Quote
The Following User Says Thank You to Naeem123e For This Useful Post:
Old 07-03-2011, 05:55   #8 (permalink)
Registered User
 
Join Date: Sep 2008
Location: HardWare+Software & Unlocking
Posts: 2,026
Member: 865598
Status: Offline
Sonork: 100.1609492
Thanks Meter: 465
Thumbs up 5130 usb full flash :D

MXKEY Serial: [FT SCR2000 0] - C08109BA
Driver: NMWCD, ver: 7.1.32.62
Module ver: 1.0.0.17743(23-06-2011), Library ver: 1.0.0.11773(23-06-2011)
Processing MCU file: rm495__07.97.mcusw
[BB5,BB5 ALGORITHM] size: 18.20 MB
Supported Ids: 010C192101013000, 0103192101003000, 0303192101033000, 030C192101033000
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB device ...
Device found: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: D74612
CMT SYSTEM ASIC ID: 000000010000022600010006030C192101033000 [RAP3G ver: PA 3.x]
CMT EM0 ID: 00000296
CMT EM1 ID: 00000B22
CMT PUBLIC ID: 0AC00117160F7E560C9B3E4D4896B387915F191D
CMT ASIC MODE ID: 00
CMT ROOT KEY HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT ROM ID: 273F6D55DFAAF68F
Flashing CMT Update Server Data, ULO: 0x3900 bytes
Update Server code succesfully sent to phone.
Flashing CMT Update Server Data, UPDAPP: 0x4B340 bytes
Update Server code succesfully sent to phone.
Flashing CMT Update Server Data, PASUBTOC: 0x59940 bytes
Update Server code succesfully sent to phone.
Device found: nmwcdnsuc\Nokia BB5 ADL Loader USB Generic, PORT_ID: 27398028
Verifying communication to device OK.
Erase size: 21 MB
CMT FLASH,NOR area [00000000-000006BF] erased in 0.656 s
CMT FLASH,NOR area [000006C0-0001FFFF] erased in 0.609 s
CMT FLASH,NOR area [00040000-000BFFFF] erased in 2.422 s
CMT FLASH,NOR area [000C0000-0013FFFF] erased in 2.375 s
CMT FLASH,NOR area [00140000-0137FFFF] erased in 1 min 27.109 s
CMT FLASH,NOR area [01380000-0151FFFF] erased in 7.719 s
Flash programming ...
CMT NOLO block sent
CMT KEYS block sent
CMT PRIMAPP block sent
CMT PASUBTOC block sent
Selecting first CMT PAPUB block with matching RootKey.
CMT PAPUBKEYS: 0C917F11 [RAP Certificate 164 v.1] sent
CMT UPDAPP block sent
CMT DSP0 block sent
CMT MCUSW block sent
Programming completed in 1 min 7.313 s
Processing PPM file: rm495__07.97.ppm_mena_a1
[BB5,BB5 ALGORITHM] size: 6.07 MB
Supported Ids: 010C192101013000, 0103192101003000, 0303192101033000, 030C192101033000
Erase size: 8.62 MB
CMT FLASH,NOR area [01520000-01DBFFFF] erased in 41.047 s
Flash programming ...
Programming completed in 27.532 s
Processing CNT file: rm495__07.97.image_mena_a1_red
[BB5,BB5 ALGORITHM] page size: 128 K size: 10.26 MB
Supported Ids: 010C192101013000, 0103192101003000, 0303192101033000, 030C192101033000
Erase size: 34 MB
CMT FLASH,NOR area [01DC0000-0215FFFF] erased in 22.360 s
CMT FLASH,NOR area [02160000-03FBFFFF] erased in 3 min 26.546 s
Flash programming ...
Programming completed in 39.406 s
Total time for flashing process(boot+erase+write) was 8 min 55.938 s
Waiting for device boot up ...
Device found: nmwcdc\Nokia 5130 XPressMusic USB Phonet, PORT_ID: 375B2DD3
Verifying communication to device OK.


Phone Type: RM-495 (Nokia 5130c-2)
SW Version: V 07.97 13-09-10 RM-495 (c) Nokia
Imei plain: 35422303032732-4
Product Code: 0576625
Battery voltage: 3994 mV, current: 64 mA
Language Pack:
- not available.

Detected as PA_SL3 phone.
- Avoid SW Downgrade & manual erase to this phone !

SIMLOCK seems to be valid
SUPERDONGLE_KEY seems to be valid
CMLA_KEY seems to be valid
WMDRM_PD seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST passed


Imei net: 354223030327324
Version: SIMLOCK SERVER
Counter: 0/3, 0/10

CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000

BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
  Reply With Quote
Old 07-03-2011, 15:38   #9 (permalink)
Registered User
 
Join Date: Sep 2008
Location: HardWare+Software & Unlocking
Posts: 2,026
Member: 865598
Status: Offline
Sonork: 100.1609492
Thanks Meter: 465
help me

MXKEY Serial: [MxKey Team HTI Flasher Interface (WinUSB) 4] - C0853AF5
Using device: HTI BOX, FW ver: 00.17
Driver: uhci:hub:ccgp:WinUSB, ver: 3.5.0.0
Module ver: 1.0.0.17743(23-06-2011), Library ver: 1.0.0.11773(23-06-2011)
CMT Data :
SYSTEM ASIC ID: 000000010000022600010006030C192101033000 [RAP3G ver: PA 3.x]
EM0 ID: 00000296
EM1 ID: 00000B22
PUBLIC ID: 09F00015BFA68D56490093A53BE9D1D410998659
ASIC MODE ID: 00
ROOT KEY HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
ROM ID: 273F6D55DFAAF68F
SecondaryBoot: rap3gv3_2nd.fg [BB5] version: 9.11.1 revision: 0.0 size: 0x3C00
Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
Storage0: 00EC 2400 - 0000 8A31 [Samsung ] type: FLASH,NOR, asic:CMT
Storage content: 0000 0000 0000 0000 0000 0000 0000 0000
Storage1: FFFF 0000 - 0000 0000 type: MMC, asic:CMT
TransmissionMode: 16Bit
Algorithm: RAP3Gv3_algo.fg [BB5 ALGORITHM] version: 9.50.0 revision: 0.0 size: 0x23010
Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0003192101002000, 000C192101002000, 0003192101002100, 000C192101002100, 0003192101002200, 000C192101002200, 0003192101012200, 000C192101012200, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
CMT PAPUBKEYS HASH: 0C917F11196FDB7378C18EF7260698CA4489DCA0
TransmissionMode: DDR&TX2
Processing MCU file: rm495__07.95.mcusw
[BB5,BB5 ALGORITHM] size: 18.20 MB
Supported Ids: 010C192101013000, 0103192101003000, 0303192101033000, 030C192101033000
Storing certificate [NPC, VARIANT, R&D, CCC, HWC] ...OK
Erase size: 21 MB
CMT FLASH,NOR area [00000000-000006BF]
CMT FLASH,NOR area [000006C0-0001FFFF]
CMT FLASH,NOR area [00040000-000BFFFF]
CMT FLASH,NOR area [000C0000-0013FFFF]
CMT FLASH,NOR area [00140000-0137FFFF]
CMT FLASH,NOR area [01380000-0151FFFF]
erased in 1 min 13.562 s
Flash programming ...
CMT NOLO block sent
CMT KEYS block sent
CMT PRIMAPP block sent
CMT PASUBTOC block sent
CMT PAPUBKEYS: 0C917F11 [RAP Certificate 164 v.1] sent
CMT UPDAPP block sent
CMT DSP0 block sent
CMT MCUSW block sent
Programming completed in 1 min 27.078 s
Processing PPM file: rm495__07.95.ppm_mena_b
[BB5,BB5 ALGORITHM] size: 6.31 MB
Supported Ids: 010C192101013000, 0103192101003000, 0303192101033000, 030C192101033000
Erase size: 8.62 MB
CMT FLASH,NOR area [01520000-01DBFFFF]
erased in 26.562 s
Flash programming ...
Programming completed in 32.391 s
Processing CNT file: rm495__07.95.image_mena_b_blu
[BB5,BB5 ALGORITHM] page size: 128 K size: 8.26 MB
Supported Ids: 010C192101013000, 0103192101003000, 0303192101033000, 030C192101033000
Erase size: 34 MB
CMT FLASH,NOR area [01DC0000-0215FFFF]
CMT FLASH,NOR area [02160000-03FBFFFF]
erased in 56.797 s
Flash programming ...
Programming completed in 40.094 s
Total time for flashing process(boot+erase+write) was 6 min 3.266 s

Phone not responding !
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
thread Thread Starter Forum Replies Last Post
Nokia 5130 V05.71 unlock with 5110 V05.24 !!!!! nokia_flash Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 11 03-20-2010 21:45
5130 5.61 DSP-3 full need roniri Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 4 11-30-2001 23:30
Urgenttly need full flash 5130 5.71 rerednaw Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 1 05-23-2001 16:59
Nokia 5130 Fill Flash V05.61 nokia_flash Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 0 01-28-2001 04:32

 



All times are GMT +1. The time now is 06:53.



Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.22180 seconds with 9 queries

SEO by vBSEO